Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Piiksae tera, BIM, 152 x 19 x 0,9 mm, 18 TPI

02-57T561

The sabre saw blade, BIM 152 x 19 x 0.9 mm, 18 TPI, 57T561 by GRAPHITE is a bi-metal (BIM) blade with an overall length of 152 mm, a width of 19 mm and a thickness of 0.9 mm. It has 18 teeth per inch (TPI) and a tooth spacing of 1.4 mm. It is designed for straight cutting of thin sheet metal 1.5-4 mm thick, open and closed tubes, as well as profiles from 5 to 100 mm in diameter. The flexible design of the GRAPHITE blade allows it to work in harder to reach places.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Turbo teemantlõikeketas 150 × 22,22 mm, kuivlõikuseks

02-57T319

GRAPHITE turbo teemantlõikeketas on mõeldud kuivlõikamiseks ning selle läbimõõt on 150 mm ja kinnitusava läbimõõt 22,2 mm. Komplekti kuulub praktiline reduktsioonirõngas.

Lõikesegment on 7 mm kõrge ja 2,4 mm lai. Ketta maksimaalne pöörlemiskiirus on 10 000 p/min, mis vastab perifeersele kiirusele 80 m/s.

Ketas vastab standardi EN 13236 nõuetele ning sobib järgmiste materjalide lõikamiseks:

kivi
tellis
marmor
graniit
betoon

Tegemist on vastupidava ja tõhusa lõikekettaga professionaalseks ning nõudlikuks kasutamiseks ehitus- ja remonditöödel.

5,70€

Laost otsas. Tellides tarneaeg nädalat

Otsikute komplekt SL3/4/5/6, PH1/2/3, PZ1/2/3, TX10/15/20/25/27/30 × 25 mm, 16 tk

02-56T556

Komplekti kuuluvad:

SL: SL3, SL4, SL5, SL6
PH: PH1, PH2, PH3
PZ: PZ1, PZ2, PZ3
Torx: TX10, TX15, TX20, TX25, TX27, TX30

7,30€

Laost otsas. Tellides tarneaeg nädalat

Abrasiivvõrk 115 x 280 mm, P220

02-58T157

Sanding grid 115 x 280 mm, P220 58T157 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features a double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

0,298€

Laost otsas. Tellides tarneaeg nädalat

Kausshari 70 mm, laineline terastraat, 6 mm vars

02-57T416

The 70 mm, crimped wire, steel butt brush with 6 mm shank 57T416 by GRAPHITE is made of crimped steel wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.

2,41€

Laost otsas. Tellides tarneaeg nädalat

Tikksaetera, 6 TPI, HCS, U-kinnitus, 2 tk, jäme lõige

02-57T528

Jigsaw blade, 6 TPI, HCS, U-type handle, 2 pieces, coarse cutting 57T528 by GRAPHITE is a jigsaw tool with a toothing density of 6 TPI. Made from HCS, it has a U type handle. Comes in a 2 piece set. The GRAPHITE brand blade has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.2 mm and a tooth spacing of 4 mm. It is characterised by its wide application for working with softwood (5-50 mm), chipboard, carpentry plywood and fibreboard. Designed for fast and rough cutting.

1,50€

Laost otsas. Tellides tarneaeg nädalat

Nailonist esihari 65 mm, 6 mm vars

02-57T419

The 65 mm nylon butt brush with 6 mm shank 57T419 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many woodworking tasks.

6,70€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur astmega 4/6 mm

02-54T400

GRAPHITE's 4/6 mm 54T400 confirmat drill bit characterised by an overall length of 75 mm and a working part length of 45 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every DIY enthusiast.

4,50€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber rullis kollane 2,5 m x 115 mm, P40

02-58T420

GRAPHITE's yellow sanding paper in roll 2.5 m x 115 mm, P40, 58T420 is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and gypsum sanding trowels.

