Metallitööpingid

FSM 2045 on kompaktne ja täpne tasapinnalihvpink professionaalseks metallitöötluseks. NC-juhitav vertikaalsööde, elektromagnetiline magnetlaud ning automaatne etteandekontroll tagavad kvaliteetse pinnaviimistluse ja suure töötlemistäpsuse tööriistade, vormide ning täppiskomponentide valmistamisel.

Tehnilised andmed:

• Magnetlaua mõõdud: 450 × 200 mm
• Maksimaalne töödeldava detaili kaal: 150 kg
• Lihvketta mõõdud: Ø 180 × 13 × 31,75 mm
• Spindli kiirus: 2900 p/min
• Spindlimootori võimsus: 1,5 kW
• Toide: 400 V / 50 Hz
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Mõõtmed (P × L × K): 2080 × 1200 × 1800 mm
• Netokaal: 950 kg
• Spindli jooksutäpsus: 2 μm
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtimine: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 2045
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Tasakaalustusvarras
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy, stable construction
< li>Exact angle adjustment via two handwheels
• punching station with 12 tons of punching pressure on the back

• User-friendly and energy-saving thanks to the hydraulic drive
• Heavy, stable construction
• Solid table with recessed scales and T-slots for precise adjustment of the swiveling stops
• Exact angle adjustment Via two handwheels
• Finger protection cover made of plexiglass for an optimal view of the cutting edge
• Punching station with 12 tons of punching pressure on the back
• Operation via pedal
• Delivered with hydraulic oil

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

OPTIsaw SP 13V on kompaktne ja täpne kaasaskantav metallilintsaag, mis sobib profiilide, torude ja täismaterjali lõikamiseks töökojas või paigaldustöödel. Madala mürataseme, sujuvalt reguleeritava lõikekiiruse ning kuni 60° pööratava saepoogna tõttu on seade ideaalne lahendus nurklõigete tegemiseks. Komplektis olev kvaliteetne bimetallsaelint võimaldab tööd alustada kohe pärast seadme paigaldamist.

Tehnilised andmed:

• Mootori võimsus: 1,0 kW
• Toitepinge: 230 V / 50 Hz
• Saelindi kiirus: 30–80 m/min
• Saelindi mõõt: 1440 × 13 × 0,65 mm
• Lõikenurk: 0° kuni +60°
• Lõikevõime 90° ümarmaterjal: Ø125 mm
• Lõikevõime 90° nelikant: 125 × 125 mm
• Lõikevõime 45° ümarmaterjal: Ø65 mm
• Lõikevõime 45° ristkülikmaterjal: 60 × 65 mm
• Lõikevõime 60° ristkülikmaterjal: 45 × 50 mm
• Mõõtmed: 720 × 300 × 680 mm (avatud asendis)
• Kaal: 19,5 kg

Komplekti kuulub:

• Bimetallsaelint
• Reguleeritav materjalipiirik

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• For punching out corners, shapes, etc.
• Robust construction made of high quality grey cast iron
• Adjustable stops allow comfortable work and repeatability of the notching process
• Scale on the lower cutting edge

Tehnilised andmed:

• Puurimisvõimsus terases (S235JR): 20 mm.
• Pidev puurimisvõimsus terases (S235JR): 16 mm.
• Maksimaalne freespea läbimõõt: 52 mm.
• Maksimaalne otsfreesi läbimõõt: 12 mm.
• Mootori võimsus: 0,95 kW.
• Toitepinge: 230 V / 50 Hz.
• Pöörlemiskiirus: 90-3000 p/min.
• Kiiruste arv: 2 käiguastet, elektrooniline kiiruse reguleerimine.
• Tööriistahoidik: BT20.
• Spindli käik: 40 mm.
• Spindli väljaulatus: 170 mm.
• Laua mõõtmed: 700 × 180 mm.
• T-soonte mõõt: 12 mm.
• T-soonte arv: 3.
• T-soonte vahe: 63 mm.
• Laua kandevõime: 50 kg.
• X-telje käik: 480 mm.
• Y-telje käik: 175 mm.
• Z-telje käik: 270 mm.
• Maksimaalne kaugus spindlist lauani: 360 mm.
• Freesipea kallutus: ±60°.
• Mõõtmed (P × L × K): 745 × 650 × 950 mm.
• Kaal: 120 kg.

Komplekti kuulub:

• Kasutustööriistad

• for cutting metal, paper, plastic and other materials
• with miter stop in front
• hardened knife
• Backgauge with scale

• 10-year OPTIMUM warranty
• Suitable for intensive use in industry
• Heavy industrial grinding machine absorbs the already low vibrations due to high dead weight
• Suitable even with very strong shear forces on the grinding wheels
• Maintenance-free, long-lasting induction motor with smooth running
• Cast iron housing
• Spark protection
• Stable, movable workpiece support
• Grinding wheels not included in the standard scope of delivery

• Sanding belt change in seconds due to the quick-tensioning system
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-supported belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model
• Model MBSM 100-140-2 with two belt speeds - for sanding steel and stainless steel

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

Tehnilised andmed:

• Mootori võimsus: 0,45 kW (450 W)
• Toitepinge: 230 V
• Pöörlemiskiirus: 2850 p/min
• Lihvketta läbimõõt: 175 mm
• Lihvketta laius: 25 mm
• Netokaal: 12,3 kg
• Brutokaal: 13,9 kg

Traatharja omadused:

• Kõrgtugevast terastraadist universaalhari
• Saadaval erineva traadijämedusega harjad lisavarustusena

• Integrated extraction system
• For deburring with practical workpiece support and spark box
• Convenient operation thanks to easily adjustable clamping device
• The rotating clamping jaws of the clamping device enable secure clamping of square tubes, round tubes and flat steel
• Adjustable grinding angle from 30 - 90° and from 0° - 60
• The front contact roller can be replaced quickly and easily without tools thanks to the optimized quick-change holder
• Particularly durable thanks to larger and improved roller bearings
• Practical contact roller holders integrated in the base frame
• Extensive range of contact rollers for various pipe diameters available as accessories
• Quick changeover between pipe grinding and belt grinding possible
• Powerful motor
• Almost all settings can be made without tools (operating tool included in the scope of delivery)
• Large, foldable protective screen with optimum field of vision
• Two belt speeds for optimum adaptation to the respective material (15 m/s ideal for stainless steel and aluminum, 30 m/s perfect for steel)
• With two easily removable spark boxes