GRAPHITE elektritööriistad ja käsitööriistad Hammerjackis
Hammerjack on GRAPHITE toodete ametlik maaletooja. GRAPHITE on Euroopa tööriistabränd, mis pakub kvaliteetseid elektritööriistu, akutööriistu ja käsitööriistu ehitus-, remondi- ja paigaldustöödeks. Bränd keskendub töökindlatele lahendustele, mis ühendavad vastupidavuse, kasutusmugavuse ja suurepärase hinna ning kvaliteedi suhte.
Hammerjacki GRAPHITE valikust leiad akutrellid, lööktrellid, nurklihvijad, tikksaed, ketassaed, lihvijad, multifunktsionaalsed tööriistad, käsitööriistad ning laia valiku tarvikuid erinevateks ehitus- ja remonditöödeks.
Tööriistad nõudlikule kasutajale
GRAPHITE tööriistad on loodud pakkuma usaldusväärset jõudlust ja pikka kasutusiga. Kaasaegsed tehnilised lahendused, vastupidavad materjalid ja ergonoomiline disain aitavad saavutada täpseid tulemusi puidu, metalli, betooni ning teiste materjalide töötlemisel.
Miks valida GRAPHITE?
GRAPHITE toodete ametlik maaletooja.
Kvaliteetsed elektri- ja akutööriistad.
Lai valik käsitööriistu ja tarvikuid.
Vastupidavad ning ergonoomilised lahendused.
Suurepärane hinna ja kvaliteedi suhe.
Usaldusväärsed tööriistad igaks projektiks
GRAPHITE pakub töökindlaid lahendusi ehitajatele, paigaldajatele, hooldustehnikutele ja nõudlikele kodukasutajatele. Hammerjackist leiad laia valiku GRAPHITE originaaltooteid erinevateks ehitus-, remondi- ja paigaldustöödeks.
The GRAPHITE 57T501 plunge-cutting, BIM Co 8%, 44 mm blade 57T501 is a tool for multifunction machines with a blade width of 44 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 54mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.
Glass drill bit 6 mm 54T414 by GRAPHITE characterised by a diameter of 6 mm and an overall length of 70 mm. Equipped with a 4.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P240, 5 pieces, with 8 holes 58T296 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Jigsaw blade set, 6 TPI, 8 TPI, 10 TPI, 12 TPI, HCS, U-shaped handle, 5 pieces 57T520 by GRAPHITE includes 5 types of blades with different purposes and technical parameters. The set includes, among others, the 57T526 blade - made of high-speed steel (HSS), with a toothing density of 12 TPI, an overall length of 76 mm and a working length of 50 mm, designed for basic metal cutting, including medium-thick metal sheets with a thickness of 2.5-6 mm. Another is the 57T523 - an HCS blade with the same dimensions and toothing, created for cutting softwood (2-15 mm), plywood, chipboard, fibreboard and carpentry, ideal for curved cuts. Model 57T528 is a GRAPHITE brand HCS 6 TPI blade, with an overall length of 100 mm and a working length of 74 mm, designed for fast, coarse cutting of softwood (5-50 mm), plywood, fibreboard and particleboard. Also included is the 57T527 - HCS 8 TPI blade, with similar dimensions, for rough cutting of softwood (4-50 mm), chipboard, carpentry plywood and fibreboard. The last item is 57T525 - HCS 10 TPI, for clean cutting of wood (3-30 mm), chipboard, plywood, fibreboard and plastics and epoxy up to 30 mm in diameter. All GRAPHITE brand blades have a U-shaped handle and are suitable for most popular jigsaws.
Sanding canvas in roll 2.5 m x 115 mm, P220, 58T446 by GRAPHITE is an accessory for sanding metal, wood, plastic and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
The 56T725 bi-metal pilot drill bit by GRAPHITE is a drill bit with a diameter of 6.35 mm. It was made from high speed steel (HSS) using the deep grinding method. The GRAPHITE tool has a cylindrical shank and can be intended as an interchangeable part for the 56T753 and 56T754 adapters. Recommended for use for drilling in metal, stainless steel (Inox), aluminium, wood, cast iron and brass.
The 100 mm nylon wheel brush with 6 mm shank 57T427 by GRAPHITE is made of nylon. It has a maximum speed of 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6 mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE nylon brush is a versatile product for many tasks.
GRAPHITE's 14mm 56T730 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Water sandpaper 230 x 280 mm, P1000, 58T225 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Saw blade, widia, 140 x 30 mm, 24 teeth 57T206 by GRAPHITE, with an external diameter of 140 mm and a mounting hole diameter of 30 mm. It has 24 teeth, the cut width is 1.9 mm and the tooth angle is 15°. The maximum speed is 12,000 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Wood router bit with bearing, decorative, widia, 32 x 10 mm, shank 8 mm 56T612 by GRAPHITE is a router bit with unscrewable bearing, with a blade diameter of 32 mm, a height of 10 mm and an overall length of 50 mm. It also features an 8 mm shank length. The cutter blades are made of tungsten carbide (TCT), ensuring durability and precision. With its two cutting edges, it is ideal for making straight grooves, grooves and slots. Allows grooving of the edges of wood and wood-based materials, so will prove useful in carpentry and furniture work.
The 70 mm bi-metal hole saw 56T717 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 125 rpm, Inox steel - 60 rpm, aluminium - 185 rpm, wood - 160 rpm, cast iron - 80 rpm, brass - 160 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Velcro sanding discs 125 mm, P60, 5 pieces, unperforated 58T181 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P60 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Saw blade, widia, 300 x 30 mm, 40 teeth 57T232 by GRAPHITE, with an external diameter of 300 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.8 mm and the tooth angle is 15°. The maximum speed is 6,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
Jigsaw blade, 6 TPI, HCS, U-shaped handle, 2 pieces, curved cutting, fast cutting 57T522 by GRAPHITE is a jigsaw blade, with a tooth density of 6 TPI, made of HCS and with a U-shaped handle. The set includes 2 pieces. The overall length of the blade is 100 mm, working length 75 mm, width 6.7 mm, thickness 1.2 mm, tooth spacing 4 mm. Suitable for cutting softwood 5-50 mm thick, chipboard, plywood and fibreboard. The GRAPHITE blade allows you to work quickly and make curved cuts.
Velcro sanding discs 125 mm, P24, 5 pieces, unperforated 58T178 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P24 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Velcro sanding discs 125 mm, P24, 5 pieces, with 8 holes 58T286 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Sanding canvas in roll 2.5 m x 115 mm, P80, 58T442 by GRAPHITE is an accessory for sanding metal, wood, plastics and plasterboard. The product is made on the basis of J-type canvas, which is characterised by high flexibility and durability. The abrasive has a solid blank - 100% of the surface is covered with abrasive grain (electrocorundum), ensuring effective sanding. GRAPHITE brand canvas is designed for hand sanding.
