Elektri- ja akutööriistad, tööpingid

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• Quick clamping system enables fast sanding belt changes
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• Motorised height adjustment of the work table
• Conveyor table with profile conveyor belt for optimum stability during transportduring processing
• NC control with 8" touch screen

Tänu sujuvalt reguleeritavale lõikekiirusele, vastupidavale reduktorülekandele ja kuni 60° pööratavale saeraamile võimaldab masin töödelda erinevaid metallmaterjale täpselt, vaikselt ja väikese vibratsiooniga. Standardvarustuses olev kvaliteetne bimetallsaelint tagab pika kasutusea ning puhta lõiketulemuse.

Tehnilised andmed:

• Saelindi mõõtmed: 1735 × 13 × 0,9 mm
• Lõikenurk: 0° kuni +60°
• Ajam: elektrooniliselt reguleeritav Vario-mootor
• Konstruktsioon: spetsiaalne reduktor kahe karastatud terashammasrattaga
• Standardvarustus: bimetall-saelint

Komplekti kuulub:

• Bimetall-saelint
• Reguleeritav materjalipiirik
• Kasutusvalmis lintsaag standardvarustuses

• Heavy welded steel construction
• Horizontal and vertical working possibility
• Hydraulic feed of the upper roller
• Digital display for feed roller
• All 3 rollers driven and hardened
• Lateral straightening rollers, infinitely adjustable
• Separate control panel with foot control

• Tube bending rolls
• Angle bending rolls
• Special straightening rolls
• Profile bending rolls
• Plastic rollers for soft materials

• Please indicate the type of material to be processed when ordering!
• NC-control Art. No. 3880163: Cannot be retrofitted, only for new machine orders!

• Optionally the machine can be equipped with bending rolls especially for your requirements.
• Also untypical sizes can be produced on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

Tehnilised andmed:

• Mootori võimsus: 2,2 kW
• Hüdraulikapumba võimsus: 1,4 kW
• Jahutuspumba võimsus: 50 W
• Koguvõimsus: 3,8 kW
• Toitepinge: 400 V / 50 Hz
• Saelindi kiirus: 15-100 m/min
• Saelindi mõõtmed: 2925 × 27 × 0,9 mm
• Lõikenurk: -45° kuni +60°
• Lõikevõime 0° ümarmaterjal: Ø 270 mm
• Lõikevõime 0° nelikantmaterjal: 230 × 230 mm
• Lõikevõime 0° ristkülikmaterjal: 230 × 350 mm
• Lõikevõime -45° ümarmaterjal: Ø 230 mm
• Lõikevõime -45° nelikantmaterjal: 170 × 170 mm
• Lõikevõime -45° ristkülikmaterjal: 140 × 200 mm
• Lõikevõime +45° ümarmaterjal: Ø 230 mm
• Lõikevõime +45° nelikantmaterjal: 200 × 200 mm
• Lõikevõime +45° ristkülikmaterjal: 210 × 220 mm
• Lõikevõime +60° ümarmaterjal: Ø 140 mm
• Lõikevõime +60° nelikantmaterjal: 140 × 140 mm
• Lõikevõime +60° ristkülikmaterjal: 140 × 220 mm
• Mõõtmed (P × L × K): 1935 × 1425 × 1626 mm
• Kaal: 600 kg

Komplekti kuulub:

• Bimetall-saelint M42 (4-6 TPI)
• Materjalipiirik
• Masina alusraam
• Jahutussüsteem
• Hüdrauliline kiirkinnitusega kruustang

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Stop track with length stop, manual measuring system with mm scale and reading magnifier
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• Maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Changing the sanding belt in seconds due to the quick-release system
• Automatic re-tensioning of the sanding belt using the spring-loaded belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt tracking via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model

Tolmueemalduskomplekt AS 1601 on professionaalne lahendus tolmu ja peenosakeste eemaldamiseks metallitöötluses ning lihvimistöödel. Parandab töökeskkonna puhtust ja tööohutust. 

