Elektri- ja akutööriistad, tööpingid

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Cordless screwdriver 4V, Li-Ion, USB-C

03-04199

The 4 V, 04-199 cordless screwdriver by NEO TOOLS is a handy device that will be indispensable in the profession of an electrician, locksmith, but also in the tasks of a do-it-yourselfer or mechanic. The tool is characterised by a voltage of 4 volts and a battery capacity of 1,500 mAh. Charged via a USB C connection (no charger available), it offers up to 55 minutes of operation on a full battery. Thanks to its HEX ¼" work chuck size, it is compatible with many accessories. The set offers 25 mm screwdriver bits (25 pieces: SL3, SL4, SL5, SL6, PZ1, PZ2, PZ3, T10, T15, T20, T25, T30, PH1, PH2, PH3, H2, H3, H4, H5, H6), 60 mm adapter and charging cable. The NEO TOOLS cordless screwdriver has a practical spindle lock. When the rotation is set to the correct direction (L/P) and the screwdriver is pressed against the screw, it is automatically activated thanks to the auto start/stop function. The speed of the unit is 230 min-1 and its torque depends on the gear - I - 2 Nm, II - 3 Nm and III - 4.5 Nm. LED lighting and a charge indicator contribute to the comfort of using the NEO TOOLS brand screwdriver. It is a tool that lies well in the hand and is characterised by high precision of rotation.

37,30€

Tellimisel

Cordless satin finishing machine Energy+ 18V, Li-Ion, without battery

02-58GE137

The Energy+ 18 volt cordless satin polisher 58GE137 by GRAPHITE is part of the Energy+ cordless system. A multifunctional polisher operating at 18 volts. It features a no-load speed of 1500 - 3300 rpm and variable speed control. It has a disc size of 100 x 80 mm. Equipped with a brushless, robust motor. The satin-finisher with auxiliary handle and soft grip for comfortable use. Provides simple operation with tool-free accessory change. Its idling time depends on the battery used: 2 Ah - 15 minutes of use, 4 Ah - 31 minutes or 6 Ah - 51 minutes. The machine can be used to remove tarnish, scratches, unnecessary material, correct surface defects, brush clean, satin or texture surfaces. Depending on the roller used, it is possible to achieve a different treatment effect - including high gloss. The GRAPHITE satin roller is recommended for professionals and DIY enthusiasts. Offered in a set with sandpaper and roller.

128,60€

Tellimisel

Impact wrench 18V, 850 Nm, brushless, 1/2", Energy+, without battery

03-04608

The E+ 850 Nm brushless impact spanner 04-608 by NEO TOOLS is a multi-purpose workshop tool, featuring 3 gears and a maximum torque of 850 Nm. Equipped with the popular ½" tool chuck, it is compatible with many accessories. The NEO TOOLS spanner functions on the basis of the modern Energy+ rechargeable system and 18 V lithium-ion batteries. Its working time depends on the battery used and ranges from 32 minutes (2 Ah battery) to up to 122 minutes (8 Ah battery). The NEO TOOLS impact spanner is equipped with a brushless motor. It is characterised by a torque (in gears I/II/III) of 270/360/510 Nm, with a maximum torque of 850 Nm. The impact frequencies are (gear I/II/III) 1500/2000/3000 BPM, while the maximum speed is (gear I/II/III) 1200/1600/2400 min-1. In addition to the speed control, the power tool also has an LED light, a practical belt clip and a rubberised handle. With a gear housing made of reinforced aluminium and a main housing made of glass fibre reinforced nylon - this is a robust spanner that will last for many months of use.

191,00€

Tellimisel

Brushless impact wrench 1100 Nm, Energy+ 18V, without battery

03-04618

The 1/2" 1100 Nm 18 V Energy+ brushless impact spanner 04-618 by NEO is a device that functions with the Energy+ battery system. Equipped with a 1/2" attachment and a maximum screw loosening torque of 1100 Nm. It reaches 560 Nm in 1st gear, 680 Nm in 2nd gear and 1100Nm in 2nd gear. It has the ability to operate at left-hand speeds. It is characterised by speeds of 1000 rpm (1st gear), 1200 rpm (2nd gear) and 1800 rpm (3rd gear). The impact frequency corresponds to 0-1250/1500/2250 bpm. The spanner is equipped with a robust brushless motor. The recommended battery capacity is 6 Ah and allows 63 minutes of idling (for a 4 Ah battery it is 42 minutes). The NEO-branded tool is recommended for mechanics, automotive enthusiasts, roofers, DIY enthusiasts and for home use.

231,40€

Tellimisel

Cordless screwdriver USB-C 3.6V, Li-Ion, plastic box+accessories

03-04200

NEO multifunctional cordless screwdriver with micro-USB connector with a set of screwdriver bits is designed for many jobs depending on the use of the appropriate socket. The set comes in a plastic box for easy storage.

43,40€

Tellimisel

Impact wrench 18V, 350 Nm, brushless, 1/2", compact, Energy+, without battery

03-04613

The 350 Nm 1/2'' compact Energy+ brushless spanner 04-613 by NEO TOOLS is a device that functions on the basis of the Energy+ battery system. It features a brushless motor with a maximum unscrewing torque of 350 Nm and a 1/2" mounting. It features three gears and a wide speed range ((gear I / II / III) 0-1,500 / 0-2,000 / 0-2500 min-1), impact frequencies (0-1850/0-2500/0-3200 BPM) and torques (gear I/II/III) 80/200/320 Nm, max. 350Nm. The NEO TOOLS compact brushless spanner also has an LED light and a practical belt attachment. It will prove useful in many situations and places with difficult access.

86,40€

Tellimisel

Cordess ratchet wrench Energy+ 18V, Li-lon, 3/8”, whithout battery adapter 1/2"

03-04603

The Energy+ 18V, Li-lon, 3/8" cordless ratchet, without battery, 1/2" adapter 04-603 by NEO is a tool designed for DIY mechanics to work in tight spaces such as engine compartments or car chassis. The ratchet is compatible with the Energy+ rechargeable system and GRAPHITE 18V lithium-ion batteries. Recommended battery capacities are 4 or 6 Ah. The unit achieves a torque of 60 Nm and a no-load speed of 250 revolutions per minute. The 3/8" square-shaped ratchet head is designed to work with M5 - M10 screws. The tool also features an LED light and soft grip handle. A 1/2" universal adapter is included in the set. This is a practical tool from the NEO brand for professionals and DIY enthusiasts.

89,30€

Tellimisel

Akuhaamer 18V NH18DSLW4Z kere

42-NH18DSLW4Z-KERE

kompaktne 18 V akuhaamer, mis on mõeldud naelte sisse löömiseks kitsastes ja raskesti ligipääsetavates kohtades. Tegemist on automaatse löögimehhanismiga tööriistaga, kus naela vastu surumisel hakkab tööriist ise lööma.

Põhiandmed:

Toitepinge: 18 V aku (ei kuulu komplekti)
Löögisagedus: kuni 4000 lööki/min
Naelte pikkus: 25–90 mm
Naela pea läbimõõt: 4,4–8,7 mm
Kaal: ca 0,9–1,3 kg
Mõõdud: u 285 × 135 × 93 mm

Omadused:

Automaatne löögifunktsioon – lihtne ja kiire naelte löömine
Väga kompaktne pea – sobib kitsastesse kohtadesse
Madal raskuskese – mugav töö seinte lähedal
LED-valgustus tööala valgustamiseks
Magnetots naela hoidmiseks

123,94€ 158,89€

Tellimisel

Akunaelapüstol 34° 18V NT1865DAA kere + HSC kohver 32 - 65 mm

42-NT1865DAAW9Z

Tehnilised andmed:

Toitepinge: 18 V
Naela tüüp: 15G viimistlusnael, 34°
Naela läbimõõt: 1,8 mm
Naela pikkus: 32–65 mm
Salve maht: 100 naela
Laskekiirus: kuni 3 naela sekundis
Töörežiimid: järjestikune / kontaktkäivitus
Kaal ilma akuta: 2,7 kg
Mõõdud: 298 × 140 × 354 mm

Omadused:

