Elektri- ja akutööriistad, tööpingid

Tehnilised andmed:

• Magnetlaua mõõdud: 1000 × 500 mm
• Maksimaalne töödeldava detaili kaal: 800 kg
• Maksimaalne kaugus spindli ja laua vahel: 600 mm
• X-telje käik: 1150 mm
• Z-telje käik: 560 mm
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Lihvketta mõõdud: Ø 405 × 50 × 127 mm
• Spindli kiirus: 1450 p/min
• Peamootori võimsus: 7,46 kW
• Hüdraulikapumba võimsus: 2,24 kW
• Toide: 400 V / 50 Hz
• Mõõtmed (P × L × K): 4600 × 2300 × 2040 mm
• Netokaal: 6000 kg
• Transpordikaal: 6800 kg
• Spindli jooksutäpsus: 2 μm
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtsüsteem: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 50100
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Tasakaalustusvarras
• Lihvketas
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

Omadused:

• NC-juhitav vertikaalsööde suure täpsuse saavutamiseks
• Automaatne etteandekontroll AD5
• Programmeeritavad lihvimistsüklid
• Tugev pingevabastatud ja karastatud malmkonstruktsioon
• Turcite-B kattega V-tüüpi juhikud sujuvaks liikumiseks
• Elektromagnetiline magnetlaud automaatse demagnetiseerimisega
• Automaatne keskmäärimine kõikidele juhikutele ja spindlitele
• Täppisspindel koonusrull-laagritega
• Spindli jooksutäpsus kuni 2 μm
• Sobib suurte ja raskete detailide täppislihvimiseks

MTBS 1540-40 T NC-juhitav giljotiin pneumaatilise lehetoestuse ja digitaalse tagapiirikuga. Töölaius 1540 mm, lõikevõime kuni 4 mm terasel, esi- ja tagasuunaline väljastus ning 6,8 kW võimsus professionaalseks metallitööks.

Tehnilised andmed:

• Töölaius: 1540 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
• Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
• Lõigete arv minutis: 40
• Lõikenurk: 2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiiriku kiirus: 28 mm/s
• Tagapiiriku mootor: 0,37 kW
• Lõikevahe reguleerimine: 0,05–0,4 mm
• Mootori koguvõimsus: 6,8 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 12 l
• Töölaua mõõdud (P × S): 1718 × 530 mm
• Mõõtmed (P × L × K): 2320 × 2360 × 1280 mm
• Netokaal: 2240 kg

Komplekti sisu:

• MTBS 1540-40 T giljotiin
• NC-juhitav tagapiirik digitaalse mõõdunäiduga (Maper HT071)
• Pneumaatiline lehetoestus
• Esi- ja tagasuunalise väljastusega materjali suunamissüsteem
• 1000 mm külgpiirik T-soone ja mõõteskaalaga
• Kaks 500 mm lehetoestust T-soontega
• LED-lõikeala valgustus
• Roostevabast terasest töölauakate koos ülekandekuulidega
• Jalapedaaliga mobiilne juhtkonsool koos hädaseiskamisnupuga
• Pidev sõrmekaitsesüsteem
• Kvaliteetsed lõiketerad roostevaba terase lõikamiseks

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Stop track with length stop, manual measuring system with mm scale and reading magnifier
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• Maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• For precision surface grinding in the industrial sector
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

FSM 2045 on kompaktne ja täpne tasapinnalihvpink professionaalseks metallitöötluseks. NC-juhitav vertikaalsööde, elektromagnetiline magnetlaud ning automaatne etteandekontroll tagavad kvaliteetse pinnaviimistluse ja suure töötlemistäpsuse tööriistade, vormide ning täppiskomponentide valmistamisel.

