Metallitööpingid

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

Equipment details:

FSBM 1270-20 E

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

FSBM 1020-20 S2

• With segmented sharpening tools, segmented bending strip and continuous bed support

FSBM 1020-20 HSG

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

Note on technical data:

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• P version with two pneumatic auxiliary cylinders and foot switch
• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Foot operation leaves both hands free for material feed
• Large viewing window made of Plexiglas
• High-quality steel blade
• Baffle guide
• Simple adjustment of the cutting blade via eight screws
• Angle-adjustable side stop with millimeter scale
• Maximum distance from finger guard to work table is 5 mm, ensuring maximum safety
• Cutting line lighting as standard

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Available on request

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

Quality Made in Europe
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy industrial combination grinding machine absorbs the low vibrations due to its high weight
• Also suitable for very strong pushing forces on the grinding wheel and brush
• Maintenance-free, durable induction motor with smooth running
• Housing made of cast iron
• Stable, adjustable workpiece support
• Grinding wheel and brush not included in the standard delivery

Multipurpose wire brush

• High strength steel wire available in accessories in various thicknesses

Brush Housing

• swiveling
• Extraction nozzle for connecting a suction device

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Restless and powerful brushless drive
• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver
• Concentricity guaranteed less than 0.015 mm measured in Bohrpinole
• Drill spindle with precision ball bearing
• Membrane keyboard; Dirt and water resistant, easy to clean
• High quality OPTIMUM keyless chuck as standard
• Separate emergency stop impact switch
• Precisely machined drill table with diagonal T-slots, 360 ° rotatable
• Circulating cooling water channel around the drilling table
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• depth stop
• V-belt cover with safety switch
• V-belt tensioning device
• Massive base plate, large dimensions, strongly ribbed on the back

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Suitable for core drills with diameter 12 - 60 mm and drilling depths 25 and 30 mm

Can be used with METALLKRAFT core drills:

• SILVER-LINE 25 Weldon Ø 12 - 60 mm
• GOLD-LINE 30 Weldon Ø 12 - 60 mm
• BLUE-LINE 30 Weldon Ø 12 - 60 mm
• BLUE-LINE PRO 30 Weldon Ø 12 - 36 mm

Manufacturer
Karnasch
Straße des Friedens 10, 15848 Görsdorf, Germany
www.karnasch.de

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

Available on request

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Heavy, solid cast design
• Smooth running due to ground gear wheels running in an oil bath
• Right/left rotation
• Automatic quill feed with manual fine feed
• Motorized positioning of the Z-axis
• Motorized table feed of the X-axis
• Coolant device
• Machine lamp
• Gear head can be swiveled ± 45
• Solid dovetail guide of the column, hand-scraped, for maximum stability and maximum precision
• Height-adjustable, large protective screen with microswitch
• Drilling depth stop
• Digital position indicator DRO 5
• Drilling / tapping function
• Solid and large cross table, precisely surface-finished with T-slots and adjustable keyways
• Solid cast iron machine base with chip chute
• Single-stage quality industrial electric motor
• Wide speed range from 60 - 2,760 rpm thanks to 2 infinitely variable speeds
• SINAMICS V20 inverter from SIEMENS

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Two-column guided band saw for sawing solid bars and bar profiles
• Siemens S7-1500 control system with a wide range of functions and operation via a large 7" touch display
• With 700 mm material feed as standard
• Cutting movement via rotating spindle and servo motor
• With ARP (automatic cutting feed control) -> Automatic saw blade feed depending on the material resistance. Feed speed is constantly adapted to the current cutting load. ARP enables shorter work processes and a longer service life for the saw bands.
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency converter
• Material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• front band guide moves automatically parallel to the movable vice jaw
• Electrically driven chip clearing brush
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• With automatic material feed: frequency-controlled feed via circulating spindle and servomotor; optical sensor detects when no more material is inserted and pauses the material feed
• With chip conveyor and chip container as standard
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Industrial motor
• Quiet-running spindle thanks to new spindle design
• Machine operation with safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Clockwise/anticlockwise rotation
• Precision spindle bore
• Control panel with user-friendly, dirt and water-resistant membrane keypad
• Speed display
• Separate emergency stop switch
• Thread cutting function
• Precisely machined, sturdy drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated through 360
• Digital depth gauge
• LED machine light integrated in the drill head
• V-belt cover with safety switch
• Thick-walled steel column for high force absorption and stability
• Massive, large base plate with T-slots
• Heavy-duty design of the entire machine

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Heavy industrial version
• Quiet running
• High cutting accuracy due to vibration-free running
• Mitration adjustment -45° to 60° by swivelling the entire saw bow
• Serially with high-quality bi-metalSaw band
• Micro switch for automatic limit switch
• Coolant pump
• Ball bearing saw band guide with carbide plates for optimum cutting results
li>Simple adjustment of lowering speed by means of feed control valve in control panel
• Large dimensioned quick-action vice laterally movable
• Clear control panel

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• With 2-speed gearbox

• Extremely stable construction, entire machine body made of steel
• User-friendly operating concept
• With workplace lighting
• Tilting work table made of gray cast iron
• Speed ​​continuously adjustable
• Tape tension and tape speed indicator
• Blower for sawdust
• Integrated band welding unit with annealing, cutting and grinding device
• With rip fence

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de