Garaažitehnika ja autotarvikud

AIRPROFI 853/270/10 H Silent on professionaalne vaikse tööga kolbkompressor, mille 270-liitrine mahuti, 10-barine töörõhk ja kuni 850 l/min imemisvõimsus tagavad suure jõudluse. Efektiivne tootlikkus kuni 680 l/min ning mürasummutav korpus muudavad selle ideaalseks valikuks töökodadesse, hooldusettevõtetesse ja tootmisruumidesse, kus hinnatakse nii võimsust kui ka madalat mürataset.

Tehnilised andmed:

• Tüüp: vaikne kolbkompressor
• Mahuti maht: 270 l
• Maksimaalne töörõhk: 10 bar
• Imemisvõimsus: 850 l/min
• Efektiivne tootlikkus: 680 l/min
• Mootori võimsus: 5,5 kW
• Toitepinge: 400 V / 50 Hz
• Silindrite arv: 2
• Surveastmete arv: 2
• Pöörlemiskiirus: 1200 p/min
• Müratase: 69 dB(A)
• Vaikse tööga mürasummutav korpus
• Õhuväljavõte: 3/4"
• Kaal: ca 245 kg

• Smooth-running, oil-free V-unit
• High-quality maximum equipment
• Compressed air lines and containers with a long service life
• Comfort safety quick couplings for maximum work safety
• Comfortable, back-friendly transport in an upright position and without lifting

• Designed for demanding continuous use when oil-free and clean compressed air is required
• Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
• Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
• Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
• The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon

• Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
• One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
• Two comfort safety quick couplings
• High-quality CONDOR pressure switch
• One pressure gauge each for container and working pressure
• Simple condensate drain via ball valve

• Flexible armored hose line with heat protection prevents vibration fractures
• Inside and outside hot-dip galvanized, corrosion-protected compressed air tank with 15-year warranty against rusting through

• One-hand safety couplings according to DIN EN 983 used as standard by AIRCRAFT as first manufacturer
• Two separate locking systems for maximum working safety
• No whipping of the hose line during uncoupling

• Transport back-friendly in upright position and without lifting
• Additional transport handle directly on the container
• Puncture-proof PU foam wheels
• Stable steering chassis with parking brake

• Fully automatic on-off operation
• With all safety devices
• Completely ready for connection

• For highly efficient separation of large quantities of condensate from compressed air and vacuum systems
Installation between compressor and compressed air tank
• Filter housing made of aluminum and anodized inside
• Separation of condensate (water, oil) and dirt particles by centrifugal acceleration of the compressed air
• The condensate drain with float valve is used to separate the condensate from the water separator
• Electronic condensate drain can be retrofitted

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation

A-PLUS 38-08 K on võimas tööstuslik kruvikompressor 37 kW mootoriga. Maksimaalne rõhk 8 bar, tootlikkus kuni 6000 l/min, madal müratase ning energiatõhus rihmülekandega konstruktsioon nõudlikuks professionaalseks kasutamiseks.

Tehnilised andmed:

• Kompressori tüüp: rihmülekandega kruvikompressor
• Paigaldusviis: statsionaarne
• Määrimine: õlitatud
• Maksimaalne töörõhk: 8 bar
• Efektiivne tootlikkus: 6000 l/min
• Õhuväljalaske ühendus: 1¼"
• Mootori võimsus: 37 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori tüüp: elektrimootor
• Helirõhutase: 68 dB(A)
• Ülekanne: soonrihm 
• Pikkus: 1860 mm
• Laius/sügavus: 830 mm
• Kõrgus: 1440 mm
• Kaal: 780 kg

Komplekti sisu:

• A-PLUS 38-08 K kruvikompressor
• NRG elektrooniline mikroprotsessorjuhtimine
• Temperatuurijuhtimisega tsentrifugaalventilaator
• Ülemõõduline kombijahuti
• Integreeritud nädalataimer
• Täht-kolmnurk käivitussüsteem
• Rihmülekandega ajamisüsteem

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Suitable for compressed air with full free passage
• Temperature resistant from -20 ° C to + 180 ° C

Aircraft ACS 3,5-10-22 kruvikompressor tagab kuni 380 l/min õhutootlikkuse ja 10-barise töörõhu. Kompaktne, vaikne ning energiasäästlik lahendus pidevaks suruõhu tootmiseks töökodades, hoolduses ja ehitusobjektidel.