1,80€

Laost otsas. Tellides tarneaeg nädalat

Otsikute komplekt 25 mm, magnetilise otsikuhoidikuga 60 mm, 100 tk

02-56T515

Komplekti kuuluvad:

SL: SL3, SL4, SL4.5, SL5, SL5.5, SL6, SL6.5, SL7, SL8
PH: PH0, PH1, PH2, PH2, PH2, PH3
PZ: PZ0, PZ1, PZ2, PZ2, PZ2, PZ2, PZ3
Kuuskant: H1.5, H2, H2.5, H3, H4, H5, H5.5, H6, H8, 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4"
Turvakuuskant: HH2, HH2.5, HH3, HH4, HH5, HH6, 5/64", 3/32", 7/64", 1/8", 9/64", 5/32"
Ruutotsikud: SQ0, SQ1, SQ2, SQ3
Clutch: CG1, CG2, CG3
Torx: T8, T10, T15, T20, T25, T27, T30, T40, T45
Turva-Torx: TT8, TT10, TT15, TT20, TT25, TT27, TT30, TT35, TT40
Torq-Set: TS6, TS8, TS10
Tri-Wing: TW1, TW2, TW3, TW4
Spanner: SP5, SP6, SP8
Nut Setter: SN4, SN6, SN8, SN10
60 mm magnetiline otsikuhoidik
Konksotsik (hook screwdriver bit)
1/4" HEX → 1/4" kandiline adapter 25 mm
1/4" HEX → 1/4" kandiline adapter 50 mm
1/4" HEX → 1/4" kandiline adapter sisemise padruniga 25 mm

14,69€

Laost otsas. Tellides tarneaeg nädalat

Tikksae terade komplekt, 6 TPI, 10 TPI, 12 TPI, 20 TPI, HCS, T-kinnitus, 5 tk

02-57T540

Jigsaw blade set, 6 TPI, 10 TPI, 12 TPI, 20 TPI, HCS, T-handle, 5 pcs. 57T540 by GRAPHITE is a set which includes: 1x 57T543 jigsaw blade, with 12 TPI tooth density, HCS material and T-type handle. Characterised by an overall length of 76 mm, a working length of 50 mm, a width of 5.2 mm, a thickness of 1 mm and a tooth pitch of 2 mm. Applications: softwood (2-15 mm), plywood, chipboard, carpentry plywood, fibreboard, for curved cuts, basic cutting. The GRAPHITE set also includes 1x 57T544 jigsaw blade, with a tooth density of 21 TPI, in HCS material and with a T-shaped handle. The 2 pieces in the set are characterised by an overall length of 76 mm, working length of 50 mm, width of 8 mm, thickness of 1 mm and tooth spacing of 1.2 mm. Application: thin sheet metal (1-3 mm), basic cutting. The set also offers 1x 57T545 jigsaw blade, with 6 TPI tooth density, in HCS material and with T-shaped handle. Tool with overall length 100 mm, working length 74 mm, width 8 mm, thickness 1.2 mm and tooth pitch 4 mm. Application: softwood (5-50 mm), chipboard, plywood, fibreboard, fast cutting, coarse cutting. Set also consists of 1x 57T546 jigsaw blade, tooth density 21 TPI, HCS material and T-shaped handle. Overall length 76 mm, working length 50 mm, width 8 mm, thickness 1 mm and tooth pitch 1.2 mm. Applications: softwood (1.5-15 mm), plywood, chipboard, carpentry plywood, fibreboard, basic cutting. The GRAPHITE brand set also offers 1x 57T549 jigsaw blade, with 10 TPI tooth density, HCS material and T-shaped handle. It features an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 2.5 mm. Applications: softwood, chipboard, joinery plywood, fibreboard (3-30 mm), plastic/epoxy (diameter <30 mm), clean cutting.

3,20€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur, pikk 20 x 250 mm

02-54T572

The Wood Drill, Extended 20 x 250 mm 54T572 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 20 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 800 rpm. It will work well for many DIY tasks.

7,80€

Laost otsas. Tellides tarneaeg nädalat

Klaasipuur 3 mm

02-54T411

GRAPHITE glass drill bit 3 mm 54T411 characterised by a diameter of 3 mm and an overall length of 67 mm. Equipped with a cylindrical shank of 2.8 mm. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.

1,80€

Laost otsas. Tellides tarneaeg nädalat

Laagriga dekoratiivne puidufrees, kõvasulamiga, 38,1 × 19 mm, vars 8 mm

02-56T611

Wood router bit with bearing, decorative, widia, 38.1 x 19 mm, shank 8 mm 56T611 by GRAPHITE is a router bit with unscrewable bearing, with a blade diameter of 38.1 mm, a height of 19 mm and an overall length of 60 mm. Its radius is 12.7 mm. It is also equipped with an 8 mm long shank. The cutter is made of tungsten carbide (TCT), ensuring durability and precision. With two cutting edges, it is ideal for making straight grooves, grooves and slots. It enables the rounding of the edges of wood and wood-based materials, so is suitable for carpentry and furniture work.

8,61€

Laost otsas. Tellides tarneaeg nädalat

Puidu faasipuur 4 mm / 16 mm

02-54T424

GRAPHITE's 4 mm/16 mm wood chamfer drill 54T424 is a tool characterised by a drill diameter of 4 mm, a chamfer diameter of 16 mm and an overall length of 75 mm. Equipped with a cylindrical chuck, it is recommended for drilling holes for countersunk mounting screws or for additional countersinking of holes. The GRAPHITE wood chamfer drill bit will make a good addition to any DIYer's equipment.

1,80€

Laost otsas. Tellides tarneaeg nädalat

Otsikute komplekt SL4, PH2, PZ1/2, TX20 × 100 mm, 5 tk

02-56T558

Komplekti kuuluvad:

Piluotsik (SL): SL4
Phillips (PH): PH2
Pozidriv (PZ): PZ1, PZ2
Torx (TX): TX20
Otsikute pikkus: 100 mm
1/4" HEX kinnitus

6,00€

Laost otsas. Tellides tarneaeg nädalat

Tikksaetera, 21 TPI, HCS, T-kinnitus, 2 tk

02-57T546

Jigsaw blade, 21 TPI, HCS, T-handle, 2 pieces 57T546 by GRAPHITE is a jigsaw blade with a tooth density of 21 TPI, made of HCS and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 8 mm, a thickness of 1 mm and a tooth spacing of 1.2 mm. Suitable for cutting softwood (1.5-15 mm), plywood, chipboard, carpentry plywood and fibreboard. The GRAPHITE brand blade allows for basic cutting.

1,10€

Laost otsas. Tellides tarneaeg nädalat

Kuuskant faasipuur 12 mm

02-54T420

The Hex chamfer, 12 mm 54T420 by GRAPHITE is a tool for making a chamfer in a drilled hole allowing the head of a screw or bolt to be hidden (flush) in the material - wood, aluminium and plastic. The chamfer has a ¼" HEX type handle and features an overall length of 40 mm. It will be suitable for screwdrivers and drill drivers. The chamfer from the GRAPHITE brand will make a good addition to every DIY enthusiast's toolbox.

2,70€

Laost otsas. Tellides tarneaeg nädalat

Tikksaetera, 12 TPI, HCS, U-kinnitus, 2 tk, kõverlõigeteks

02-57T523

Jigsaw blade, 12 TPI, HCS, U-shaped handle, 2 pieces 57T523 by GRAPHITE is a jigsaw blade with a toothing density of 12 TPI, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 5.2 mm, a thickness of 1 mm and a tooth spacing of 2 mm. Suitable for cutting softwood (2-15 mm), plywood, chipboard, carpentry plywood and fibreboard. The GRAPHITE brand blade allows both basic cutting and curved cutting.

1,10€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur astmega 5/7 mm

02-54T401

GRAPHITE's 5/7 mm 54T401 confirmat drill bit characterised by an overall length of 85 mm and a working part length of 55 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every DIY enthusiast.

4,50€

Laost otsas. Tellides tarneaeg nädalat