GRAPHITE's 57T326 diamond grinding wheel, turbo, 115 x 22.2 mm, dry 57T326 is designed for dry use. Reduction rings are included. The disc has a diameter of 115 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 13 600 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone. The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.
GRAPHITE turbo teemantlõikeketas on mõeldud kuivlõikamiseks ning selle läbimõõt on 150 mm ja kinnitusava läbimõõt 22,2 mm. Komplekti kuulub praktiline reduktsioonirõngas.
Lõikesegment on 7 mm kõrge ja 2,4 mm lai. Ketta maksimaalne pöörlemiskiirus on 10 000 p/min, mis vastab perifeersele kiirusele 80 m/s.
Ketas vastab standardi EN 13236 nõuetele ning sobib järgmiste materjalide lõikamiseks:
kivi
tellis
marmor
graniit
betoon
Tegemist on vastupidava ja tõhusa lõikekettaga professionaalseks ning nõudlikuks kasutamiseks ehitus- ja remonditöödel.
Segmented diamond cutting disc, 125 x 22.2 mm, dry 57T307 by GRAPHITE is a segmented dry cutting disc with a diameter of 125 mm and a mounting hole of 22.2 mm. The cutting segment is 7 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting granite, concrete, brick, stone and marble.
Segmented diamond cutting wheel, 180 x 25.4 mm, dry 57T312 by GRAPHITE is a segmented dry cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
Mandrel, shank for mini grinder GRAPHITE (ref. 55H074) in diameter 3.2 mm. Set contains 2 pcs. Designed to work with other accessories dedicated to the mini grinder.
VERTO minidrill accessories VERTO (ref. no. 50G029), set of 100 pcs includes drills, cutting and grinding discs, mills and grinding stones for use with minigrinders. Convenient, wooden box allows to easily store all pieces in the set. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Set of accessories for mini drill (ref. 55H082), set contains 52 pcs. grinding tools. They are intended for use with a mini-grinder. They are suitable for sharpening, smoothing, deburring and general grinding of most materials. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic.
Set of accessories for mini drill GRAPHITE (ref. 55H078), set contains 15 pcs. polishing tools. They are intended for use with a mini-grinder. It is suitable for polishing, smoothing and grinding most materials. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic.
Accessories for mini drill VERTO (ref. 50G027), set 30 pcs. Contains diamond cutters of various types. They are suitable for precise work in crafts, modeling or car cosmetics. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic. Convenient and compact case allows you to easily store all the elements of the set.
Set of accessories for mini drill GRAPHITE (ref. 55H080), set contains 12 pcs. polishing tools. They are intended for use with a mini-grinder. It is suitable for polishing, smoothing and grinding most materials. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic.
Mounted point GRAPHITE (ref. 55H052) in shape of cylindrical in diameter 10 mm and length 12 mm. Set contains 3 pcs. They are intended for use with a mini-grinder. The mounted point is made of aluminum oxide. Suitable for sharpening, smoothing, deburring and general grinding of most materials. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic.
Sanding bands GRAPHITE (ref. 55H077) in diameter 12.7 mm and gradations: K60, K80, K120 and K240. Przeznaczone do stosowania z miniszlifierką. Suitable for grinding, shaping and preparation of surfaces made of metal,ceramics, tiles, stone, glass, plastics and fiberglass.
Sanding bands GRAPHITE (ref. 55H069) it's a set 10 pieces of belts for the mini sander in diameter 6.3 mm and gradation K60 and K120. Suitable for grinding, shaping and preparation of surfaces made of metal,alloys, ceramics, plates, stone, glass, plastics and fiberglass. It can also remove rust and cut surfaces.
Mounted point GRAPHITE (ref. 55H056) in shape of bullet in diameter 6 mm and length 10 mm. Set contains 3 pcs. They are intended for use with a mini-grinder. The mounted point is made of aluminum oxide. Suitable for sharpening, smoothing, deburring and general grinding of most materials. They can be used for processing: metals, castings, welded joints, rivets, removing rust, ceramics, glass, wood, plastic.
