Elektri- ja akutööriistad, tööpingid

GRAPHITE's 56T402 Hex 5.0 mm concrete drill bit 56T402 is a hex shank HEX drill bit with a diameter of 5 mm, an overall length of 85 mm and a working length of 37 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.

Saw blade, widia, 250 x 30 mm, 100 teeth, for aluminium 57T236 by GRAPHITE, with an external diameter of 250 mm and a mounting hole diameter of 30 mm. It has 100 teeth and the cut width is 2.6 mm. The maximum speed is 7,000 rpm. It is characterised by a clean cut. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting aluminium. The reduction rings included in the package allow the blade to be used with most saw models.

Sanding discs, perforated, on Velcro with holes 225 mm, P180, 5 pieces 58T276 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.

Velcro sanding discs 150 mm, P120, 5 pieces, with 8 holes 58T285 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.

Glass drill bit 5 mm 54T413 by GRAPHITE characterised by a diameter of 5 mm and an overall length of 69 mm. Equipped with a 3.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.

GRAPHITE's 57T304 solid diamond cutting wheel, 230 x 22.2 mm, wet 57T304 is a solid diamond cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.6 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.

Sanding grid 115 x 280 mm, P40 58T150 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

Sanding grid 115 x 280 mm, P80 58T152 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

Sanding grid 115 x 280 mm, P180 58T156 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

Velcro sanding papers 93 x 185 mm, P240, 5 pieces, with 8 holes 58T248 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.

Sanding cloth 230 x 280 mm, P240, 58T351 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for final smoothing of coatings.

GRAPHITE's 57T326 diamond grinding wheel, turbo, 115 x 22.2 mm, dry 57T326 is designed for dry use. Reduction rings are included. The disc has a diameter of 115 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 13 600 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone. The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.

Saw blade, widia, 250 x 30 mm, 40 teeth 57T231 by GRAPHITE, with an external diameter of 250 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 7,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

Velcro sanding papers 93 x 185 mm, P220, 5 pieces, with 8 holes 58T247 by GRAPHITE is a paper designed for sanding metal, wood and plastics. It has 8 holes for effective dust extraction during work. It uses a type C paper base, suitable for machine sanding. The surface is coated with semi-open grain electro-corundum, where the abrasive grain provides 100% coverage. The Velcro attachment makes it easy to change GRAPHITE paper quickly and conveniently while working.

Endless belts 75 x 457 mm, P150, 3 pcs. 58T365 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and a grain of electro-corundum. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.

The Hex chamfer, 6 mm 54T417 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.

GRAPHITE's 12mm 56T729 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

GRAPHITE's 30mm bi-metal hole saw 56T706 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 285 rpm, Inox steel - 145 rpm, aluminium - 425 rpm, wood - 410 rpm, cast iron - 190 rpm, brass - 380 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.

Saw blade, widia, 160 x 30 mm, 30 teeth 57T210 by GRAPHITE, with an external diameter of 160 mm and a mounting hole diameter of 30 mm. It has 30 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 11,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.