Metallitööpingid

• Heavy welded steel construction
• Horizontal and vertical work possibility
• All three rollers driven by hydraulic motor and planetary gear
• Rolls are hardened
• Hydraulic delivery via two lower rollers
• Lateral mechanical straightening rollers, infinitely adjustable
• Separate control panel with foot control and 2 digital displays

• Hydraulic straightening rollers
• Stepless adjustable rolling speed
• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• NC control

• Please specify when ordering material to be edited!

• Bending rollers on request

• Optionally, the machine can be equipped with bending rollers especially for their needs
• Also atypical sizes can be made on request

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Motorised height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

• Well suited for grinding flat series components, e.g. after laser cutting or punching
• Motorized height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

Tehnilised andmed:

• Maksimaalne töölaius: 2020 mm
• Maksimaalne lehe paksus terase puhul (400 N/mm²): 2,0 mm
• Maksimaalne lehe paksus roostevaba terase puhul: 1,25 mm
• Maksimaalne lehe paksus alumiiniumi puhul: 2,4 mm
• Maksimaalne painutusnurk: 135°
• Maksimaalne avaus ülemise ja alumise tala vahel: 120 mm
• Segmentide mõõdud: 25, 30, 35, 40, 45, 75, 100, 150, 200, 200, 270, 400 ja 400 mm
• Mõõdud (P × L × K): 2500 × 710 × 1500 mm
• Netokaal: 1020 kg
• Brutokaal: 1180 kg
• Tugev ja kompaktne keevitatud konstruktsioon
• Segmenteeritud ülemised tööriistad keerukamate detailide valmistamiseks
• Kindel detaili kinnitamine ülemise tala eelpingestamisega
• Painutusnurga täpne seadistamine skaala ja reguleeritava piirikuga
• Vähe hooldust nõudev konstruktsioon
• Roostevaba terase painutamisel tuleb kasutada karastatud ülemisi tööriistu

KE 6-2 servafaasimismasin metalli servade faasimiseks ja kraatide eemaldamiseks. Tagab puhta töötlemistulemuse ning aitab ette valmistada detaile keevitamiseks ja viimistlemiseks. 

Komplekti sisu:

• Servafaasimismasin KE 6-2
• Standardne lõikepea
• Kasutamiseks vajalikud põhikomponendid
• Kasutusjuhend

Tehnilised andmed:

• Mootori võimsus: 1,1 kW
• Toitepinge: 400 V
• Võrgusagedus: 50 Hz
• Mootori pöörlemiskiirus: 1450 p/min
• Lihvketta läbimõõt: 305 mm
• Lihvimisüksuse kallutusvahemik: 0-45°
• Töölaua mõõtmed: 440 × 210 mm
• Nurgajuhiku reguleerimisvahemik: 180°
• Tolmuärastusava läbimõõt: 50 mm
• Mõõtmed (P × L × K): 560 × 440 × 380 mm
• Netokaal: 24,9 kg
• Brutokaal: 31,4 kg

• NC control for setting the bending angle
• Up to 50 programs can be stored
• Purely motorized drive
• Automatically returns to the starting position

• NC control for setting the bending angle
• Up to 50 programs can be stored
• High-quality, robust design
• Fast tool change
• Purely motorized drive
• Automatically returns to the starting position

• Ideal for on the way to assembly etc.
• Easy installation on standard vices
• Cold bending up to an angle of 180 °
• also possible are partial bends
• Adjustable bending angle stop for high repeat accuracy
• Easiest operation

• inner support cast iron cast iron
• Positioning cube prevents twisting of the workpiece
• hardened bolts
• Easy attachment in standard vices

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain

• Foot control allows sheet positioning with both hands
• Workpiece clamping and bending are motorized via a chain drive
• Setting the bending angle manually, reading the angle on a scale ring
• Many bending options with segmented upper beam
• Accurate movement of the bending beam over large-dimensioned flat guides
• Heavy, robust welded construction

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• LED lighting above the grinding wheels for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Maintenance-free motor for reliable operation
• Robust cast iron housing
• Balanced rotor with high-quality ball bearings for a long service life and smooth running
• Integrated spark guard on the grinding wheels reduces flying sparks
• Protective discs made of shatterproof material for additional safety
• Non-slip and vibration-damping rubber feet for a stable stand
• Standard equipment with coarse and fine sanding discs (grit 36 and 80)
• LED lighting above the sanding discs for optimum visibility in the work area
• Stable and flexibly adjustable workpiece supports for precise work

• Robust machine design
• Manual and automatic mode selectable
• Easy tool change through quick change adapter

• Durable construction of tools and tool guides made of high-quality, hardened steel
• Manual operation via two foot pedals for flow and return
• Automatic mode by programming the front and rear travel end points
• Easy to change the die by quick change recording
• Foot pedal with digital display and emergency stop switch

Hydraulic oil not included

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy-duty version
• Highly quiet running thanks to new spindle design
• Industrial motor
• Separate emergency-stop pushbutton
• Digital depth gauge
• LED machine light integrated in drill head
• Precisely machined, Stable drilling table with diagonally running T-slots with circulating cooling water channel
• Drilling table inclinable ± 45° and rotatable 360°
• V-belt cover with safety switch
• Precision spindle bore
• Machine operation Safety electrics in 24 V DC voltage
• Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle
• Thick-walled steel column for high force absorption and stability
• Massive, large dimensioned base plate with T-slots

• Smooth and powerful brushless drive
• Separate emergency stop impact switch
• Large, height-adjustable protective screen with safety switch for the utmost protection of the user
• Long, ergonomic aluminum die-cast quill lever
  One piece cast (B 24HV with softgrip handles)
• Measurement scale for drilling depth
• Belt cover with safety switch
• Forward / reverse operation
• Machine light

• Quillons made of steel
• Coolant system
• Chip filter according to the Machinery Directive
• Easy tool change through integrated expeller

• Quill stroke 160 mm
• Tapping function
• Digital depth gauge

• Operating mode "auto"
  • Engine starts automatically after lever movement
  • Stops again in the starting position
  • Pushbutton Start and Stop does not have to be pressed during repetitive drilling tasks
• Operating mode "tapping"
  • Engine is activated by moving the handle down
  • The direction of rotation is changed by limit switches on the adjustable drilling depth stop

• Especially quiet running
• High performance
• Approximately constant torque over the entire speed range

• Best power transmission through aluminum pulleys in conjunction with toothed GATES quality V-belt
• Smooth running thanks to ground multi-tooth driver

• Integrated in the housing

• by means of potentiometer

• Guaranteed ; 0.015 mm measured in the quill

• Precision ball bearings
• High quality OPTIMUM keyless chuck as standard

• Integrated in the drill head
• Halogen lamp

• Precisely worked
• Diagonal T-slots
• 360° rotatable
• Circulating cooling water channel

• Solid
• Large dimensions
• Heavily ribbed on the reverse side

• Thick-walled
• High power and stability

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany