Elektri- ja akutööriistad, tööpingid

Tehnilised andmed:

• Mootori võimsus: 0,45 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Pöörlemiskiirus: 2850 p/min
• Lihvketta läbimõõt: 175 mm
• Lihvketta laius: 25 mm
• Lihvketta ava läbimõõt: 32 mm
• Tolmuärastusotsiku läbimõõt: 34 mm
• Mõõdud (P × L × K): 389 × 235 × 280 mm
• Netokaal: 14 kg
• Brutokaal: 13,6 kg

Komplekti kuulub: 

• Jämedateraline korund-lihvkivi K36
• Peeneteraline korund-lihvkivi K80

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Sturdy and robust welded construction
• Due to the foot control both hands remain free for the material supply
• High quality cutting blades
• Angle adjustable side stop with millimeter scale
• Easy adjustment of the knife bar
• Highest possible safety through hold-down, which protects the fingers at the same time.
• Up to 500 mm adjustable backgauge

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Handy and flexible pipe grinder for locksmiths, metalworking and railing construction
• Designed for grinding and polishing pipe constructions
• Especially suitable for sanding, satin finishing and mirror polishing of already mounted railings
• Ideal for working in confined spaces, as the handle can be turned through 180 °
• Heavy duty motor with soft start and overload protection
• With constant electronics for consistent belt speed even under load
• With stepless adjustment of the belt speed for an optimal adaptation to the different applications
• Speed ​​can be adjusted comfortably via the thumb wheel on the handle
• Simple, tool-free grinding belt change
• 360 ° circumferential grinding takes only two working steps
• High-quality 270 ° light metal arm with 2 pulleys
• Handle can be screwed in at three different positions for optimal handling

• Industrial motor
• Quiet running spindle thanks to new spindle design
• Machine operation with safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Right/left rotation
• Precision spindle bore
• Control panel with user-friendly, dirt and water resistant membrane keypad
• Speed display
• Separate emergency stop impact switch
• Thread cutting function
• Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel, laterally tiltable by ±45° and 360° rotatable
• Digital depth gauge
• LED machine light integrated in drill head
• V-belt cover with safety switch
• Thick-walled steel column for high force absorption and stability
• Solid, large-dimensioned base plate with T-slots
• Heavy-duty design of the entire machine

Tehnilised andmed:

• Maksimaalne töölaius: 1300 mm
• Maksimaalne painutusnurk: 135°
• Alumiiniumi painutusvõime: 1,2 mm
• Mõõdud (P × L × K): 1480 × 500 × 970 mm
• Maksimaalne laius/sügavus: 570 mm
• Netokaal: 88 kg
• Brutokaal: 86 kg
• Detaili kinnitamine toimub käsitsi klambrite abil
• Lihtne painutusnurga seadistamine tagab suure kordustäpsuse
• Isemäärduvad liuglaagrid

• Suitable for cutting steel and non-ferrous metals
• Heavy, stress-free welded steel construction
• High quality knife
• Sheet metal support arms for large workpieces
• Cut line illumination and long holes in the upper cover plate for an optimal view of the cutting edge for cutting on scratches
• Manual back gauge 630 mm with millimeter precision adjustment
• Photocell for the backgauge area
• The foot control leaves both hands free for the material supply

OPTIsaw SD285E on professionaalne metallilintsaag pööratava saeraamiga, mis sobib täpseks ja efektiivseks terase, roostevaba terase ning värviliste metallide saagimiseks. Tugev malmkonstruktsioon, vibratsioonivaba töö ja hüdrauliliselt reguleeritav saeraami langetus tagavad kvaliteetse lõiketulemuse ka seeriatöödel.

Tehnilised andmed:

• Mootori võimsus: 1,1 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Lõikelindi mõõt: 2480 × 27 × 0,9 mm
• Lõikelindi kiirused: 45 / 90 m/min
• Lõikenurga reguleerimine:-45° kuni +60°
• Netokaal: 245 kg

Lõikevõime:

0°

Ümartoorik: 225 mm

Kandiline materjal: 180 mm

Ristkülikmaterjal: 150 × 245 mm

-45°

Ümartoorik: 120 mm

Kandiline materjal: 120 mm

Ristkülikmaterjal: 150 × 120 mm

+45°

Ümartoorik: 145 mm

Kandiline materjal: 145 mm

Ristkülikmaterjal: 190 × 145 mm

+60°

Ümartoorik: 90 mm

Kandiline materjal: 90 mm

Ristkülikmaterjal: 115 × 90 mm

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

MTBS 2103 F mootoriga giljotiin professionaalseks lehtmetalli lõikamiseks. Töölaius 2040 mm, lõikevõime kuni 3 mm terasel, digitaalne tagapiirik, LED-lõikejoone valgustus ja võimas 3 kW mootor.

