GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Sanding papers 93 x 230 mm, P180, 5 pieces, without holes 58T261 by GRAPHITE are P180 gradation papers suitable for sanding metal, wood and plastics. A type C paper base, designed for machine sanding, is used to make a single sheet. The semi-open structure, with 100% of the abrasive grain (electrocorundum) covering the surface, ensures good performance. GRAPHITE sanding papers are offered in a practical set of 5.
The 100 x 20 mm wire wheel brush, crimped wire, brassed 57T408 by GRAPHITE is made of crimped brassed wire. It has a maximum rotational speed of 6,000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.3 mm (1/2"), 2 x 16 mm (5/8"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for many tasks, including aggressive cleaning and roughing pre-machining.
Velcro sanding discs 150 mm, P80, 5 pieces, without holes 58T173 by GRAPHITE are discs without holes for metal, wood and plastic. Gradation P80 - medium grade - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro attachment allows for quick replacement of GRAPHITE discs and comfortable working.
The TiN, 4 mm 54T403 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 4 mm and an overall length of 68 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
The 70 mm diameter, twisted steel wire, M14, 57T413 wire butt brush by GRAPHITE is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Saw blade, widia, 190 x 30 mm, 50 teeth 57T224 by GRAPHITE, with an external diameter of 190 mm and a mounting hole diameter of 30 mm. It has 50 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The 10 x 250 mm ground concrete drill bit 56T306 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 10 mm, an overall length of 250 mm and a working length of 150 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Saw blade, widia, 315 x 30 mm, 40 teeth 57T234 by GRAPHITE, with an external diameter of 315 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.8 mm and the tooth angle is 15°. The maximum speed is 5,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
GRAPHITE's 41mm bi-metal hole saw 56T710 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 210 rpm, Inox steel - 105 rpm, aluminium - 315 rpm, wood - 230 rpm, cast iron - 140 rpm, brass - 280 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Sanding grid white 115 x 280 mm, P100 58T142 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
The Hex 6.0 mm wood drill bit 54T580 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX chuck. It is characterised by a diameter of 6 mm and a length of 115 mm. It is suitable for tasks with a maximum speed of 2500 rpm. It will work well for many DIY tasks.
Hole saws with adapter, 32-54 mm, set of 6 pieces 56T722 by GRAPHITE contains six pieces. The set includes holesaws with diameters: 32 mm, 38 mm, 51 mm and 54 mm. Included - an adapter with a 6 mm diameter pilot drill bit and an Allen spanner, allow for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
GRAPHITE's 51mm 56T712 bi-metal hole saw, 44mm high, allows drilling to a depth of 38mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 170 rpm, Inox steel - 85 rpm, aluminium - 255 rpm, wood - 200 rpm, cast iron - 115 rpm, brass - 230 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Grinding wheel, corundum for metal 125 x 6 x 22.2 mm, 27 A24-R-BF, convex 57T114 by GRAPHITE marked type 27 A24-R-BF is a convex tool, designed for grinding metal. It has a diameter of 125 mm, a thickness of 6 mm and a mounting hole of 22.2 mm. The maximum speed is 12,200 rpm - with a simultaneous working speed of 80 m/s. The product meets the requirements of EN 12413, ensuring safety and quality work. The GRAPHITE brand sanding disc will be suitable for metalworking, workshop applications.
GRAPHITE's 8 x 120 mm 56T207 concrete drill bit with cylindrical shank, has a diameter of 8 mm, an overall length of 120 mm and a working length of 72 mm. Recommended for concrete, brick and stone applications.
GRAPHITE's 83mm bi-metal hole saw 56T719 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 105 rpm, Inox steel - 50 rpm, aluminium - 155 rpm, wood - 140 rpm, cast iron - 70 rpm, brass - 140 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 40mm 56T736 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
