Elektri- ja akutööriistad, tööpingid

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Mitre adjustment from -45° to +60°, user-friendly adjustment from the front for better handling, especially with attached roller conveyor
• Robust band guides with adjustable carbide plates for a precise cut
• Saw blade guides with integrated cooling system
• Electromechanical monitoring of the saw blade tension via microswitch
• With chip clearing brush for optimum cleaning and maintenance of the saw blade
• When the saw arm is raised, the lowering cylinder locks automatically in the upper position - no additional locking on the cylinder is required
• Saw arm tilted by 25°, thus extending the service life of the saw blade
• The saw blade stops automatically at the end of the cutting process
• Lowering of the saw arm by gravity or manually (H-DG)
• Turntable with swiveling cutting gap: No cutting into the saw table, therefore always a flat contact surface and therefore greater cutting accuracy
• Ergonomic operating concept
• Clamping lever for angle adjustment from the front: faster adjustment of the cutting angle
• Mounting adapter for roller conveyors included in the scope of delivery
• Vice with quick clamping device

Tehnilised andmed:

• Mootori võimsus: 0,25 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Pöörlemiskiirus: 2980 p/min
• Lihvketta läbimõõt: 150 mm
• Lihvketta laius: 20 mm
• Lihvketta ava läbimõõt: 12,7 mm
• Harja läbimõõt: 200 mm
• Harja laius: 20 mm
• Harja ava läbimõõt: 32 mm
• Netokaal: 8 kg

Komplekti kuulub:

• Lihvketas
• Universaalhari

OPTIsaw SP 17V on kvaliteetne ja kompaktne metallilintsaag professionaalseks kasutamiseks töökodades, hooldustöödel ning paigaldusobjektidel. Tänu võimsale 1,65 kW mootorile, sujuvalt reguleeritavale lõikekiirusele ja kuni 60° pööratavale saeraamile võimaldab saag teha täpseid sirg- ja nurklõikeid erinevates metallmaterjalides. Vastupidav reduktorülekanne ning bimetallsaelint tagavad vaikse töö, väikese vibratsiooni ja pika kasutusea.

Tehnilised andmed:

• Mootori võimsus: 1,65 kW
• Toitepinge: 230 V / 50 Hz
• Lõikekiirus: 30-80 m/min
• Saelindi mõõtmed: 2030 × 20 × 0,9 mm
• Lõikenurk: 0° kuni +60°
• Lõikevõime 0° ümarmaterjal: Ø 170 mm
• Lõikevõime 0° nelikantmaterjal: 170 × 170 mm
• Lõikevõime 0° ristkülikmaterjal: 166 × 166 mm
• Lõikevõime +45° ümarmaterjal: Ø 130 mm
• Lõikevõime +45° nelikantmaterjal: 130 × 130 mm
• Lõikevõime +45° ristkülikmaterjal: 130 × 130 mm
• Lõikevõime +60° ümarmaterjal: Ø 75 mm
• Lõikevõime +60° nelikantmaterjal: 75 × 75 mm
• Lõikevõime +60° ristkülikmaterjal: 75 × 75 mm
• Mõõtmed (P × L × K): 1040 × 480 × 470 mm
• Kaal: 36 kg

Komplekti kuulub:

• Bimetall-saelint
• Reguleeritav materjalipiirik
• Kasutusjuhend

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

Tehnilised andmed:

• Mootori võimsus: 1,5 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Puurimisvõimsus terases (S235JR): 32 mm
• Pidev puurimisvõimsus terases (S235JR): 28 mm
• Pöörete vahemik: 150–2450 p/min
• Kiiruste arv: 12
• Kiiruse reguleerimine: manuaalne
• Spindli koonus: MK4 (MT4)
• Spindli käik: 120 mm
• Ulatus (spindli teljest sambani): 225 mm
• Spindli viskumistäpsus: ≤ 0,02 mm
• Kolonni läbimõõt: 92 mm
• Töölaua mõõtmed: 360 × 360 mm
• T-soonte arv: 2
• T-soonte mõõt: 16 mm
• Töölaua pöördenurk: 360°
• Töölaua kallutus: +45° kuni -45°
• Maksimaalne kaugus spindlist töölauani: 745 mm
• Maksimaalne kaugus spindlist alusplaadini: 1205 mm
• Alusplaadi mõõtmed: 575 × 425 mm
• Mõõdud (P × L × K): 1415 × 650 × 305 mm
• Netokaal: 115 kg
• Brutokaal: 123 kg
• Kvaliteetne kiirpingutatav puurpadrun
• Kõrgusreguleeritav puurpadruni kaitsekate
• Täppiskuullaagritel puurspindel

