The GRAPHITE 57T301 solid diamond cutting wheel, 125 x 22.2 mm, wet 57T301 is a solid diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Grinding wheel, corundum for metal 125 x 6 x 22.2 mm, 27 A24-R-BF, convex 57T114 by GRAPHITE marked type 27 A24-R-BF is a convex tool, designed for grinding metal. It has a diameter of 125 mm, a thickness of 6 mm and a mounting hole of 22.2 mm. The maximum speed is 12,200 rpm - with a simultaneous working speed of 80 m/s. The product meets the requirements of EN 12413, ensuring safety and quality work. The GRAPHITE brand sanding disc will be suitable for metalworking, workshop applications.
GRAPHITE's 57T327 diamond grinding wheel, turbo, 125 x 22.2 mm, dry 57T327 is designed for dry use. Reduction rings are included. The disc has a diameter of 125 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 12,200 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone.The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.
GRAPHITE segmenteeritud teemantlõikeketas on mõeldud kuivlõikamiseks ning selle läbimõõt on 150 mm ja kinnitusava läbimõõt 22,2 mm. Komplekti kuulub praktiline reduktsioonirõngas, mis võimaldab ketast kasutada erinevate seadmetega.
Lõikesegment on 7 mm kõrge ja 2,2 mm lai. Ketta maksimaalne pöörlemiskiirus on 10 000 p/min, mis vastab perifeersele kiirusele 80 m/s.
Ketas vastab standardi EN 13236 nõuetele ning sobib järgmiste materjalide lõikamiseks:
graniit
betoon
tellis
kivi
marmor
Segmenteeritud konstruktsioon tagab tõhusa lõikamise ja hea jahutuse, mistõttu sobib ketas hästi nii professionaalseteks ehitus- kui ka remonditöödeks.
GRAPHITE's 57T324 diamond grinding wheel, 2 segments, 125 x 22,2 mm, dry 57T324 is equipped with two segments and designed for dry use. Reduction rings are included in the set. The segments are characterised by a height of 4.5 mm and a width of 8 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
GRAPHITE's 57T322 diamond grinding disc, 1 segment, 125 x 22.2 mm, dry 57T322 is equipped with one segment and designed for dry use. Reduction rings are included. The segment is characterised by a height of 4.5 mm and a width of 9.5 mm. The maximum speed of the GRAPHITE disc is 12,200 rpm, equivalent to 80 m/s. The disc is designed for grinding concrete, cellular concrete, brick and stone. The holes in this accessory improve cooling while working and effectively remove dust and abrasive material. This makes grinding faster and more efficient. The diamond-coated segments ensure effective and efficient sanding. They wear evenly, which also guarantees consistent work quality. The segmented design improves heat dissipation and prevents the disc from overheating. GRAPHITE's product meets the requirements of EN 13236.
Grinding discs 200 x 20/16/12.7 x 20 mm, P 60, 2 pieces 57T128 by GRAPHITE have an external diameter of 200 mm and a thickness of 20 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 3350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
Grinding wheel, corundum for metal 115 x 6 x 22.2 mm, 27 A24-R-BF, convex 57T113 by GRAPHITE marked type 27 A24-R-BF is a convex tool, designed for grinding metal. It has a diameter of 115 mm, a thickness of 6 mm and a mounting hole of 22.2 mm. The maximum speed is 13,300 rpm - with a simultaneous working speed of 80 m/s. The product meets the requirements of EN 12413, ensuring safety and quality work. The GRAPHITE brand sanding disc will be suitable for metalworking, workshop applications.
Turbo diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T321 by GRAPHITE is a dry and wet turbo diamond cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.8 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
Turbo diamond cutting wheel, 115 x 22.2 mm, dry 57T315 by GRAPHITE is a turbo dry cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The GRAPHITE 57T300 solid diamond cutting wheel, 115 x 22.2 mm, wet 57T300 is a solid diamond cutting wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Grinding discs 125 x 20/16/12.7 x 16 mm, P 60, 2 pieces 57T127 by GRAPHITE have an external diameter of 125 mm and a thickness of 16 mm. The set includes 2 pieces of accessories with a gradation of P 60. The inner diameter of the mounting hole is 12.7 mm, but reductions are included: from 20 to 16 mm and from 16 to 12.7 mm. GRAPHITE brand discs will work well for use on bench grinders. The maximum recommended speed for them is 5350 rpm. They are used for grinding metal, sharpening knives, chisels and other cutting tools, as well as machining and levelling metal surfaces.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry 57T313 by GRAPHITE is a segmented dry cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
Segmented diamond cutting wheel, 180 x 22.2 mm, dry and wet 57T311 by GRAPHITE is a segmented dry and wet cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
Segmented diamond cutting disc, 125 x 22.2 mm, dry and wet 57T308 by GRAPHITE is a segmented dry and wet cutting disc with a diameter of 125 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 12,200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
GRAPHITE's 57T304 solid diamond cutting wheel, 230 x 22.2 mm, wet 57T304 is a solid diamond cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.6 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
GRAPHITE's 57T326 diamond grinding wheel, turbo, 115 x 22.2 mm, dry 57T326 is designed for dry use. Reduction rings are included. The disc has a diameter of 115 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 13 600 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone. The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.
GRAPHITE turbo teemantlõikeketas on mõeldud kuivlõikamiseks ning selle läbimõõt on 150 mm ja kinnitusava läbimõõt 22,2 mm. Komplekti kuulub praktiline reduktsioonirõngas.
Lõikesegment on 7 mm kõrge ja 2,4 mm lai. Ketta maksimaalne pöörlemiskiirus on 10 000 p/min, mis vastab perifeersele kiirusele 80 m/s.
Ketas vastab standardi EN 13236 nõuetele ning sobib järgmiste materjalide lõikamiseks:
kivi
tellis
marmor
graniit
betoon
Tegemist on vastupidava ja tõhusa lõikekettaga professionaalseks ning nõudlikuks kasutamiseks ehitus- ja remonditöödel.
Segmented diamond cutting disc, 125 x 22.2 mm, dry 57T307 by GRAPHITE is a segmented dry cutting disc with a diameter of 125 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Segmented diamond cutting wheel, 180 x 25.4 mm, dry 57T312 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
