Metallitööpingid

Tehnilised andmed:

• Puurimisvõimsus terases: 13 mm
• Pöörete vahemik: 620–2620 p/min
• Kiiruste arv: 5
• Spindli kinnitus: B16
• Spindli viskumistäpsus: ≤ 0,02 mm
• Kolonni läbimõõt: 46 mm
• Töölaua pöördenurk: 360°
• Töölaua kallutus: +45° kuni -45°
• Maksimaalne kaugus spindlist töölauani: 220 mm
• Maksimaalne kaugus spindlist alusplaadini: 300 mm
• Mõõdud (P × L): 460 × 340 mm
• Netokaal: 15 kg
• Brutokaal: 17,1 kg
• Täppiskuullaagritel puurspindel
• Hammasvõtmega puurpadrun kindlaks kinnitamiseks
• Suur kõrgusreguleeritav puurpadruni kaitsekate

• Smooth and powerful electric motor
• Two speed levels
• Forward / reverse operation
• V-belt cover with safety switch
• Digital speed indicator integrated in the housing
• Concentricity guaranteed less than 0.015 mm measured in quill
• Height-adjustable feed guard with microswitch for the utmost protection of the user
• Machine light integrated in the drill head
• Drill spindle with precision ball bearing
• High quality keyless chuck as standard
• Precision machined drilling table with diagonally running T-slots, 360 ° rotatable with circulating cooling water channel
• Thick-walled cast-iron column for high power absorption and stability
• Massive base plate, large dimensions heavily ribbed on the back
• Base plate usable by pivoting away the drilling table as a work surface for particularly high workpieces

• Easy tool change through integrated expeller
• Quillons made of steel

• Digital depth gauge
• Countershaft transmission allows a much higher torque

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Suitable for cutting metals, cardboard and other materials.
• Extremely stable and robust construction made of cast iron
• Bronze bearing blades made of cold work steel K2379
• Hardened, resharpenable and adjustable knives

• Suitable for cutting metals, cardboard and other materials
• Extremely stable and robust construction made of cast iron
• Bronze-plated knives made of cold-work steel K2379
• Hardened, regrindable and adjustable knives
• motor
• engine brake
• Cutting speed 7.5 m/min
• Central lubrication
• Inner diameter-cutting system
• Mobile control panel with foot pedal

• Including chuck key

Tehnilised andmed:

• Magnetlaua mõõdud: 1500 × 600 mm
• Maksimaalne töödeldava detaili kaal: kuni 1000 kg
• Maksimaalne kaugus spindli ja laua vahel: 600 mm
• Lihvketta mõõdud: Ø 405 × 50 × 127 mm
• Spindli kiirus: 1450 p/min
• Spindli jooksutäpsus: 2 μm
• Peamootori võimsus: 7,46 kW
• Hüdraulikapumba võimsus: 2,24 kW
• Laua liikumiskiirus (X-telg): 5 kuni 25 m/min
• Toide: 400 V / 50 Hz
• Minimaalne etteandesamm: kuni 0,001 mm
• Juhtsüsteem: AD5 automaatne etteandekontroll

Komplekti sisu:

• Täppistasapinnalihvpink FSM 60150
• Elektromagnetiline magnetlaud
• Automaatne demagnetiseerimisseade
• Jahutusseade
• Automaatne tsentraalmäärimissüsteem
• Halogeen töövalgusti (IP65)
• Tasakaalustusvarras
• Lihvketas
• Lisalihvketta flants
• Kasutustööriistad
• Kasutusjuhend

Omadused:

• NC-juhitav vertikaalsööde suure täpsuse saavutamiseks
• Automaatne etteandekontroll AD5
• Programmeeritavad lihvimistsüklid
• Elektromagnetiline magnetlaud automaatse demagnetiseerimisega
• Pingevabastatud ja karastatud malmkonstruktsioon
• Turcite-B kattega V-tüüpi juhikud sujuvaks ja täpseks liikumiseks
• Automaatne keskmäärimine kõikidele juhikutele ja spindlitele
• Täppisspindel koonusrull-laagritega
• Sobib suurte ja raskete detailide täppislihvimiseks tööstuslikus tootmises