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• For sawing hollow profiles and solid materials made of steel, stainless steel, tool steel, non-ferrous metals and plastic
• Robust band guides with adjustable carbide plates for a precise cut
• Hydraulically controlled system for both clamping vices and the up and down movement of the saw arm
• With chip clearing brush for optimum cleaning and maintenance of the saw band
• Saw arm inclined by 25°, This extends the service life of the saw blade
• BRP - saw blade monitoring
• The jaws of the two clamping vices are equipped with long-stroke hydraulic cylinders as standard, This eliminates the need for pre-setting to the material cross-section to be sawn
• With pivoting cutting gap for mitre adjustment - does not cut into the saw tableMaterial is fed
• via hydraulic cylindersBandsaw blade guides
• with integrated cooling
• systemSwivel plate
• with
• bearingsCutting probe function
• with integrated buttonWith
• digital angle displayWith
• pivoting control panel

• Bending and rolling of wires, pipes and sheets
• Ground bending rolls
• Mounted steel sidewalls (self-lubricating)
• Two removable rollers
• Separate adjustment for material thickness and rolling radius
• For use on the vise
• Stable support surface
• Wire insert grooves Ø 1 - 2 - 3 - 4 - 5 mm

Tehnilised andmed:

• Lõikeulatus 90° (ümar): Ø350 mm
• Lõikeulatus 90° (ristkülik): 500 × 340 mm
• Lõikeulatus +45°: 350 × 340 mm
• Lõikeulatus -45°: 380 × 340 mm
• Lõikeulatus -60°: 220 × 340 mm
• Lintsae kiirus: 20–100 m/min
• Lintsae mõõt: 4780 × 34 × 1,1 mm
• Materjali etteanne ühe sammuga: 1000 mm
• Maksimaalne materjali etteanne: 9999 mm
• Peamootori võimsus: 3,0 kW
• Hüdraulikapumba võimsus: 0,6 kW
• Jahutuspumba võimsus: 0,12 kW
• Koguvõimsus: 8,5 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Mõõtmed (P × L × K): 3030 × 3150 × 2000 mm
• Kaal: 2150 kg

Komplekti kuulub:

• Lintsaelint
• Jahutuspump
• Kasutustööriistad
• Töökoha valgustus
• Turvavalgustõke (safety light barrier)

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Versatile range of applications, e.g. drilling, reaming, thread cutting
• Electrically braked motor
• 24V DC electrics and 2-channel safety chain in accordance with DIN EN 12717
• Heavy, solid, high-quality casting
• Wide reach thanks to horizontally adjustable machine head
• Clearly arranged control panel
• Smooth-running swivel and traversing axles
• Elaborately crafted column swivel with optimized clamping for maximum stability with minimal clamping offset
• Heavy-duty, torsion-resistant construction of the boom
• Boom height adjustment via powerful motorized drive and lifting spindle
• Gearbox of the drill head runs in an oil bath
• Boom guideways hardened and precision-ground
• Gear wheels made of chrome-nickel steel, hardened and precision-ground for quiet and smooth running
• Drill head and column can be clamped or released together or separately
• Right-left rotation
• Solid, precise drill table, large dimensions
• Hardened and ground clamping table with parallel T-slots
• Machine light
• Overload protection
• Thick-walled cast iron column ensures smooth running and stability
• LED lamp
• Coolant system with coolant tank in the machine base

RD 6 / RD 7

• Column is clamped hydraulically