Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Nurgasaag 1800 W, saeketas 254 mm, 60 hammast (TCT), 4800 p/min

02-59G812

Professionaalne liuglõikefunktsiooniga nurgasaag, mis sobib suurte puidu- ja puitmaterjalide täpseks lõikamiseks. Võimas 1800 W mootor, täpne lasersihtimine ning võimalus teha nii kald- kui ka nurglõikeid muudavad tööriista suurepäraseks valikuks puuseppadele, ehitajatele ja paigaldajatele.

Tehnilised andmed:

Võimsus: 1800 W
Saeketta läbimõõt: 254 mm
Hammaste arv: 60 (TCT kõvasulamhammastega)
Pöörlemiskiirus: 4800 p/min
Kaldlõike nurk: 0° kuni 45°
Nurglõike nurk: 0° kuni 45°
Toitejuhtme pikkus: 3 m

Omadused:

Liuglõikefunktsioon suuremate toorikute töötlemiseks.
Kiire reguleerimine levinumatele lõikenurkadele.
Integreeritud laser tagab täpse lõikejoone ja materjali positsioneerimise.
Tugev ja kompaktne alumiiniumisulamist konstruktsioon.
Metallist spindlilukk saeketta lihtsaks vahetamiseks.
Libisemiskindla kattega käepide tagab kindla ja mugava haarde.
Süsiharjade vahetamine väljastpoolt ilma tööriista lahti võtmata.
Vastupidav kummikattega toitejuhe professionaalseks kasutamiseks sise- ja välistingimustes.

Komplekti kuulub:

Tolmukott
Vertikaalne materjaliklamber
Hooldusvõti

245,30€

Laost otsas. Tellides tarneaeg nädalat

Soldering tips for transformer soldering iron 44E005, 3 pcs

01-44E004

Tips for soldering gun 44E005 - 3 pcs

3,10€

Laost otsas. Tellides tarneaeg nädalat

Tile cutting machine 1500W, 250 x 25 mm, cutting range 1200 mm

02-59G892

Tile cutter 1500 W, 250 x 25 mm, 1200 mm cutting range, 3 m cable 59G892 by GRAPHITE is a specialist machine with 1500 W of power for precision cutting of tiles and stone up to 52 mm thick and 1200 mm maximum length. The tool features a bevel cutting range of 0° to 45°. It has a number of electrical safety features, including a PRCD residual current circuit breaker, as well as thermal protection for the electric motor. The cutter is equipped with a cutting head guide made of heat-resistant aluminium alloy and a table top covered with an anti-slip material to prevent uncontrolled movement of materials. The machine has a Class I protection rating and an IP54 protection level. The cutter's legs fold away for easier storage or transport. The flexible and robust power cable, in turn, is protected in a rubber sheath with a length of 3 m - it is recommended for professional and industrial applications, both indoors and outdoors. Compliance with European standards is confirmed by the CE certificate.

462,71€

Laost otsas. Tellides tarneaeg nädalat

Soldering tips for transformer soldering iron 44E002, 2 pcs

01-44E007

Tips designed for use with TOPEX soldering guns (ref. no. 44E007). Tips are packed 2 pcs per package. TOPEX brand is oriented towards DIY enthusiasts.

2,50€

Laost otsas. Tellides tarneaeg nädalat

Pipe burner 22 mm, 150 g/h, 2.1kW

01-44E131

Pipe burner heats up pipes faster, because heating is done in many points at the same time. It is perfect for workshop tasks, as well as for brazing copper installations.

9,30€

Laost otsas. Tellides tarneaeg nädalat

Microtorch 10 ml, piezo ignition, rechargable

01-44E107

Microburner 10 ml, piezo ignition 44E107 by TOPEX is a device equipped with a practical continuous operation function and a lock switch, with a capacity of 10 ml. It has a piezo ignition, which starts an electric spark. It is characterized by an operating temperature of 1300 °C. Its handle is covered with an additional material which ensures a firm grip. The microflame is perfect for precise works. Recommended for professionals and DIY enthusiasts.

15,80€

Laost otsas. Tellides tarneaeg nädalat

Soldering kit 2kW, 1 burner

01-44E110

TOPEX brazing kit with burner power 2 kW and flame temperature 1850°C. Burner is made of brass, diameter 17 mm. With 1.5 m hose. The set is perfect for workshop tasks, as well as for soldering copper installations. TOPEX brand is oriented towards DIY enthusiasts.

29,10€

Laost otsas. Tellides tarneaeg nädalat

Tile cutting machine 1200W, disc 250 x 25.4 mm

02-59G887

GRAPHITE's 1200 Watt specialist tile cutting machine for precision cutting of tiles and stone up to 58 mm thick. Maximum length of cut material up to 1260 mm. The bevel cutting range of the cutter is from 0 to 45°. The power tool has a number of electrical safety features, including a PRCD residual current circuit breaker and thermal protection for the electric motor. The device has Class I protection class, IP45 protection level. The copper-wound induction cutting motor can generate up to 3000 head revolutions per minute. The guide of the cutting head is made of heat-resistant aluminium alloy. The top of the cutter is covered with an anti-slip material, which prevents uncontrolled movement of materials. It is possible to fold the legs for easier transport and storage. The device is equipped with a flexible and durable power cord in rubber coating with a length of 2m, also dedicated to professional and industrial applications, both indoors and outdoors. CE certification ensures compliance with European standards.

822,80€

Laost otsas. Tellides tarneaeg nädalat

Metal cut-off saw 2600W, disc 355 x 25.4 mm

02-59G873

2600W GRAPHITE metal cutting machine with 355 x 25.4mm blade for cutting workpieces up to 120mm thick. The cutter with a smooth start function, has the ability to adjust the angle of cutting in the range from 0° to 45°. The maximum rotational speed of the head is 3800 rpm. The vice of the cutter with rapid traverse of the feed screw has the possibility of increasing the range and setting the jaw for angle cutting. The automatically opening metal-made bottom guard for the cutting blade ensures user safety and allows quick access when changing the blade.

210,90€

Laost otsas. Tellides tarneaeg nädalat

Lauasaag 1600 W, saeketas 254 × 30 mm, kokkupandava lauaga

02-59G823

Saag on varustatud kokkupandava alumiiniumlauaga, mis muudab selle transportimise ja hoiustamise mugavaks. Sobib puidu ja puidupõhiste materjalide täpseks piki- ja ristlõikamiseks.

Tehnilised andmed:

Võimsus (S1): 1600 W
Maksimaalne võimsus (S6 20%): 2000 W
Saeketta mõõt: 254 × 30 mm
Pöörlemiskiirus: 4800 p/min
Kaldlõike nurk: 0° kuni 45°
Maksimaalne lõikesügavus:

90° juures: 80 mm

45° juures: 55 mm

Laua mõõdud: 560 × 670–1040 × 1000 mm
Kaal: 31 kg

Komplekti kuulub:

Alusraam
Töödeldava materjali tugi
Statiivi käepide
Lisakäepide
Kinnituspoldid
Mutrivõtmed

462,71€

Laost otsas. Tellides tarneaeg nädalat

Gas soldering lamp for 190 g cartridges with 4 gas cartridges with valve

01-44E154

Gas soldering lamp for 190 g cartridges+ 4 gas cartridges with valve 44154 by TOPEX is a set of a soldering lamp and 4 cartridges of butane gas with valve, each with a capacity of 190 g. The lamp is characterised by an operating temperature of up to a maximum of 1350°C and an output of 1.9 kW. Its average gas chewing is 180 g/h. The housing is made of durable plastic. The gas flow locking system contributes to the safe use of the entire set. The TOPEX gas soldering lamp and 4 gas cartridges with valve are recommended, among others, for soldering plumbing installations, for firing and kindling, as well as for many other applications.

35,80€

Laost otsas. Tellides tarneaeg nädalat

Circular saw 1800W, blade 210x30 mm

02-58G493

GRAPHITE circular saw with 1800W motor, capable of operating at speeds up to 5000 rpm. The device is designed to work with cutting discs with an outer diameter of 210 mm and allows you to make cuts in materials up to 73 mm thick. There is also the option of cutting at an angle of up to 45°. Angle and cutting depth adjustment is done without any tools - special graduations help in parameter settings. The safety of the operator is ensured by a two-stage switch preventing accidental operation. Comfortable and reliable guidance of the power tool is ensured by an additional handle with a wide grip surface. In the place visible to the operator, an indicator has been placed informing about connecting the power tool to the network and its readiness to work. The blade cover is made of aluminium alloy. Laser pointer integrated with the device makes it easier to determine the direction of cutting. The parallel guide provided with the tool allows for precise cutting along the edge of the material. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.

137,31€

Laost otsas. Tellides tarneaeg nädalat

Gas soldering lamp with 190 g cartridges

01-44E142

TOPEX liquid gas blow lamp for 190 g cartridges, working temperature 1350℃, power 1.9 kW. Lamp features lightweight plastic casing and can be used for workshop tasks. TOPEX brand is oriented towards DIY enthusiasts.

23,00€

Laost otsas. Tellides tarneaeg nädalat

Circular saw 1500W, blade 185x20 mm

02-58G492

GRAPHITE circular saw with 1500W motor, capable of operating at speeds up to 5800 rpm. The device is designed to work with discs with an outer diameter of 185 mm and allows you to make cuts in materials up to 65 mm thick. There is also the option of cutting at an angle of up to 45°. Angle and cutting depth adjustment is done without any tools - special graduations help in parameter settings. The safety of the operator is ensured by a two-stage switch preventing accidental operation. Comfortable and reliable guidance of the power tool is ensured by an additional handle with a wide grip surface. In the place visible to the operator, an indicator has been placed informing about connecting the power tool to the network and its readiness to work. The blade cover is made of aluminium alloy. Laser pointer integrated with the device makes it easier to determine the direction of cutting. The parallel guide provided with the tool allows for precise sawing along the edge of the material. The tool is equipped with flexible and strong power cord in rubber coating, 3 m long, also designed for professional and industrial applications for use indoors and outdoors.

104,10€

Laost otsas. Tellides tarneaeg nädalat

Järkamissaag 1800 W, saeketas 210 mm, pöörlemiskiirus 4800 p/min

02-59G806

Tehnilised andmed:

Võimsus: 1800 W
Saeketta läbimõõt: 210 mm
Pöörlemiskiirus: 4800 p/min
Kaldlõike nurk: 0° kuni 45°
Nurgalõike nurk: 0° kuni 45°
Saeketta etteande funktsioon
Integreeritud laser
Metallist võllilukk
Toitekaabli pikkus: 3 m

Komplekti kuulub:

Tolmukott
Vertikaalne materjaliklamber
Hooldusvõti

274,80€

Laost otsas. Tellides tarneaeg nädalat

Tile cutting machine 1200W, 230 x 25 mm, cutting range 1000 mm

02-59G891

Tile cutter 1200 W, 230 x 25 mm, 1000 mm cutting range, 3 m cable 59G891 by GRAPHITE is a specialist 1200 W machine for precision cutting of tiles and stone up to 43 mm thick and 1000 mm maximum length. The tool features a bevel cutting range of 0° to 45°. It has a number of electrical safety features, including a PRCD residual current circuit breaker, as well as thermal protection for the electric motor. The cutter is equipped with a cutting head guide made of heat-resistant aluminium alloy and a table top covered with an anti-slip material to prevent uncontrolled movement of materials. The machine has a Class I protection rating and an IP54 protection level. The cutter's legs fold away for easier storage or transport. The flexible and robust power cable, in turn, is protected in a rubber sheath with a length of 3 m - it is recommended for professional and industrial applications, both indoors and outdoors. Compliance with European standards is confirmed by the CE certificate.

405,19€

Laost otsas. Tellides tarneaeg nädalat

Plunge saw 1200W, disc 165mm

02-58G495

GRAPHITE plunge saw 1200 W is a precision device used for making cuts in materials such as wood, laminate or aluminum. The design of the saw-plunge cutter allows you to make plunge cuts anywhere in the material - without the need to start cutting from the edge, as is the case with traditional circular saws. The device works with cutting discs with a diameter of 165 mm and enables operation at a regulated speed in the range of 2200-5200 rpm. For better precision when making longer formatting cuts, it is recommended to use a guide rail, which is also included in the GRAPHITE offer. The maximum cutting thickness without a guide rail is 57 mm, while the slat is 52 mm. The device is equipped with a depth stop with a precise graduation and indicator, which allows you to easily choose the depth when working with or without the skirting board. The sawing-cutting deck is equipped with a slack adjustment system in relation to the guide rail and enables adjustment of the cutting angle in the range of 0-47 °. The blade guard is made of aluminum, and the entire side of the device has been profiled in such a way as to minimize the distance between the disk and the outer edge of the housing. This means that the minimum distance of the cutting line from an obstacle, eg in the form of a wall, is only 11.5 mm. The device is equipped with rotary chip discharge with the option of connecting a vacuum cleaner. The tool is equipped with flexible and strong power cord in rubber coating, 2 m long, also designed for professional and industrial applications for use indoors and outdoors.

166,20€

Laost otsas. Tellides tarneaeg nädalat

EasyMoka 18V-2 Inox SOLO Aku kohvimasin

48-R06039E4100

83,34€ 108,34€

Laost otsas. Tellides tarneaeg nädalat

Ekstsentriklihvija 350 W, 150 mm

03-04721

NEO TOOLS 350 W ekstsentriklihvija on varustatud 150 mm lihvtalla, 5 mm ekstsentriku käigu ja 6-astmelise kiiruse reguleerimisega.

Pöörlemiskiirust saab seadistada vahemikus 4000–10 000 p/min, mis tagab ühtlase ja kvaliteetse lihvimistulemuse.

Komplekti kuulub 6 erineva karedusega lihvpaberit.

Komplekti sisu:

Ekstsentriklihvija
Lihvpaberid:

P80, P100, P120, P150, P180, P240

180,10€

Laost otsas. Tellides tarneaeg nädalat

Kettakaitse

48-T2608000880

26,55€ 34,51€

Laost otsas. Tellides tarneaeg nädalat