Harjavaba mootor suure jõudluse ja pika tööea jaoks
Air Spring Drive süsteem – ei vaja gaasi ega kompressorit
Sobib 34° viimistlusnaeltele (15G / 1,8 mm)
Naelte pikkus 32–65 mm
Valitavad järjestikune ja kontaktkäivitus
Kiire sügavuse reguleerimine ilma tööriistadeta
Sisseehitatud LED-töövalgusti
Tühilöögi kaitse
Kuni 100 naela mahutav salv
Tarnitakse HSC transpordikohvris, aku ja laadija ei kuulu komplekti

477,36€ 612,00€

Tellimisel

Painutuspink RBM 305

51-3780112

RBM 305 on kompaktne käsitsi juhitav 3-rulliga valtspink, mis sobib torude, silindrite ja teiste ümarate detailide valmistamiseks õhukesest lehtmetallist. Tänu tugevale konstruktsioonile, terasrullidele ja käigukastiga käsiajamile tagab seade täpse ning sujuva töö nii töökojas kui ka piiratud ruumiga paigaldusobjektidel.

Asümmeetriline rullide paigutus võimaldab mugavat eelvaltsimist ning kallutatav külgrull lihtsustab kooniliste detailide valmistamist. Väljaulatuv ülemine rull võimaldab valmis detaili kiiresti eemaldada. Lisaks on külg- ja surverull varustatud traadisoontega, mis võimaldavad töödelda erineva läbimõõduga traate.

Omadused:

3-rulliga käsitsi juhitav valtspink
Tugevad terasrullid
Asümmeetriline rullide paigutus lihtsaks eelvaltsimiseks
Kallutatav külgrull kooniliste detailide valmistamiseks
Väljatõmmatav ülemine rull valmis detaili hõlpsaks eemaldamiseks
Käsivänt ja reduktoriga jõuülekanne
Traadisooned läbimõõtudele 4 / 6 / 8 mm
Kompaktne ja kerge konstruktsioon
Sobib torude, silindrite ja muude ümarvormide valmistamiseks

Tehnilised andmed:

Maksimaalne töölaius: 305 mm
Maksimaalne eelvaltsimise võime terases (400 N/mm²): 0,8 mm
Minimaalne painutusdiameeter: 40 mm
Ülemise rulli läbimõõt: 25 mm
Traadisooned: 4 / 6 / 8 mm
Mõõtmed (P × L × K): 580 × 210 × 255 mm
Kaal: ca 14 kg

172,80€ 192,00€

Tellimisel

Painutuspink HSBM 305 HS

51-3772305

HSBM 305 HS on kompaktne ja vastupidav käsitsi juhitav painutuspink, mis sobib ideaalselt plekitöödeks töökodades, hooldusettevõtetes ning hobikasutajatele. Lihtne konstruktsioon koos tugevast terasest raamiga tagab täpse töö ja pika kasutusea. Segmenteeritud ülemine tala võimaldab valmistada keerukamaid profiile, karpe ja servapainutusi.

Tänu ekstsentrikmehhanismiga kiirele seadistusele ning kuni 135° painutusnurgale on masinat mugav kasutada erinevate lehtmetallitööde tegemisel. Kompaktsed mõõtmed ja suhteliselt väike kaal muudavad seadme hõlpsasti teisaldatavaks.

Omadused:

Tugev ja töökindel käsitsi juhitav painutuspink
Segmenteeritud ülemine tala keerukamate profiilide valmistamiseks
Kiire ja kasutajasõbralik reguleerimine ekstsentrikmehhanismi abil
Sobib kastide, profiilide ja servapainutuste tegemiseks
Maksimaalne painutusnurk 135°
Kvaliteetne Euroopa tootmine
Lihtne transportida ja paigaldada

Tehnilised andmed:

Maksimaalne töölaius: 305 mm
Painutusvõime (400 N/mm²): 1,0 mm
Maksimaalne painutusnurk: 135°
Segmentide jaotus: 25 / 50 / 50 / 75 / 100 mm
Mõõtmed (P × L × K): 500 × 350 × 410 mm
Kaal: ca 30 kg

258,30€ 287,00€

Tellimisel

Kettakaitse

48-T2608000880

26,55€ 34,51€

Tellimisel

Elektri- ja akutööriistad, tööpingid

Elektrilised käsitööriistad

Akutööriistad

Puidutööpingid

Metallitööpingid

Keevitusseadmed

Tarvikud elektritööriistadele ja tööpinkidele

Generaatorid