Metallitööpingid

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• heavy and stable cast iron construction
• asymmetric 3-roller system for easy pre-bending
• swing-out top roller
• Roller drive via hand crank
• suitable for bending wires with the diameters 3, 5 and 8 mm
• quick clamping of the sheet metal by means of a lever

• Note: Please specify when ordering material to be processed!

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Tehnilised andmed:

• Keskmekõrgus: 135 mm
• Maksimaalne lihvimispikkus: 500 mm
• Töölaua käik: 640 mm
• Välislihvimise läbimõõt: Ø 8–200 mm
• Siselihvimise läbimõõt: Ø 25–100 mm
• Siselihvimise sügavus: 125 mm
• Tooriku maksimaalne kaal tsentrite vahel: 50 kg
• Töölaua pöördenurk: +3° / -9°
• Spindlipea pöördenurk: 0° kuni 45°
• Töövõlli kiirus: 25–380 p/min
• Spindlikoonus: MT4
• Tagapuki koonus: MT4
• Käsiratta liikumine pöörde kohta: 1 mm
• Käsiratta jaotise väärtus: 0,005 mm
• Suli käik: 25 mm
• Mootori võimsus: 4,0 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mõõdud (P × L × K): 2250 × 1600 × 1500 mm
• Netokaal: 2200 kg

• For use in the metalworking industry for grinding, structuring and polishing tasks, especially in the stainless steel sector
• 225 mm balanced belt rollers ensure optimum and low-vibration drive
• Infinitely variable belt speed of 4.5 - 27 m/s thanks to frequency shaper
• With electric table height adjustment
• With split table that can be opened, drawer sanding unit and integrated work table lighting
• Smooth-running sanding table even under load
• Easy adjustment of the sanding belt
• Profile roller sanding pad, resulting in less tarnishing during the sanding process
• Right/left rotation as standard

• Modern design in stable steel construction
• High design flexibility thanks to segmented edging rail with removable segment pieces
• Operation via two laterally arranged, large, adjustable and easy-to-operate lever arms
• Scissor table with inserted measuring tapes and right-angled stop on both sides
• Easily adjustable top, rear and bottom roller
• Long contact surface
• Adjustable backgauge and extendable front material support for the safe placement of even large format sheets

• Adjustment screws for the material thickness with scaling
• Ground bending rolls with wire-laying grooves on the lower and front rolls

• High quality folding cheeks
• Feather-down device
• Segment split edge rail 40/50/65/100/180/255/380 mm for cassette bending

• Clean and burr-free cutting by upper and lower blades made of quality steel

Tehnilised andmed:

• Mootori võimsus: 0,55 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Puurimisvõimsus terases (S235JR): 20 mm
• Pidev puurimisvõimsus terases (S235JR): 16 mm
• Pöörete vahemik: 300–2300 p/min
• Käikude arv: 12
• Spindli koonus: MK2 (MT2)
• Kiirpingutatav puurpadrun: 1–16 mm
• Kolonni läbimõõt: 70 mm
• Töölaua mõõtmed: 270 × 270 mm
• T-soonte arv: 2
• T-soonte mõõt: 14 mm
• Töölaua pöördenurk: 360°
• Töölaua kallutus: ±45°
• Töölaua kandevõime: 15 kg
• Maksimaalne kaugus spindlist töölauani: 460 mm
• Mõõdud (P × L × K): 700 × 351 × 1006 mm
• Netokaal: 41,7 kg
• Brutokaal: 45 kg
• Spindli viskumistäpsus: < 0,03 mm
• Ohutuspinge juhtimisahelas: 24 V DC
• Parem- ja vasakkäik

Komplekti kuulub kiirpingutatav puurpadrun, koonusadapter MK2/B16 ja T-mutrid.

Tehnilised andmed:

• Mootori võimsus: 0,25 kW
• Toitepinge: 230 V
• Sagedus: 50 Hz
• Kuivlihvketta läbimõõt: 150 mm
• Kuivlihvketta laius: 20 mm
• Kuivlihvketta ava läbimõõt: 12,7 mm
• Märglihvkivi läbimõõt: 150 mm
• Märglihvkivi laius: 40 mm
• Märglihvkivi ava läbimõõt: 20 mm
• Pöörlemiskiirus: 2980 p/min
• Kaal: 8,2 kg

Komplekti kuulub:

• Kuivlihvketas K36
• Kuivlihvketas K60

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

MTBS 3130-40 T professionaalsed NC-juhitav giljotiin suureformaadilise lehtmetalli lõikamiseks. Töölaius 3050 mm, lõikevõime kuni 4 mm terasel, pneumaatiline lehetoestus, digitaalne tagapiirik ning automaatne materjali väljastus maksimaalse tootlikkuse tagamiseks.

