AIRPROFI 853/10 Silent on professionaalne statsionaarne kolbkompressor mürasummutavas korpuses. Seadme imemisvõimsus on kuni 850 l/min ja efektiivne tootlikkus kuni 680 l/min. Maksimaalne töörõhk 10 bar ning madal müratase muudavad selle ideaalseks valikuks töökodadesse, tootmisettevõtetesse ja hooldusruumidesse, kus on oluline võimas suruõhuvarustus ja vaikne töö.
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Two-cylinder high-performance units made of gray cast iron for a long service life
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Two-cylinder high-performance units made of gray cast iron for a long service life
Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
Quality electric motor with high starting torque
Electric motor equipped with motor protection switch
Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
Sturdy metal belt guard
400 volt models with phase inverter as standard for easy manual reversal of the direction of rotation
Compressed air tank equipped with safety valve, tank pressure gauge and condensate drain valve
Including all safety devices
Completely ready for connection
Filter pressure regulator with one pressure gauge for regulated compressed air cleaned of condensate, dirt and oil, second pressure gauge for tank pressure
Ten-year guarantee against rusting through on powder-coated compressed air tanks
Includes high-quality one composite safety coupling and high-quality CONDOR pressure switch
Flexible armored hose line with heat protection for long service life without vibration breakage
Ergonomic handle, rubber handle and transport handle on the compressed air tank for convenient transportation
Sturdy steering chassis with parking brake in combination with large, puncture-proof wheels for comfortable transportation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-PLUS 55-08 on suure jõudlusega tööstuslik kruvikompressor, mis on mõeldud pidevaks kasutamiseks tootmisettevõtetes, töökodades ja suruõhusüsteemides. Helisummutatud konstruktsioon, vastupidavad CNC-töödeldud komponendid ning intelligentne NRG mikroprotsessorjuhtimine tagavad kõrge töökindluse, energiatõhusa töö ja lihtsa hoolduse.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air lines and tanks with long service life
Comfort safety quick-release couplings for maximum work safety
Comfortable, back-friendly transportation in an upright position and without lifting
Developed for demanding continuous use when oil-free and clean compressed air is required
Air is blown through the cylinder's cooling chambers by means of a fan; this achieves optimum cooling
Large piston, movably mounted, thus 60% more power compared to tilting piston systems
Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
The high-performance piston or piston ring made from a special graphite-Teflon-carbon mixture has a much longer service life than a simple Teflon piston ring
High-quality maximum equipment
Filter pressure regulator for infinitely variable adjustment of the working pressure, with simultaneous dirt, oil and condensate separation
One compressed air outlet each for filtered compressed air, filtered and lubricated compressed air and a direct outlet on the compressed air tank
Two convenient safety quick-release couplings
High-quality CONDOR pressure switch
One pressure gauge each for tank and working pressure
Simple condensate drain via ball valve
Compressed air lines and tanks with long service life
Flexible armored hose line with heat protection prevents vibration fractures
Internally and externally hot-dip galvanized, corrosion-protected compressed air tank with 15-year guarantee against rusting through
Comfort safety quick-release couplings
One-hand safety couplings in accordance with DIN EN 983 from AIRCRAFT as the first manufacturer to be used as standard
Two separate locking systems for maximum work safety
No whipping of the hose line when uncoupling
Convenient transportation
Back-friendly transportation in an upright position and without lifting
Additional transport handle directly on the container
Puncture-proof PU foam wheels
Sturdy steering chassis with parking brake
Ready for immediate use
Fully automatic on/off operation
With all safety devices
Completely ready for connection
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-MICRO 4.0-08-200 K on 4 kW kruvikompressor integreeritud külmkuivati ja 200-liitrise mahutiga. Tootlikkus kuni 580 l/min, töörõhk 8 bar ning müratase vaid 60 dB(A). Sobib pidevaks kasutamiseks tööstuses ja töökodades.
A-DUO-MICRO SE 4.0-08 2x100 on statsionaarne kruvikompressor kahe suruõhumahutiga, mis tagab suure suruõhuvaru ning võimaldab katta lühiajalisi suuremaid õhutarbeid. Rihmülekandega kruvikompressor sobib töökodadesse ja tootmisettevõtetesse, kus hinnatakse töökindlust, energiasäästlikkust ja madalat mürataset.
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-PLUS 45-08 on töökindel 45 kW kruvikompressor, mille tootlikkus ulatub kuni 7200 l/min ja maksimaalne töörõhk on 7,5 bar. Ideaalne valik tööstuslikeks suruõhurakendusteks, kus on oluline energiatõhusus ja madal müratase.
