Metallitööpingid

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

FSM 70200 tööstuslik täppistasapinnalihvpink NC-juhitava vertikaalsöötmega. Magnetlaud 2000 × 700 mm, kandevõime kuni 1700 kg, AD5 automaatne etteandekontroll ja spindli täpsus 2 μm suurte detailide professionaalseks lihvimiseks.

Tehnilised andmed:

• Magnetlaua mõõdud: 2000 × 700 mm
• Maksimaalne töödeldava detaili kaal: 1700 kg
• Maksimaalne kaugus spindli ja laua vahel: 600 mm
• X-telje käik: 2150 mm
• Z-telje käik: 760 mm
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Lihvketta mõõdud: Ø 405 × 50 × 127 mm
• Spindli kiirus: 1450 p/min
• Peamootori võimsus: 7,46 kW
• Hüdraulikapumba võimsus: 3,73 kW
• Toide: 400 V / 50 Hz / 3~
• Mõõtmed (P × L × K): 6000 × 2550 × 2040 mm
• Netokaal: 9000 kg
• Spindli jooksutäpsus: 2 μm
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtsüsteem: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 70200
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Tasakaalustusvarras
• Lihvketas
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

Omadused:

• NC-juhitav vertikaalsööde suure täpsuse saavutamiseks
• Automaatne etteandekontroll AD5
• Programmeeritavad lihvimistsüklid
• Tugev pingevabastatud ja karastatud malmkonstruktsioon
• Elektromagnetiline magnetlaud automaatse demagnetiseerimisega
• Turcite-B kattega käsitsi kraabitud V-juhikud
• Automaatne tsentraalmäärimine kõikidele juhikutele ja spindlitele
• Täppisspindel koonusrull-laagritega
• Spindli jooksutäpsus kuni 2 μm
• Sobib väga suurte ja raskete tööstusdetailide täppislihvimiseks

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Tehnilised andmed:

• Mootori võimsus: 1,5 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Pöörlemiskiirus: 2850 p/min
• Lihvketta läbimõõt: 250 mm
• Lihvketta laius: 40 mm
• Lihvketta ava läbimõõt: 32 mm
• Traatharja läbimõõt: 250 mm
• Traatharja laius: 30 mm
• Mõõdud (P × L × K): 526 × 380 × 319 mm
• Netokaal: 32,5 kg
• Brutokaal: 33,4 kg

Traatharja omadused:

• Kõrgtugevast terastraadist universaalhari
• Saadaval erineva traadijämedusega harjad lisavarustusena

Omadused:

• Kahetulbaline konstruktsioon täismaterjali ja profiilide lõikamiseks.
• Siemens S7-1500 juhtsüsteem suure 7" puuteekraaniga.
• Standardne materjali etteanne kuni 700 mm.
• Lõikeliikumine kuulkruvi ja servomootori abil.
• ARP automaatne lõikeetteande juhtimine vastavalt materjali takistusele.
• Tugev masinaehitus ja minimaalsed vahed saelindi, juhikute ning tooriku vahel vähendavad vibratsiooni.
• Sujuvalt reguleeritav lõikekiirus.
• Saelindi ajam koonusülekande, asünkroonmootori ja sagedusmuunduri abil.
• Kaheosaline kruustang fikseerib materjali enne ja pärast lõiget.
• Hüdraulilise kruustangi surve reguleerimine manomeetriga juhtventiili kaudu.
• 7° kaldega saelint ja hüdrauliline saelindi pingutus pikendavad saelindi tööiga.
• Eesmine saelindijuhik liigub automaatselt paralleelselt kruustangi lõuaga.
• Elektriliselt käitatav laastueemaldushari.
• Emulsioonjahutus saelindijuhikutes ja lõiketsoonis.
• Automaatne materjali etteanne servomootori ja kuulkruvi abil.
• Optiline andur tuvastab materjali lõppemise ja peatab etteande.
• Standardvarustuses laastukonveier ja laastukonteiner.
• Saelindijuhikud integreeritud jahutussüsteemiga.

• For deburring flat components e.g. after plasma cutting or punching
• Conveyor table with profile conveyor belt for optimum hold during processing

• For deburring flat components, e.g. after plasma or laser cutting or punching
• Edge rounding up to 2 mm possible
• Components adhere to the non-slip conveyor belt due to vacuum, thus also good adhesion with small parts
• Large working width of 1350mm
• Infinitely variable conveyor belt speed
• Operation via 8" touch screen

• Heavy, solid cast construction
• Dirt and water resistant, easy to clean membrane keypad
• Electronics 24V DC
• Electrical quill feed
• Depth stop
• Threading attachment
• Machine light integrated in the drill head
• Large, height-adjustable protective screen with safety switch for maximum protection of the user
• Large dimensioned, solid drill table, precisely worked with parallel T-slots and circumferential cooling water channel, strongly ribbed on the back, tiltable ± 90 ° sideways
• Motorized rotary table height adjustment
• Coolant system and external coolant tank can be removed for easy and complete emptying
• Chip filter according to Machinery Directive
• Extremely stable, thick-walled cast-iron column for high power consumption
• Solid base plate with parallel T-slots, precision surface finish
• Optional foot switch for switching between clockwise and anticlockwise rotation and for thread cutting

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Maksimaalne puurimisvõime terases (S235JR): 24 mm.
• Mootori võimsus: 850 W (0,85 kW).
• Toitepinge: 230 V.
• Pöörlemiskiirus: 350-4000 p/min.
• Kiiruste arv: 7 astet.
• Pinooli käik: 85 mm.
• Spindlikoonus: MK2.
• Ulatus (reach): 165 mm.
• Töölaua mõõtmed: 280 × 300 mm.
• Sambadiameeter: 80 mm.
• Mõõtmed (P × L × K): 665 × 434 × 998 mm.
• Kaal: 92 kg.

Komplekti kuulub:

• Kiirkinnituspuurpadrun 1-16 mm.
• Morse koonus MK2.
• T-soonemutrid

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Stop track with length stop, manual measuring system with mm scale and reading magnifier
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• Maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: Sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

Tehnilised andmed:

• Mootori võimsus: 1,1 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 1450 p/min
• Lihvketta läbimõõt: 305 mm
• Lihvimisüksuse kallutusvahemik: 0–45°
• Töölaua mõõtmed: 440 × 210 mm
• Nurgajuhiku reguleerimisvahemik: 180°
• Tolmuärastusava läbimõõt: 50 mm
• Mõõtmed (P × L × K): 560 × 440 × 380 mm
• Netokaal: 24,9 kg
• Brutokaal: 31,4 kg

Hooldusvaba tööstusmootor

Tasakaalustatud rootor kvaliteetsete kuullaagritega

Kaalutud alumiiniumist lihvketas sujuvaks tööks

Komplektis takjakinnitusega lihvleht

Sobib jäme-, peen- ja kontuurlihvimiseks

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Grinding belt change in seconds due to the quick-tensioning system
• Easy adjustment of the belt run
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Infinitely tiltable sanding unit
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Quick sanding belt change in seconds thanks to quick-release system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Continuous sanding surface after removal of attachments enables sanding of long workpieces too
• Can be used with and without extraction
• One extraction nozzle on the spark box and one on the rear belt roller
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective disk
• MBSM 75-240-2 and 150-240-2 models with two belt speeds for sanding steel and stainless steel

• For sanding surfaces, edges and rounding off
• Heavy, durable industrial design with maintenance-free motor
• Long service life and smooth running thanks to balanced rotor with quality ball bearings
• Large surface sanding area thanks to fold-away upper sanding belt cover
• One extraction nozzle on the spark box and one on the rear belt roller
• Quick sanding belt change thanks to quick-release system
• Includes practical storage surface, e.g. for safety goggles