Tehnilised andmed:

• Töölaius: 3050 mm
• Maksimaalne lõikevõime terasel (400 N/mm²): 4,0 mm
• Maksimaalne lõikevõime terasel (450 N/mm²): 4,0 mm
• Maksimaalne lõikevõime roostevabal terasel (700 N/mm²): 2,5 mm
• Lõigete arv minutis: 38
• Lõikenurk: 1,5°
• Tagapiiriku reguleerimisulatus: kuni 750 mm
• Tagapiiriku kiirus: 28 mm/s
• Tagapiiriku mootor: 0,37 kW
• Lõikevahe reguleerimine: 0,05–0,4 mm
• Mootori nimivõimsus: 7,5 kW
• Sisendvõimsus: 8,45 kW
• Koguvõimsus: 9 kW
• Toitepinge: 400 V / 50 Hz
• Õhukulu tsükli kohta: 13 l
• Lehetoestuste arv: 3
• Mõõtmed (P × L × K): 3760 × 2360 × 1280 mm
• Netokaal: ligikaudu 3600 kg
• Täht-kolmnurk käivitus: jah
• Roostevabast terasest töölauakate: jah

Komplekti sisu:

• MTBS 3130-40 T giljotiin
• NC-juhitav tagapiirik Maper HT071 digitaalnäiduga
• Pneumaatiline lehetoestus
• Esi- ja tagasuunaline materjali väljastussüsteem
• 1000 mm külgpiirik mõõteskaala ja T-soonega
• Kolm lehetoestust T-soontega
• Roostevabast terasest töölauakate koos ülekandekuulidega
• LED-lõikeala valgustus
• Täppisreguleeritav lõikevahe
• Mobiilne jalapedaal koos hädaseiskamisnupuga
• Pidev sõrmekaitsesüsteem
• Roostevaba terase lõikamiseks sobivad kvaliteetsed lõiketerad

• No running of the drawing knife during cutting due to three-sided ball bearing guide on the upper side of the knife
• Table feed is manual via large hand lever
• Convenient workpiece change due to backward tiltable tool arm
• Perpendicular angle of the drawing knife to the workpiece can be finely readjusted via rotary wheel

• Grooves are drawn in vertical direction. This has advantages over grooving: Higher accuracy, better surface finish and higher cutting speed
• Quicker and easier tool change
• No running of the drawing knife during cutting due to three-sided ball bearing guide on the upper side of the knife
• Perpendicular angle of the drawing knife to the workpiece can be finely readjusted via rotary wheel
• Table feed is manual via large hand lever
• Extremely robust and low-maintenance construction
• Convenient workpiece change due to backward tiltable tool arm
• Dividing plate with different angular pitches (available as accessory) enables precise and fast clamping and reclamping of the workpieces

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

Tehnilised andmed:

• Maksimaalne töölaius: 660 mm
• Maksimaalne lehe paksus: 2,0 mm
• Alumiiniumi painutusvõime: 2,0 mm
• Maksimaalne painutusnurk: 135°
• Mõõdud (P × L × K): 880 × 500 × 970 mm
• Maksimaalne laius/sügavus: 570 mm
• Netokaal: 56 kg
• Brutokaal: 45 kg
• Detaili kinnitamine toimub käsitsi klambrite abil
• Lihtne painutusnurga fikseerimine tagab suure kordustäpsuse
• Isemäärduvad liuglaagrid

Tehnilised andmed:

• Mootori võimsus: 0,6 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Pöörlemiskiirus: 2850 p/min
• Lihvketta läbimõõt: 200 mm
• Lihvketta laius: 30 mm
• Lihvketta ava läbimõõt: 32 mm
• Lihvlindi mõõt: 75 × 762 mm
• Lihvlindi seadme pöördenurk: 90°
• Tolmuärastusotsiku läbimõõt: 32 mm
• Lihvtoe mõõt: 180 × 87 mm
• Mõõdud (P × L × K): 501 × 261 × 459 mm
• Netokaal: 20,7 kg
• Brutokaal: 24 kg

Komplekti kuulub:

• Korund-lihvkivi K80
• Korund-lihvlint K80

Arguments convincing in quality, performance and price

• Time-saving deburring of edges and polishing of weld seams
• Stable and vibration-free construction
• Powerful engine
• Grinding table can be tilted by 22° - 50°
• Continuously adjustable stop at the top enables quick and easy grinding of the workpieces
• Large surface grinding area
• Additional safety device
• Extraction nozzle at the front for connecting a suction device
• Spark protection
• Workpiece support enables grinding at the right angle
• One sanding belt in the standard scope of delivery

• High working capacity due to processing with two sanding belts and a further sanding unit for selective processing
• Infinitely variable speed control
• Motorized table height adjustment

• High working capacity due to processing with two sanding belts and an additional disc sanding unit with a diameter of 150 mm for spot processing e.g. polishing of weld seams
• One sanding shoe with large grooved pressure roller, thus less heat development and less tarnishing
• Optionally available: Contact roller device with large grooved pressure roller for less heat generation and less tarnish
• Infinitely variable speed control
• Motorized table height adjustment
• The special design with raised deflector (triangular shape) results in a large free working area in which work can be carried out without danger
• Optionally available with pneumatic workpiece clamping for thick or thin workpieces

• Magnetlaua mõõtmed: 300 × 600 mm
• Lihvketta mõõtmed: Ø 350 × 40 × 127 mm
• Spindli pöörlemiskiirus: 1450 p/min
• Lihvimistäpsus: 0,005 mm
• X-telje hüdrauliline etteandekiirus: 5–25 m/min
• Maksimaalne kaugus spindli ja laua vahel: 580 mm
• Mootori võimsus: 4,0 kW
• Koguvõimsus: 6,5 kW
• Toitepinge: 400 V / 50 Hz
• Jahutuspaagi maht: 100 l
• Masina mõõtmed (P × L × K): 3200 × 2200 × 2100 mm
• Kaal: 3000 kg

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany