Elektri- ja akutööriistad, tööpingid

• Heavy industrial grinding machine absorbs the high self-weight
  anyway low vibrations
• Also suitable for very strong shear forces on the grinding wheels
• Maintenance-free, durable induction motor with smooth running
• Housing made of cast iron
• spark protection
• Stable, adjustable workpiece support
• Grinding wheels not included in the standard delivery

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Play only available in combination with spring-loaded stop arm SZ 05
• Ideal for miter cutting
• No tilting of the workpiece
• Pneumatic arm retraction (release) from the material stop
• Free stroke 10 mm

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

MBSM 75-200-1 V on kompaktne vertikaalne lintlihvmasin metalli lihvimiseks, servade ümardamiseks ja viimistlemiseks. Tänu ruumisäästlikule konstruktsioonile, võimsale mootorile ja vibratsioonivabale tööle sobib seade suurepäraselt nii töökotta kui ka tootmiskeskkonda.

Tehnilised andmed:

• Toitepinge: 230 V / 50 Hz
• Mootori võimsus: 1,1 kW
• Mootori pöörlemiskiirus: 2800 p/min
• Lihvlindi mõõtmed: 2000 × 75 mm
• Maksimaalne lihvimislaius: 75 mm
• Lindi kiirus: 26 m/s
• Veoratta läbimõõt: 180 mm
• Kontaktketta läbimõõt: 102 mm
• Tolmuärastusühenduse läbimõõt: 76 mm
• Mõõtmed (P × L × K): 420 × 330 × 1080 mm
• Netokaal: 45 kg
• Konstruktsioon: vertikaalne metallilintlihvija

Komplekti sisu:

• Lintlihvmasin MBSM 75-200-1 V
• Töövalmis lihvlindi süsteem
• Kaitseekraan
• Kasutusjuhend

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Best power transmission through aluminium pulleys
• Emergency stop pushbutton switch
• Drilling spindle with precision ball bearings
• Guaranteed concentricity accuracy less than 0.03 mm measured at the drilling spindle
• High-contrast, digital LCD speed display integrated in the housing, speed control by potentiometer
• Dirt- and water-resistant, easy-to-clean membrane keypad
• Glare-free LED lighting integrated in the drill head on the left and right. No disturbing shadows
• Height-adjustable chuck guard with microswitch for maximum protection
• PrePrecisely machined drilling table with parallel T-slots, precisely surface machined
• Drilling table swivels away
• Massive base plate with parallel T-slots

• Versatile range of applications such as drilling, reaming, thread cutting
• Electrically braked motor
• Operating elements with 24V DC electrics and 2-channel safety chain in accordance with DIN EN 12717
• Heavy, solid, high-quality casting
• Wide reach due to horizontally adjustable machine head
• Clearly arranged control panel
• Smooth-running swivel and traversing axles
• Sturdy, torsion-resistant construction of the boom
• Boom height adjustment via powerful motorized drive and lifting spindle
• Gearbox of the drill head runs in an oil bath
• Boom guideways hardened and precision-ground
• Gear wheels made of chrome-nickel steel, hardened and precision-ground for quiet and smooth running
• Drill head and column can be clamped or released together or separately
• Right/left rotation
• Solid, precise drill table, large dimensions
• Hardened and ground clamping table with parallel T-slots
• Machine light
• Overload protection
• Thick-walled cast iron column ensures smooth running and stability
• LED lamp
• Coolant system with coolant tank in the machine base
• Clamping table included in scope of delivery
• Column and headstock mechanically clamped

OptiDrill DP 33 on professionaalne raskeks tööks mõeldud puurpink, mis ühendab suure puurimisvõimsuse, täpse töö ja vastupidava konstruktsiooni. Masin on varustatud võimsa 1,1 kW tööstusmootori, digitaalse sügavusnäidiku, LED-töövalgusti ning kallutatava ja pööratava töölauaga. Spindli viskumine on kuni 0,02 mm, tagades väga täpsed puurimistulemused.

Tehnilised andmed:

• Maksimaalne puurimisvõime terases (S235JR): 30 mm
• Jätkuv puurimisvõime terases: 25 mm
• Mootori võimsus: 1,1 kW
• Toitepinge: 400 V / 3~ / 50 Hz
• Pöörete vahemik: 120–1810 p/min
• Kiiruste arv: 9
• Spindli koonus: MK4
• Spindli käik: 125 mm
• Väljaulatus: 270 mm
• Töölaua mõõtmed: 387 × 387 mm
• Töölaua kallutus: ±45°
• Töölaua pööramine: 360°
• Sambadiameeter: 92 mm
• Mõõtmed (P × L × K): 945 × 485 × 1880 mm
• Kaal: 186 kg

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Maksimaalne töölaius: 1050 mm
• Maksimaalne painutusvõime alumiiniumil: 1,25 mm
• Maksimaalne painutusnurk: 135°
• Maksimaalne sügavus/laius: 570 mm
• Mõõtmed (P × L × K): 1250 × 500 × 970 mm
• Netokaal: 78 kg
• Käsitsi juhitav tooriku kinnitus
• Isemäärduvad liuglaagrid
• Reguleeritav ja fikseeritav painutusnurk suure kordustäpsuse saavutamiseks
• Võimalik täiendada kõrge ülemise tala, segmenteeritud ülemise tala või hanekael-tüüpi ülemise tala lisakomplektidega
• Versioon N = madala ülemise talaga teostus

OptiDrill D 26Pro Special Offer Set on professionaalne puurpink töökotta ja tootmisse, kus on oluline täpsus, töökindlus ja lihtne kasutamine.

Masin on varustatud võimsa tööstusmootori, digitaalse sügavus- ja pöörlemiskiiruse näidiku, kvaliteetse kiirkinnitusega puurpadruni ning edasi-tagasi käiguga.

Tugev konstruktsioon, täppislaagrid ja spindli viskumine alla 0,02 mm tagavad suure täpsuse ka nõudlikel puurimistöödel.

Komplekti kuulub ka masinakruustang, mis võimaldab töödega kohe alustada.

Tehnilised andmed:

• Puurimisvõime terases (S235JR): 25 mm
• Jätkuv puurimisvõime terases: 20 mm
• Mootori võimsus: 0,75 kW
• Toitepinge: 400 V / 50 Hz
• Kiiruste arv: 12
• Pöörete vahemik: 200–2440 p/min
• Spindli koonus: MK3
• Spindli käik: 85 mm
• Spindli väljaulatus: 210 mm
• Töölaua mõõtmed: 330 × 290 mm
• Töölaua kallutus: ±45°
• Töölaua pööramine: 360°
• Maks. kaugus spindel–laud: 720 mm
• Maks. kaugus spindel–alus: 1230 mm
• Sambadiameeter: 80 mm
• Mõõtmed (P × L × K): 670 × 355 × 1640 mm
• Kaal: 85 kg

Komplektis:

• Kiirkinnituspadrun 1–16 mm
• MK3/B16 koonuseadapter
• T-soonemutrid
• Masinakruustang BMP

• Smooth and powerful industrial electric motor
• Separate emergency stop impact switch
• Stable casting column
• depth stop
• Precisely machined drill table with diagonal T-slots and circumferential cooling water channel
• Drilling table 360 ​​° rotatable
• V-belt cover with safety switch
• V-belt quick-clamping device
• Long, ergonomic cast aluminum sleeve lever cast in one piece (B 16H / B 24H with softgrip handles)
• Massive, large base plate with grooves, strongly ribbed on the back
• By swinging away the drilling table, base plate can be used as a work surface for particularly high workpieces
• Guaranteed concentricity measured better than 0.015 mm in the drill quill
• Drill spindle with precision ball bearings
• High-quality OPTIMUM keyless chuck in the standard scope of delivery
• Large, height-adjustable protective screen with safety switch

• machine light

• Forward / reverse operation

• Easy tool change through integrated expeller
• Quillons made of steel

• Digital depth gauge
• Digital speed display

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

LMS 400 P on professionaalne manuaalne kergmetallide ketassaag alumiiniumi, värviliste metallide ja profiilide täpseks lõikamiseks. Varustatud pneumaatiliste kinnitite, suure saeketta ja pööratava saepeaga.

Tehnilised andmed:

• Tüüp: manuaalne kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 400 mm
• Toitepinge: 400 V
• Pneumaatilised materjalikinnitid
• Pööratav saepea nurklõigete tegemiseks
• Sobib profiilide, torude ja alumiiniumdetailide lõikamiseks
• Tugev tööstuslik konstruktsioon

Komplekti sisu:

• Metallkraft LMS 400 P kergmetallide ketassaag
• Pneumaatiline kinnitussüsteem
• Materjalikruustang
• Pikkusepiirik
• Kasutustööriistad
• Kasutusjuhend

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

• Segmented goat foot tool with quick-change system in the upper beam
• Segmented bending bar and bed support
• Backgauge up to 500mm
• Foot quick clamping for workpiece fixation
• Transport rollers with locking brake

Tehnilised andmed:

• Maksimaalne töölaius: 1270 mm
• Maksimaalne lehe paksus terase puhul: 2,0 mm (materjali tõmbetugevus 400 N/mm²)
• Maksimaalne lehe paksus alumiiniumi puhul: 2,4 mm
• Maksimaalne painutusnurk: 135°
• Ülemise tala avaus: kuni 25 mm
• Kõrgus: 1130 mm
• Netokaal: 340 kg
• Brutokaal: 420 kg
• Jalapedaaliga materjali kinnitamine, mis jätab mõlemad käed vabaks detaili käsitsemiseks
• Painutamist hõlbustav abisilinder
• Isemäärduvad liuglaagrid
• Reguleeritav painutusnurga piiraja
• Materjali paksuse reguleerimine rihvelkruvi abil
• Ülemise tala surve jõu reguleerimine libisemiskindlate käsikruvidega
• Varustatud segmenteeritud teravnurkpainutuse tööriistadega, pideva painutuslati ja pideva aluslatiga