Tehnilised andmed:

• Kompressori tüüp: õliga määritud kruvikompressor
• Mootori võimsus: 4 kW
• Toitepinge: 400 V, 3-faasiline
• Maksimaalne töörõhk: 10 bar
• Efektiivne õhutootlikkus: umbes 380 l/min
• Suruõhumahuti maht: 22 l
• Müratase: 65 dB(A)
• Töörežiim: S1 pidevtöö
• Kaitseklass: IP54
• Mõõtmed (P × L × K): 1020 × 700 × 720 mm
• Kaal: umbes 88 kg
• Õhu väljavõte: 1/2"
• Ajam: hooldusvaba otseajam
• Juhtimine: K-Tronic elektrooniline juhtsüsteem
• Õlijahutus: täiendav õli-soojusvaheti
• Õhufiltreerimine: filtreeritud ja õlitatud suruõhu väljavõtted olemas

Komplekti sisu:

• Aircraft ACS 3,5-10-22 kruvikompressor
• 22-liitrine pulbervärvitud suruõhumahuti
• Filtriga rõhuregulaator
• Õlitaja (mist lubricator)
• Kiirliitmik filtreerimata suruõhu jaoks
• Kiirliitmik filtreeritud suruõhu jaoks
• Kiirliitmik filtreeritud ja õlitatud suruõhu jaoks
• Integreeritud K-Tronic juhtimissüsteem
• Kasutus- ja hooldusdokumentatsioon

• Suitable for machines up to 3500 W
• Suitable for capacitor motors
• Two sockets: one with inrush current limitation, the other with function such as the household socket for less powerful machines, such as a drill or hand lamp
• Plastic housings and sockets splash-proof
• Fully electronic, therefore no wear parts, e.g.: relay
• Built-in test function lamp
• Operating voltage 230 volts
• Mains frequency 50 or 60 Hz

BEKO CLEARPOINT® 3eco S040 SWF ultrapeenfilter eemaldab suruõhust kuni 0,01 μm suurused osakesed ning vähendab õliaerosoolide sisaldust kuni 0,005 mg/m³. Vooluoptimeeritud konstruktsioon, madal rõhukadu ja kõrge filtreerimistõhusus teevad sellest ideaalse lahenduse rakendustele, kus nõutakse väga puhast suruõhku.

Tehnilised andmed:

Üldandmed:

• Tootja: BEKO Technologies GmbH
• Mudel: CLEARPOINT® 3eco S040 SWF
• Tootjakood: 2044067
• Õhuühendus: 3/8"
• Vooluhulk: 35 m³/h
• Vooluhulk: 580 l/min (7 bar rõhu juures)

Filtreerimisomadused:

• Osakeste eraldusvõime: 0,01 μm
• Õliaerosoolide jääksisaldus: 0,005 mg/m³ temperatuuril 20 °C ja rõhul 1 bar
• Õliaurude jääksisaldus: kuni 0,003 mg/m³ temperatuuril 20 °C ja rõhul 1 bar
• Suruõhu kvaliteediklass vastavalt ISO 8573-1: 1.-.2
• Kuivrõhukadu: 0,06 bar

Mõõtmed ja kaal:

• Laius: 75 mm
• Kõrgus: 180 mm
• Kaal: 1 kg

• Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
• Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1
• operating conditions according to AD 2000 - S1 (10/2000) = starts and stops and 20% pressure fluctuation range

Tehnilised andmed:

• Kompressori tüüp: kruvikompressor
• Mootori efektiivsusklass: IE3
• Nimivõimsus: 15 kW
• Maksimaalne töörõhk: 10 bar
• Juhtsüsteem: LOGIN digitaalne juhtimine 4,3-tollise puuteekraaniga
• Pöörlemiskiiruse reguleerimine: sagedusjuhtimine (variable speed)
• Maksimaalne müratase: 67 dB(A)
• Võimalik ühendada kuni 8 kompressorit ühte süsteemi
• Varustatud järeljahutiga
• Jahutus: termostaadiga juhitav tsentrifugaalventilaator
• Netokaal: 263 kg

Komplekti sisu:

• A-K-MAX 15-10 VS (IE3) kruvikompressor
• Integreeritud LOGIN juhtsüsteem 4,3" puuteekraaniga
• Integreeritud järeljahuti

AIRPROFI BK 703/13/10 on professionaalne statsionaarne lisakompressor 10 bar töörõhu ja kuni 520 l/min tootlikkusega. Ideaalne olemasoleva suruõhusüsteemi võimsuse suurendamiseks ja tippkoormuste katmiseks.

Tehnilised andmed:

• Kompressori tüüp: statsionaarne lisakompressor
• Kompressorisüsteem: HOS
• Kompressori tüüp: õliga määritav
• Maksimaalne töörõhk: 10 bar
• Paagi maht: 13 l
• Imemisjõudlus: 650 l/min
• Tootlikkus: 520 l/min (6 bar töörõhul)
• Silindrite arv: 2
• Surveastmete arv: 2
• Mootori võimsus: 4 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Õhu väljund: 3/4"
• Müratase (LpA): 83 dB(A)
• Pikkus: 685 mm
• Laius: 745 mm
• Kõrgus: 675 mm
• Kaal: 55 kg
• Survelüliti: CONDOR
• Mootorikaitselüliti: olemas
• Vahejahuti: olemas
• Järeljahuti: olemas
• Paagi viimistlus: kuumtsingitud
• Õhumahuti garantii: 15 aastat roostetamise vastu

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for the separation of oil vapors, odors and flavorings via adsorption and in the second stage of solid particles
• Residual content of oil vapor up to 0.005 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 45 ° C
• Compressed air quality according to ISO 8573-1
• For compressed air of the highest quality, eg, for breathing air, in analytical technology or semi-luxury bottling
• Pure compressed air in connection with upstream ultrafine filter
• with filter element and manual drain

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain