GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
Sanding cloth 230 x 280 mm, P80, 58T345 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for pre-smoothing coatings.
Sanding cloth 230 x 280 mm, P36, 58T341 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand sanding canvas is recommended for coarse coating removal.
GRAPHITE's 4 x 75mm 56T201 concrete drill bit with cylindrical shank, has a diameter of 4mm, an overall length of 75mm and a working length of 45mm. Recommended for concrete, brick and stone applications.
Sanding grid white 115 x 280 mm, P220 58T146 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
The 10 x 120 mm ground concrete drill bit 56T305 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 10 mm, an overall length of 120 mm and a working length of 72 mm. The GRAPHITE drill bit will prove useful in domestic applications.
GRAPHITE's 7/10 mm 54T402 confirmat drill bit characterised by an overall length of 100 mm and a working part length of 70 mm. Equipped with a cylindrical handle. Designed for drilling holes for confiirmate screws. GRAPHITE brand drills are useful in the toolbox of every do-it-yourselfer.
Water sandpaper 230 x 280 mm, P240, 58T217 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
The 8 x 120 mm ground concrete drill bit 56T303 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 8 mm, an overall length of 120 mm and a working length of 72 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Yellow sanding paper in roll 2.5 m x 115 mm, P120, 58T424 by GRAPHITE is a product designed for sanding surfaces such as metal, wood, plastic and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open grain, in which the surface is coated with 50-60% electro-corundum abrasive grain, the paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and gypsum sanding trowels.
Water sandpaper 230 x 280 mm, P2500, 58T231 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Jigsaw blade, 12 TPI, HSS, U-shaped handle, 2 pieces 57T526 by GRAPHITE is a jigsaw blade with a tooth density of 12 TPI, made of HSS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 76 mm, a working length of 50 mm, a width of 8 mm, a thickness of 1 mm and a tooth spacing of 2 mm. It is designed for work with medium-thick sheet metal (2.5-6 mm). The GRAPHITE brand blade allows for basic cutting.
Turbo diamond cutting wheel, 115 x 22.2 mm, dry 57T315 by GRAPHITE is a turbo dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The 100 mm, crimped wire, steel butt brush with 6 mm shank 57T415 by GRAPHITE is made of crimped steel wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
Sanding discs, perforated, on Velcro with holes 225 mm, P40, 5 pieces 58T270 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows the worn accessory to be quickly replaced. They are characterised by the grain of electro-corundum and the open type of grit. GRAPHITE brand abrasive discs are recommended for many tasks.
Sanding grid white 115 x 280 mm, P80 58T141 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by its double-sided grit and white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
Water sandpaper 230 x 280 mm, P100, 58T212 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
GRAPHITE's 100 mm diameter wire wheel brush, crimped steel wire, M14, 57T410 is made of crimped steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product complies with the EN 1083-2 standard and is well suited for working on metal surfaces, cleaning, removing rust, paint or dirt.
18 V harjavaba akunurklihvija (58G026) on võimas ja vastupidav tööriist metalli, kivi ning teiste materjalide lõikamis-, lihvimis- ja puhastustöödeks. Tänu harjavabale mootorile tagab seade suure jõudluse, pikema kasutusea ning väiksema hooldusvajaduse.
Nurklihvija on mõeldud kasutamiseks 125 × 22,2 mm ketastega ning selle pöörlemiskiirus ulatub kuni 10 000 p/min, võimaldades tõhusat materjalitöötlust nii ehitusel, töökojas kui ka kodustes remonditöödes.
Tööriist on varustatud M14 spindlikeermega ning kolme asendiga külgkäepidemega, mis võimaldab valida töö jaoks kõige mugavama haardeasendi. Kompaktne konstruktsioon ja vaid 1,7 kg kaal muudavad seadme hästi käsitsetavaks ka pikemaajalisel kasutamisel.
Tehnilised andmed:
Toitepinge: 18 V (ENERGY+ akusüsteem)
Mootor: harjavaba
Ketta mõõt: 125 × 22,2 mm
Maksimaalne pöörlemiskiirus: 10 000 p/min
Spindlikeere: M14
Kaal: 1,7 kg
Omadused ja eelised:
Harjavaba mootor suure võimsuse ja pika tööea tagamiseks
Sobib lõikamis-, lihvimis- ja puhastustöödeks
Kolme asendiga külgkäepide mugavamaks käsitsemiseks
Kompaktne ja hästi tasakaalustatud konstruktsioon
Vastupidav ning professionaalseks kasutamiseks sobiv lahendus
Ühilduv GRAPHITE ENERGY+ akusüsteemiga
Kasutusvaldkonnad:
Metalli lõikamine ja lihvimine
Keevisõmbluste töötlemine
Rooste eemaldamine
Kivi- ja ehitusmaterjalide lõikamine
Üldised ehitus- ja remonditööd
Komplekti kuulub:
GRAPHITE ENERGY+ harjavaba akunurklihvija 58G026
Kolme asendiga külgkäepide
Märkus: Aku, laadija ning lõike- või lihvketas ei kuulu komplekti ning tuleb soetada eraldi.