Tehnilised andmed:

• Töölaius: 2040 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 34
• Lõikenurk: 2,4°
• Tagapiiriku reguleerimisulatus: kuni 550 mm
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Mõõtmed (P × L × K): 2620 × 1800 × 1500 mm
• Netokaal: 1300 kg
• Õhukulu tsükli kohta: 4 l
• Tagapiiriku juhtimine: käsiratas ja digitaalne näidik masina esiküljelt
• Väljatõmmatavad eesmised tuged: jah
• Töölaua mõõteskaala: 10 mm gradueeringuga

Komplekti sisu:

• MTBS 2103 F mootoriga giljotiin
• Eest juhitav manuaalne tagapiirik digitaalse näidikuga
• 90° külgpiirik pikkusega 1000 mm
• LED-lõikejoone valgustus
• Jalapedaal hädaseiskamisfunktsiooniga
• Väljatõmmatavad eesmised lehetoed
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Töölaua mõõteskaala
• Valgusbarjääriga kaitstud tagumine ala

• Frequency converter
• User-friendly membrane keyboard
• Digital speed display
• Tapping function
• Smooth running thanks to ground multi-tooth driver
• High concentricity due to hardened and ground main spindle
• Low-maintenance gearbox with grease lubrication
• Gearbox with PA6 gears
• Large speed range
• User-friendly membrane keyboard
• Heavy, solid cast construction
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Drilling depth stop adjustable with millimeter scale
• Forward / reverse operation
• Machine light integrated in the drill head
• Integrated expeller for easy tool change
• Precision machined drilling table with diagonal T-slots with all-round cooling water channel
• Thick-walled cast-iron column for high power absorption and stability
• Massive base plate, large dimensions and strongly ribbed on the back

• Automatic quill feed
• Coolant device and chip filter according to Machinery Directive

• Control with 49 programs with each 99 possible individual steps
• Two cutting speeds
• Machine head guided vertically, with dovetail guide and adjustable wedge strip
• Machine head can be swiveled 45° to the left and 45° to the right, with locking at 45°, 0°, -45°
• Stable and robust construction
• Simple and intuitive operation
• Adjustable depth stop for the vertical stroke of the saw head
• Reduction gear, silent in oil bath running
• Coolant pump with coolant filter
• Coolant distribution for better lubrication
• Transversely movable hydraulic quick-action vice with anti-jaw device
• Chip breaker T6 for blade cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch, undervoltage release and overload protection
• Quality Made in Europe

• Material feed
• Closing the vice and activating the motor
• Activation of the coolant pump and lowering of the saw head for cutting
• Return of the feed carriage to the specified dimension
• Return of the saw head to starting position
• Opening the vise
• Repeat cycle

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 20 mm.
• Pidev puurimisvõimsus terases (S235JR): 16 mm.
• Maksimaalne freespea läbimõõt: 52 mm.
• Maksimaalne otsfreesi läbimõõt: 12 mm.
• Mootori võimsus: 0,95 kW.
• Toitepinge: 230 V / 50 Hz.
• Freesipea kallutus: ±60°.
• Laua mõõtmed: 700 × 180 mm.
• T-soonte mõõt: 12 mm.
• T-soonte arv: 3.
• T-soonte vahe: 63 mm.
• Mõõtmed (P × L × K): 745 × 650 × 950 mm.
• Kaal: 120 kg.

Komplekti kuulub:

• Digitaalne positsioneerimisnäidik DRO 5.

MTBS 1350-30 B mootoriga giljotiin NC-juhitava tagapiirikuga. Töölaius 1350 mm, lõikevõime kuni 3 mm terasel, LED-lõikejoone valgustus, reguleeritav lõikevahe ja võimas 3 kW mootor professionaalseks metallitööks.

Tehnilised andmed:

• Töölaius: 1350 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 3,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 1,5 mm
• Lõigete arv minutis: 40
• Lõikenurk: 2,2°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiirik: mootoriga, NC-juhitav
• Tagapiiriku ajam: sagedusmuundur, pidurmootor ja kuulkruvid
• Mootori võimsus: 3 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 4 l
• Mõõtmed (P × L × K): 1920 × 1920 × 1110 mm
• Netokaal: 1150 kg
• Töölaua tugi roostevabast terasest: jah

Komplekti sisu:

• MTBS 1350-30 B mootoriga giljotiin
• NC-juhitav tagapiirik (reguleerimisulatus kuni 750 mm)
• 90° külgpiirik pikkusega 1000 mm
• Kaks tugevat lehetuge T-soonte ja kallutuskambritega
• LED-lõikejoone valgustus
• Reguleeritav lõikevahe
• Jalapedaaliga mobiilne juhtkonsool koos hädaseiskamisnupuga
• Pööratavad lõiketerad roostevaba terase lõikamiseks
• Survetala kummist kaitsesisestega
• Valgusbarjääriga kaitstud tagumine ala

Tehnilised andmed:

• Maksimaalne töölaius: 2500 mm
• Maksimaalne painutusvõime terasel (400 N/mm²): 0,8 mm
• Mõõdud (P × L × K): 2950 × 660 × 1000 mm
• Netokaal: 304 kg
• Brutokaal: 379 kg
• Kerge konstruktsiooniga mobiilne painutuspink alusraamil
• Sobib katuseplekkseppadele ja plekitööde paigaldajatele neeluplekkide, korstnakatete ja muude profiildetailide valmistamiseks
• Varustatud transpordirataste ja seisupiduriga
• Lihtne ja vastupidav konstruktsioon tagab täpse töö
• Materjalisõbralik ja ohutu töörežiim
• Detaili kindel kinnitamine hoova abil
• Painutamine toimub kaarhoova abil

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system