Tehnilised andmed:

• Magnetlaua mõõdud: 450 × 200 mm
• Maksimaalne töödeldava detaili kaal: 150 kg
• Lihvketta mõõdud: Ø 180 × 13 × 31,75 mm
• Spindli kiirus: 2900 p/min
• Spindlimootori võimsus: 1,5 kW
• Toide: 400 V / 50 Hz
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Mõõtmed (P × L × K): 2080 × 1200 × 1800 mm
• Netokaal: 950 kg
• Spindli jooksutäpsus: 2 μm
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtimine: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 2045
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Tasakaalustusvarras
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy, stable construction
< li>Exact angle adjustment via two handwheels
• punching station with 12 tons of punching pressure on the back

• User-friendly and energy-saving thanks to the hydraulic drive
• Heavy, stable construction
• Solid table with recessed scales and T-slots for precise adjustment of the swiveling stops
• Exact angle adjustment Via two handwheels
• Finger protection cover made of plexiglass for an optimal view of the cutting edge
• Punching station with 12 tons of punching pressure on the back
• Operation via pedal
• Delivered with hydraulic oil

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

OPTIsaw SP 13V on kompaktne ja täpne kaasaskantav metallilintsaag, mis sobib profiilide, torude ja täismaterjali lõikamiseks töökojas või paigaldustöödel. Madala mürataseme, sujuvalt reguleeritava lõikekiiruse ning kuni 60° pööratava saepoogna tõttu on seade ideaalne lahendus nurklõigete tegemiseks. Komplektis olev kvaliteetne bimetallsaelint võimaldab tööd alustada kohe pärast seadme paigaldamist.

Tehnilised andmed:

• Mootori võimsus: 1,0 kW
• Toitepinge: 230 V / 50 Hz
• Saelindi kiirus: 30–80 m/min
• Saelindi mõõt: 1440 × 13 × 0,65 mm
• Lõikenurk: 0° kuni +60°
• Lõikevõime 90° ümarmaterjal: Ø125 mm
• Lõikevõime 90° nelikant: 125 × 125 mm
• Lõikevõime 45° ümarmaterjal: Ø65 mm
• Lõikevõime 45° ristkülikmaterjal: 60 × 65 mm
• Lõikevõime 60° ristkülikmaterjal: 45 × 50 mm
• Mõõtmed: 720 × 300 × 680 mm (avatud asendis)
• Kaal: 19,5 kg

Komplekti kuulub:

• Bimetallsaelint
• Reguleeritav materjalipiirik

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• For punching out corners, shapes, etc.
• Robust construction made of high quality grey cast iron
• Adjustable stops allow comfortable work and repeatability of the notching process
• Scale on the lower cutting edge

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 20 mm.
• Pidev puurimisvõimsus terases (S235JR): 16 mm.
• Maksimaalne freespea läbimõõt: 52 mm.
• Maksimaalne otsfreesi läbimõõt: 12 mm.
• Mootori võimsus: 0,95 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 90-3000 p/min.
• Kiiruste arv: 2 käiguastet, elektrooniline kiiruse reguleerimine.
• Tööriistahoidik: BT20.
• Spindli käik: 40 mm.
• Spindli väljaulatus: 170 mm.
• Laua mõõtmed: 700 × 180 mm.
• T-soonte mõõt: 12 mm.
• T-soonte arv: 3.
• T-soonte vahe: 63 mm.
• Laua kandevõime: 50 kg.
• X-telje käik: 480 mm.
• Y-telje käik: 175 mm.
• Z-telje käik: 270 mm.
• Maksimaalne kaugus spindlist lauani: 360 mm.
• Freesipea kallutus: ±60°.
• Mõõtmed (P × L × K): 745 × 650 × 950 mm.
• Kaal: 120 kg.

Komplekti kuulub:

• Kasutustööriistad

• for cutting metal, paper, plastic and other materials
• with miter stop in front
• hardened knife
• Backgauge with scale

• 10-year OPTIMUM warranty
• Suitable for intensive use in industry
• Heavy industrial grinding machine absorbs the already low vibrations due to high dead weight
• Suitable even with very strong shear forces on the grinding wheels
• Maintenance-free, long-lasting induction motor with smooth running
• Cast iron housing
• Spark protection
• Stable, movable workpiece support
• Grinding wheels not included in the standard scope of delivery