Metallitööpingid

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Powerful and low-noise drive via LENZE gear motors with brake
• Compact, heavy-duty, stress-free welded steel design
• Acute bending rail made of tool steel C50 at the clamping beam
• Continuous, replaceable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Clamping beam pressure controlled automatically via motor current absorption
• Clamping beam driven via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine’s front side (right)
• Manual granular adjustment of the bending beam with help of a scale
• Manual crowning via pressure screws in the bending beam
• Remote foot switch with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components by Schneider or Omron
• SH-models with high, segmented crowbar tools
• Stock equipment as standard with: hardened tools, control PT 1, back gauge 6-760mm with hand wheel, measuring device and stop fingers, quick clamping for top tool
• Quality Made in Europe
• Available on request: Models in DUO design featuring full-width acute bending rail and segmented crowbar tools

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Juhtsüsteem: Siemens S7-1500, 7" puuteekraan.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15-150 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi mõõtmed: 6200 × 41 × 1,3 mm.
• Saelindi kaldenurk: 7°.
• Maksimaalne lõikevõime ümarmaterjalile: Ø 550 mm.
• Maksimaalne lõikevõime ristkülikprofiilile: 550 × 500 mm.
• Maksimaalne lõikevõime torukimpudele: 550 × 460 mm.
• Materjalietteanne: 2000 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 4300 × 3290 × 2550 mm.
• Kaal: 5150 kg.

Komplekti kuulub:

• Siemens S7-1500 juhtsüsteem koos 7" puuteekraaniga.
• Automaatne materjalietteanne 2000 mm.
• Hüdrauliline kaheosaline kruustang.
• Elektriline laastutransportöör.
• Laastukonteiner.
• LED-töövalgustus.
• Emulsioonjahutussüsteem.

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• High quality steel knives with a hardness of HRC55-60
• Equipped with two control handles
• Front bearing surface with scale
• Up to 500 mm adjustable backgauge

Võimas magnetilise kinnitusega plekipainutuspink, mis võimaldab kiiresti ja täpselt painutada terast, roostevaba terast, alumiiniumi, vaske ning teisi lehtmetalle. Magnetiline kinnitus tagab materjali kindla fikseerimise ning võimaldab teostada keerukamaid painutusi lihtsamalt kui tavapäraste painutuspinkidega. Komplekti kuuluvad jalglüliti, painutushoova pikendus ja erinevad kinnitusribad, mis muudavad töö mugavaks ja paindlikuks.

Tehnilised andmed:

• Töölaius: 1250 mm
• Maksimaalne lehtmetalli paksus: 1,6 mm
• Tööjõud (survejõud): 6 t
• Toitepinge: 230 V / 50 Hz
• Netokaal: 175 kg
• Brutokaal: 210 kg

• Komplektis: 9 keerdpuuri
• Kinnitus: Morse koonus MK2
• Materjal: HSS kiirlõiketeras
• Puuride mõõdud: 14,5; 16; 18; 20; 22; 24; 26; 28; 30 mm
• Lõikesuund: parempoolne
• Hea laastueemaldus

• Magnetic foot with an adhesive force of 75 kg
• Foot size L x W x H: 62 x 50 x 55 mm
• Connection screw connection for external compressed air supply
• Flexible and stable hose with a length of 500 mm

• For repairing defective threads
• For thread reinforcement of materials with low shear strength
• Practical OPTIMUM metal cassette

• 18 collets; Sizes Ø 2 - Ø 20 mm / DIN ISO 15488
• hook wrench
• Aluminum case