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Feed roller conveyor without length stop and without measuring system
• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• standard design
• Quality Made in Germany

• Smooth and powerful brushless drive
• Separate emergency stop impact switch
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Long, ergonomic aluminum die-cast quill lever
  One piece cast (B 24HV with softgrip handles)
• Measurement scale for drilling depth
• Belt cover with safety switch
• Forward / reverse operation
• Machine light

• Quillons made of steel
• Coolant system
• Chip filter according to the Machinery Directive
• Easy tool change through integrated expeller

• Quill stroke 160 mm
• Tapping function
• Digital depth gauge

• Operating mode "auto"
  • Engine starts automatically after lever movement
  • Stops again in the starting position
  • Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
• Operating mode "tapping"
  • Engine is activated by moving the handle down
  • The direction of rotation is changed by limit switches on the adjustable drilling depth stop

• Especially quiet running
• High performance
• Approximately constant torque over the entire speed range

• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver

• integrated in the housing

• by means of potentiometer

• Guaranteed ; 0.015 mm measured in the quill

• Precision ball bearings
• High quality OPTIMUM keyless chuck as standard

• Integrated in the drill head
• Halogen lamp

• Precisely worked
• Diagonal T-slots
• 360° rotatable
• Circulating cooling water channel

• Solid
• Large dimensions
• Heavily ribbed on the reverse side

• Thick-walled
• High power and stability

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• LED lighting above the grinding wheels for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• Integrated spark guard on the grinding wheels reduces flying sparks
• Protective discs made of shatterproof material for additional safety
• Non-slip and vibration-damping rubber feet for a stable stand
• Standard equipment with coarse and fine sanding discs (grit 36 and 80)
• LED lighting above the sanding discs for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Best power transmission thanks to aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver
• Guaranteed concentricity of less than 0.015 mm measured in the drill sleeve
• High-quality OPTIMUM quick-action drill chuck as standard
• Drilling depth stop
• V-belt tensioning device
• Right/left rotation

• Powerful brushless drive with particularly smooth running and high performance with almost constant torque over the entire speed range
• Best power transmission thanks to aluminum pulleys in conjunction with toothed GATES quality V-belt
• Very smooth running thanks to ground multi-tooth driver
• Guaranteed concentricity of less than 0.015 mm measured in the drill sleeve
• Separate emergency stop switch
• High-quality OPTIMUM quick-action drill chuck as standard
• Large, height-adjustable protective screen with safety switch for maximum user protection
• Drilling depth stop
• V-belt cover with safety switch
• V-belt tensioning device
• Right/left rotation
• Machine light integrated in the drill head
• Precisely machined, stable drill table with 2 diagonal T-slots, 360° rotatable and all-round cooling water channel
• Thick-walled cast column for high force absorption and stability
• Solid base plate, large dimensions and heavily ribbed on the back

• High quality steel knives with a hardness of HRC52-HRC58
• Equipped with two control handles
• Front bearing surface with scale
• Up to 500 mm adjustable backgauge

Tehnilised andmed:

• Maksimaalne lõikevõime ümarmaterjalile 0°: 700 mm.
• Maksimaalne lõikevõime täismaterjalile 0°: 700 mm.
• Maksimaalne lõikevõime ristkülikprofiilile 0°: 750 × 700 mm.
• Kimpmaterjali lõikevõime: 750 × 460 mm.
• Mootori võimsus: 11 kW.
• Toitepinge: 400 V / 50 Hz.
• Saelindi kiirus: 15-80 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi mõõtmed: 7680 × 67 × 1,6 mm.
• Materjali etteandelaua kõrgus: 620 mm.
• Mõõtmed (P × L × K): 5550 × 2670 × 3050 mm.
• Kaal: 5950 kg.

Komplekti kuulub:

• Saelint.
• Kasutustööriistad.
• Tööala valgustus.
• Mootoriga laastueemaldushari.
• Sagedusmuundur.
• Jahutuspump.
• Hüdrauliline saelindi pingutusseade.

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened