Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Ketashari 150 mm, punutud terastraat, M14

02-57T433

The 150 mm wire wheel brush, twisted steel wire, M14, 57T433 by GRAPHITE with a diameter of 150 mm is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 9000 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.

12,30€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus kahe spiraaliga kivipuur 14 x 310 mm

02-56T135

Kinnitus: SDS Plus
Tüüp: kahe spiraaliga kivipuur
Läbimõõt: 14 mm
Kogupikkus: 310 mm
Tööpikkus: 230 mm
Spiraal: kahekordne spiraal
Sobivad materjalid: betoon, tellis, kivi

3,30€

Laost otsas. Tellides tarneaeg nädalat

Segmenteeritud teemantlõikeketas 125 × 22,2 mm, kuivlõikuseks

02-57T307

Segmented diamond cutting disc, 125 x 22.2 mm, dry 57T307 by GRAPHITE is a segmented dry cutting disc with a diameter of 125 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.

3,50€

Laost otsas. Tellides tarneaeg nädalat

Abrasiivvõrk 115 x 280 mm, P100

02-58T153

Sanding grid 115 x 280 mm, P100 58T153 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It features double-sided grit and black silicon carbide grain. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to the double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.

0,298€

Laost otsas. Tellides tarneaeg nädalat

Puidu augusaagide komplekt 26–63 mm, lõikesügavus 50 mm, karastatud hammastega, 7 tk

02-56T752

Wood hole saws 26 - 63 mm, h 50 mm, hardened teeth, set of 7 pieces 56T752 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 50 mm and the maximum drilling depth is 42 mm. The maximum speed is 1500 rpm. The product is fitted with hardened teeth and is designed for drilling in wood, plasterboard and plastic.

4,50€

Laost otsas. Tellides tarneaeg nädalat

Lihvlint 75 x 533 mm, P40, 3 tk

02-58T366

Endless belts 75 x 533 mm, P40, 3 pcs. 58T366 by GRAPHITE are designed for machine use and work with belt sanders. They have a backing made of paper and an electrocorundum coating. GRAPHITE belts are suitable for metal, wood, plastic and plasterboard. They will prove their worth in many tasks.

2,90€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur, pikk 10 x 400 mm

02-54T558

GRAPHITE's Wood Drill, Extended 10 x 400 mm 54T558 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 10 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.

3,10€

Laost otsas. Tellides tarneaeg nädalat

Pööratavate otsikute komplekt SL6, PH1×2, PH2×3, PZ1/2/3, magnetilise otsikuhoidikuga 60 mm, 10 tk

02-56T513

Komplekti kuuluvad:

SL: SL6 (50 mm)
PH: PH1 (65 mm), PH2 (65 mm), PH1 (100 mm), PH2 (100 mm), PH2 (110 mm)
PZ: PZ1, PZ2, PZ3 (65 mm)
60 mm magnetiline otsikuhoidik

4,70€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus kahe spiraaliga kivipuur 10 × 260 mm

02-56T117

Kinnitus: SDS Plus
Tüüp: kahe spiraaliga kivipuur
Läbimõõt: 10 mm
Kogupikkus: 260 mm
Tööpikkus: 186 mm
Spiraal: kahekordne spiraal
Sobivad materjalid: betoon, tellis, kivi

2,19€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur, pikk 20 x 400 mm

02-54T563

The Wood Drill, Extended 20 x 400 mm 54T563 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 20 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 800 rpm. It will work well for many DIY tasks.

10,21€

Laost otsas. Tellides tarneaeg nädalat

Volframkarbiid-augusaag 67 mm

02-56T741

GRAPHITE's 67mm 56T741 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

7,20€

Laost otsas. Tellides tarneaeg nädalat

Metallipuuride komplekt HSS 4–10 mm, 5 tk

02-54T910

HSS metal drill bits, 4 - 10 mm, set of 5 pieces, 54T910 by GRAPHITE are metal drill bits characterised by diameters of 4, 5, 6, 8, 10 mm. They are made of HSS high speed steel. They have a cylindrical chuck and a 118° drill sharpening angle. They are characterised by compliance with DIN 338 and are suitable for every DIY enthusiast.

6,00€

Laost otsas. Tellides tarneaeg nädalat

Bimetall-augusaagide komplekt 19–76 mm, 15 tk

02-56T724

Hole saws with adapter, 19-76 mm, set of 15 pieces 56T724 by GRAPHITE contains fifteen pieces. The set includes holesaws with diameters: 19 mm, 22 mm, 25 mm, 29 mm, 32 mm, 35 mm, 38 mm, 44 mm, 51 mm, 57 mm, 64 mm, 76 mm. Included - 2 adapters with a 6 mm pilot drill bit and an allen key for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.

18,40€

Laost otsas. Tellides tarneaeg nädalat

Harjavaba akunurklihvija Energy+ 18 V, 125 mm, 0-9200 p/min, ilma akuta

02-58GE142

18 V harjavaba akunurklihvija (58GE142) on võimas ja mitmekülgne tööriist lõikamis-, lihvimis- ning puhastustöödeks. Seade kuulub GRAPHITE ENERGY+ akusüsteemi ja töötab 18 V liitiumioonakudega.

Akunurklihvija on varustatud vastupidava harjavaba mootoriga, mis tagab suure jõudluse, pikema kasutusea ning väiksema hooldusvajaduse. Seadmel on kolmeastmeline kiiruse reguleerimine, mis võimaldab valida töö jaoks sobiva pöörlemiskiiruse.

Maksimaalne pöörlemiskiirus on 9200 p/min, kiiruseseaded:

0–3500 p/min

0–6500 p/min

0–9200 p/min

125 mm kettale mõeldud nurklihvija on varustatud M14 spindlikeermega, mis võimaldab kasutada laialdaselt levinud lõike- ja lihvkettaid.

Ergonoomiline korpus, lisakäepide ning lüliti lukustusfunktsioon tagavad mugava ja turvalise kasutamise ka pikemate tööde korral.

Tehnilised andmed:

Toitepinge: 18 V (ENERGY+ akusüsteem)
Mootor: harjavaba
Ketta läbimõõt: 125 mm
Pöörete arv:

0–3500 p/min

0–6500 p/min

0–9200 p/min

Maksimaalne pöörlemiskiirus: 9200 p/min
Spindlikeere: M14

Omadused ja eelised:

Harjavaba mootor suure töökindluse ja kasutusea tagamiseks
Kolmeastmeline kiiruse reguleerimine
Sobib lõikamis-, lihvimis- ja puhastustöödeks
Ergonoomiline disain mugavaks käsitsemiseks
Lisakäepide paremaks kontrolliks
Lüliti lukustusfunktsioon mugavamaks tööks
Ühilduv GRAPHITE ENERGY+ akusüsteemiga
Sobib nii professionaalseks kui ka harrastuskasutuseks

Kasutusvaldkonnad:

Metalli lõikamine
Keevisõmbluste lihvimine
Rooste eemaldamine
Pindade puhastamine ja viimistlemine
Ehitus- ja remonditööd

Komplekti kuulub:

GRAPHITE ENERGY+ harjavaba akunurklihvija 58GE142
Lisakäepide

Märkus: Aku, laadija ja lõike- või lihvketas ei kuulu komplekti ning tuleb soetada eraldi.

74,90€

Laost otsas. Tellides tarneaeg nädalat

Puidupuur, pikk 10 x 250 mm

02-54T567

GRAPHITE's Wood Drill, Extended 10 x 250 mm 54T567 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 10 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.

2,10€

Laost otsas. Tellides tarneaeg nädalat

Segmenteeritud teemantlõikeketas 180 × 25,4 mm, kuivlõikuseks

02-57T312

Segmented diamond cutting wheel, 180 x 25.4 mm, dry 57T312 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.

7,20€

Laost otsas. Tellides tarneaeg nädalat

Teemant-augusaag 6 mm

02-56T726

The 6mm 56T726 diamond hole saw by GRAPHITE has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

3,60€

Laost otsas. Tellides tarneaeg nädalat

Teemant-augusaag 35 mm

02-56T735

GRAPHITE's 35mm 56T735 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.

12,90€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvkettad 150 mm, P36, 5 tk, ilma aukudeta

02-58T170

Velcro sanding discs 150 mm, P36, 5 pieces, unperforated 58T170 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P36 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.

1,80€

Laost otsas. Tellides tarneaeg nädalat

Lihvpaber rullis kollane 2,5 m x 115 mm, P60

02-58T421

Yellow sanding paper in roll 2.5 m x 115 mm, P60, 58T421 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both manual and machine sanding - including with orbital sanders and gypsum sanding trowels.

1,80€

Laost otsas. Tellides tarneaeg nädalat