Komplekti sisu:

• Tolmueemaldusseade AS 1601
• Voolikute ja ühenduste komplekt
• Filtreerimissüsteemi põhikomponendid
• Kasutusjuhend

• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

• For supporting long and heavy workpieces
• Universally applicable for eg metal circular saws, band saws, woodworking machines, etc.
• Roller support infinitely height adjustable and clampable
• Safe workpiece support thanks to solid and heavy-duty steel rollers
• Heavy three-legged version for highest load

MKS 315 V on professionaalne vertikaalne metalliketassaag terase, torude ja profiilmaterjalide täpseks lõikamiseks. Varustatud pööratava saepea, jahutussüsteemi ja tugeva reduktorajamiga, sobides tööstuslikuks kasutamiseks.

Tehnilised andmed:

• Tüüp: vertikaalne metalliketassaag
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Saeketta läbimõõt: 315 mm
• Vertikaalne lõikepõhimõte
• Sobib terase, torude ja profiilmaterjalide lõikamiseks
• Õlivannis töötav reduktor
• Integreeritud jahutussüsteem
• Jahutusvedeliku filter
• Liigutatav kaitsekate
• Juhtsüsteem madalpingel 24 V
• Avariiseiskamislüliti
• Ülekoormuskaitse

Komplekti sisu:

• Metallketassaag Metallkraft MKS 315 V
• Jahutussüsteem
• Pikkusepiirik
• Kasutustööriistad

• Cold bending up to an angle of 180 °
• Adjustable bending angle stop for high repeat accuracy
• with the option UB 11 also for bending spirals
• with screw-on base for the workshop
• easy to transport, ideal for workshop, on assembly and in service trolley
• Removable bending unit, with optional clamping plate can also be used on a vice
• Quality Made in Europe

Tehnilised andmed:

• Mootori võimsus: 9 kW
• Kogu tarbitav võimsus: 17,7 kW
• Jahutuspumba võimsus: 0,16 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Lindikiiirus: 15–150 m/min
• Saelindi mõõt: 6830 × 54 × 1,3 mm
• Materjali etteanne ühe tsükliga: 730 mm
• Maksimaalne etteandepikkus: 9999 mm
• Minimaalne etteandepikkus: 3 mm
• Minimaalne lõikepikkus: 10 mm
• Minimaalne materjali läbimõõt: 30 mm
• Jäägi pikkus automaatrežiimis: 90 mm
• Mõõtmed (P × L × K): 3300 × 2100 × 2340 mm
• Netokaal: 6100 kg
• Lõikevõime 0°
• Ümartoru: Ø 450 mm
• Täismaterjal ümarlõige: Ø 450 mm
• Ristkülikprofiil: 450 × 450 mm
• Pakettlõikus: 450 × 300 mm

Standardvarustus:

• ARP automaatne etteandesüsteem
• Sagedusmuundur
• Automaatne saelindi juhiku reguleerimine
• Mootoriga laastuhari
• Kiibikonveier
• Kaks LED-töövalgustit
• Saelint

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Smooth and powerful brushless drive
• Separate emergency stop impact switch
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Long, ergonomic aluminum die-cast quill lever
  One piece cast (B 24HV with softgrip handles)
• Depth stop
• Belt cover with safety switch
• Forward / reverse operation
• Machine light

• Quillons made of steel
• Coolant system
• Chip filter according to the Machinery Directive
• Easy tool change through integrated expeller

• Quill stroke 160 mm
• Tapping function
• Digital depth gauge

• Operating mode "auto"
  • Engine starts automatically after lever movement
  • Stops again in the starting position
  • Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
• Operating mode "tapping"
  • Engine is activated by moving the handle down
  • The direction of rotation is changed by limit switches on the adjustable drilling depth stop

• Especially quiet running
• High performance
• Approximately constant torque over the entire speed range

• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver

• integrated in the housing

• by means of potentiometer

• Guaranteed ; 0.015 mm measured in the quill

• Precision ball bearings
• High quality OPTIMUM keyless chuck as standard

• Integrated in the drill head
• Halogen lamp

• Precisely worked
• Diagonal T-slots
• 360 ° rotatable
• Circulating cooling water channel

• Solid
• Large dimensions
• Heavily ribbed on the reverse side

• Thick-walled
• High power and stability

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle