Elektri- ja akutööriistad, tööpingid

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Industrial engine
• Easy to use safety switch according to IP 54
• Digital drilling depth and speed indicator integrated in the housing
• Separate emergency stop impact switch
• Precision Spindle bore
• Safety electronics in 24 V DC
• Guaranteed concentricity measured less than 0.02 mm in the drill quill
• Drill spindle with precision ball bearings
• High quality keyless chuck
• Digital depth gauge
• Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
• V-belt cover with safety switch
• One piece cast aluminum die-cast quill lever with softgrip handles
• Large, height-adjustable protective screen with safety switch
• Heavy version of the entire machine

From D 23 Pro

• GATES quality strap

From D 23 Pro / 400 V

• Forward / reverse operation

D 33Pro

• Massive, large base plate with T-slots, strongly ribbed on the back

• Quiet running
• Heavy casting
• High cutting accuracy due to vibration-free running
• Ball-bearing saw band guide
• Chip brush
• Microswitch for automatic limit switch
• Pushbutton - Manual saw band - on the hand lever switches the saw blade running on and off
• As standard with high-quality bi-metal saw band
• Material stop with scaling
• Quick release vice adjustable via Handwheel. Clamping the workpiece with a handy quick-release lever
• Stable machine base
• Adjustable limit stops
• Double miter
• With gear transmission

MKS 275 N on professionaalne manuaalne metalliketassaag terase lõikamiseks. Kahe lõikekiiruse, 45° pööratava saepea, jahutussüsteemi ja kiirkinnituskruustangidega masin tagab täpse, kiire ja ohutu töö. 

Tehnilised andmed:

• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,1 / 1,5 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta läbimõõt: 275 mm
• Lõikenurk: -45° kuni +45°
• Saepea pööratav mõlemale poole kuni 45°
• Kiirkinnituskruustangid pööratavad mõlemale poole kuni 45°
• Kahekordse kinnitusega kruustangid täpseks lõikamiseks
• Õlivannis töötav vaikne reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 830 × 900 × 1025 mm
• Netokaal: 98 kg
• Brutokaal: 98 kg

Lõikevõime:

• Ümartäismaterjal 0°: 45 mm
• Ümartoru 0°: 80 mm
• Nelikanttoru 0°: 0 × 80 mm
• Ristküliktoru 0°: 70 × 100 mm
• Ümartäismaterjal -45°: 40 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 80 mm
• Ümartäismaterjal +45°: 40 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 80 mm 

Komplekti sisu:

• Metallketassaag Metallkraft MKS 275 N
• Jahutusseade filtriga -Pikkusepiirik 500 mm
• Kasutustööriistad

• Industrial engine
• Easy to use safety switch according to IP 54
• Digital drilling depth and speed indicator integrated in the housing
• Separate emergency stop impact switch
• Precision Spindle bore
• Safety electronics in 24 V DC
• Guaranteed concentricity measured less than 0.02 mm in the drill quill
• Drill spindle with precision ball bearings
• High quality keyless chuck
• Digital depth gauge
• Precision machined, stable drill table with diagonal T-slots and circumferential cooling water channel
• V-belt cover with safety switch
• One piece cast aluminum die-cast quill lever with softgrip handles
• Large, height-adjustable protective screen with safety switch
• Heavy version of the entire machine

From D 23 Pro

• GATES quality strap

From D 23 Pro / 400 V

• Forward / reverse operation

D 33Pro

• Massive, large base plate with T-slots, strongly ribbed on the back

MKS 315 V Special Offer Set on professionaalne vertikaalne metalliketassaag täpseks metallitöötlemiseks. Kahe lõikekiiruse, kuni 60° pöördenurga ja jahutussüsteemiga seade sobib terase, torude ning profiilmaterjalide lõikamiseks.

Tehnilised andmed:

• Tüüp: manuaalne vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori võimsus: 1,3 / 1,9 kW
• Saeketta läbimõõt: 315 mm
• Lõikekiirused: 17 / 34 p/min
• Lõikenurk: -45° kuni +60°
• Vertikaalselt juhitud saepea reguleeritava kiillati ja pääsusaba-juhikuga
• Reguleeritav sügavuspiirik saepea vertikaalse käigu jaoks
• Ristisuunas liigutatav kruustang koos kraadivastase seadmega
• Jahutuspump koos jahutusvedeliku filtriga
• Jahutusvedeliku suunaja saeketta määrimiseks
• Laastumurdja saeketta puhastamiseks
• Õlivannis töötav reduktor
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1500 × 650 × 1700 mm
• Netokaal: 270 kg
• Sobib eriti hästi roostevaba terase töötlemiseks tänu madalatele lõikekiirustele

Lõikevõime:

• Ümartäismaterjal 0°: 70 mm
• Ümartoru 0°: 100 mm
• Nelikanttoru 0°: 90 × 90 mm
• Ristküliktoru 0°: 135 × 80 mm
• Ümartäismaterjal -45°: 70 mm
• Ümartoru -45°: 100 mm
• Nelikanttoru -45°: 90 × 90 mm
• Ristküliktoru -45°: 100 × 80 mm
• Ümartäismaterjal +45°: 70 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 70 × 80 mm

Komplekti sisu:

• Metallkraft MKS 315 V vertikaalne metalliketassaag
• Jahutusseade koos filtriga
• Materjalitugi rullikuga
• Pikkusepiirik 500 mm
• Kasutustööriistad
• Laastueemaldi
• Eripakkumise komplekti kuuluvad lisatarvikud

• High concentricity due to hardened and ground main spindle
• Low-maintenance gearbox with grease lubrication
• Gearbox with PA6 gears
• Large speed range
• Heavy, solid cast construction
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Drilling depth stop adjustable with millimeter scale
• Forward / reverse operation
• Machine light integrated in the drill head
• Integrated expeller for easy tool change
• Precision machined drilling table with diagonal T-slots with all-round cooling water channel
• Thick-walled cast-iron column for high power absorption and stability
• Massive base plate, large dimensions and strongly ribbed on the back

MKS 315 R on professionaalne metalliketassaag kahe lõikekiiruse, 45° pööratava saepea ja nihutatava kruustangiga. Sobib täpseteks nurk-, piki- ja pilulõigeteks terases ning profiilmaterjalides. 

Tehnilised andmed:

• Toitepinge: 400 V
• Mootori võimsus: 1,5 / 2,2 kW
• Lõikekiirused: 40 / 80 p/min
• Saeketta mõõt: 315 × 2,5 × 32 mm
• Saepea pööratav 45° vasakule ja 45° paremale
• Kiirkinnituskruustangid pööratavad 45° vasakule ja paremale
• Pikisuunas nihutatav kruustang piki- ja pilulõigete tegemiseks
• Reguleeritava hõõrdsiduriga süsteem saeketta purunemise vältimiseks
• Õlivannis töötav reduktor
• Automaatne membraanpump jahutusvedelikule
• Standardne jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Pealüliti
• Kiirusevalik
• Ülekoormuskaitse
• Mõõdud (P × L × K): 1475 × 1000 × 1150 mm
• Netokaal: 170 kg
• Brutokaal: 193 kg

Lõikevõime:

• Ümartäismaterjal 0°: 65 mm
• Ümartoru 0°: 90 mm
• Nelikanttoru 0°: 5 × 85 mm
• Ristküliktoru 0°: 120 × 70 mm
• Ümartäismaterjal -45°: 60 mm
• Ümartoru -45°: 80 mm
• Nelikanttoru -45°: 70 × 70 mm
• Ristküliktoru -45°: 70 × 70 mm
• Ümartäismaterjal +45°: 60 mm
• Ümartoru +45°: 80 mm
• Nelikanttoru +45°: 70 × 70 mm
• Ristküliktoru +45°: 80 × 70 mm

Komplekti sisu:

• Metallketassaag Metallkraft MKS 315 R
• Jahutussüsteem koos filriga
• Kasutustööriistad 

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

FSM 2550 Storage Equipment täppistasapinnalihvpink NC-juhitava vertikaalsöötmega. Magnetlaud 500 × 250 mm, automaatne etteandekontroll AD5, spindli täpsus 2 μm ja tugev malmkonstruktsioon professionaalseks metallitöötluseks.

Tehnilised andmed:

• Magnetlaua mõõdud: 500 × 250 mm
• Lihvketta mõõdud: Ø 180 × 13 × 31,75 mm
• Spindli kiirus: 2900 p/min
• Spindlimootori võimsus: 1,5 kW
• Toide: 400 V / 50 Hz
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Mõõtmed (P × L × K): 2340 × 1500 × 1800 mm
• Netokaal: 1385 kg
• Transpordikaal: 1550 kg
• Spindli jooksutäpsus: 2 μm
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtimine: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 2550 Storage Equipment
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

Omadused:

• NC-juhitav vertikaalsööde
• Automaatne etteandekontroll AD5
• Programmeeritavad lihvimistsüklid
• Elektromagnetiline magnetlaud automaatse demagnetiseerimisega
• Karastatud ja pingevabastatud malmkorpus
• Turcite-B kattega käsitsi kraabitud V-tüüpi juhikud
• Automaatne keskmäärimine kõikidele juhikutele ja spindlitele
• Kuni 0,001 mm etteandesamm täppislihvimiseks
• Täppisrull-laagritega spindel jooksutäpsusega 2 μm

• Saw head swivelby by 45° to the left and right
• Stable and robust construction
• Precise cut
• Turntable and saw shaft mounted on bearings
• Quick-release screw sticks with plastic-equipped aluminium clamping jaws
• Easy and hassle-free operation
• Saw head for chiverge cut by 45° to the left tiltable
• Two hand-held screw sticks

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• High quality knife
• Angle adjustable side stop with millimeter scale
• Highest possible safety thanks to hold-down, which protects the fingers at the same time
• 500 mm backgauge

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• For metal sheets up to 1.2 mm and continuous webs up to a width of 1020 mm
• Ideal for the craftsman on the road
• Collapsible base
• Stable and robust construction

• Ideal for the artisan on the move
• stable and robust construction
• small dimensions due to collapsible base
• easy to transport
• for metal sheets up to 1.2 mm and endless sheets up to a width of 1020 mm
• the standard hold-down ensures good cutting results
• optimal price-performance ratio
• Quality Made in Europe