METALLKRAFT

HMBS 540 CNC DG 2000 HORIZONTAL on täisautomaatne CNC-juhtimisega kahetulbaline horisontaalne metallilintsaag, mis on mõeldud täismaterjali ja profiilide täpseks nurklõikamiseks vahemikus +60° kuni -60°. Mitsubishi FX5 juhtsüsteem, automaatne nurga positsioneerimine ning 2000 mm materjalietteandja tagavad suure tootlikkuse ja täpsuse seeriatootmises.

Tehnilised andmed:

• Lõikevõime 0° ümarmaterjal (toru): 540 mm.
• Lõikevõime 0° ümarmaterjal (täismaterjal): 400 mm.
• Lõikevõime 0° ristkülikprofiil: 750 × 490 mm.
• Kimpmaterjali lõikevõime 0°: 750 × 450 mm.
• Lõikevõime ±45° täismaterjal: 280 mm.
• Lõikevõime ±60° täismaterjal: 190 mm.
• Lõikenurga vahemik: +60° kuni -60°.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Saelindi kiirus: 15–150 m/min.
• Saelindi mõõtmed: 6880 × 41 × 1,3 mm.
• Töölaua kõrgus: 810 mm.
• Mõõtmed (P × L × K): 4696 × 6013 × 2400 mm.
• Kaal: 3902 kg.

Komplekti kuulub:

• Mitsubishi FX5 juhtsüsteem 7" puuteekraaniga.
• 2000 mm etteanderullikute süsteem.
• Jahutuspump.
• Hüdrauliline saelindi pingutussüsteem.
• LED-töövalgustus.
• Laastueemaldushari.
• BRP lõikeetteande juhtimine.

• Thin sheets are supported in order to be able to apply dimensionally to the backgauge
• pneumatic sheet holding device with selector lever for the direction of the sheet metal chute
• Operator can choose if the section falls into the back room or the operator side

• Pneumatic sheet support, sheet ejection to the front or rear controllable via toggle switch
• Backgauge 750 mm guided on round shafts and driven via ball screw
• Stainless steel table supports with transfer balls for comfortable material handling
• Positioning control of the backgauge Maper HT071 with digital dimension display
• Heavy and robust steel construction in welded design
• Constant, low cutting angle for optimum cutting results
• Side fence 1000 mm with scale and T-slot
• Two material support arms 500 mm with T-slot
• Balls in the support table for easier material transport
• Cutting gap adjustment by means of vernier rings
• High quality blade suitable for stainless steel
• LED illumination of the cutting area
• Continuous finger protection device
• Mobile foot pedal with emergency stop switch
• All moving parts with low-maintenance bearings
• Electrical system from Siemens and Schneider

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• For steel
• two cutting speeds
• Reduction gear, silent in oil bath running
• automatic membrane coolant pump with standard coolant filter
• movable protection device ensures optimum safety when cutting
• Control handle with safety switch
• electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector and overload protection
• Machine head rotatable by 45 ° on both sides
• 45 ° swiveling quick-action vice on both sides
• Quick-action vise with double clamping device guarantees a precise and low-profile cut
• Quality Made in Europe

• 45 ° swiveling quick-action vice on both sides

• Machine head guided vertically, with dovetail guide and adjustable wedge bar
• Swivelling 45° to the left and 60° to the right, with locking at -45°, 0°, -45°, 60°
• Two cutting speeds
• Adjustable depth stop for the vertical stroke of the saw head
• Cross-movable vice with anti-burr device
• Stable and robust construction
• Easy and hassle-free operation
• Reduction gearbox quietly running in the oil bath
• Coolant pump with coolant filter
• Coolant jet distribution, for better lubrication of the saw blade
• Chip crusher for leaf cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch

• Two cutting speeds
• Rotatable machine head 45 ° to the left and 45 ° to the right
• Reduction gear running in oil bath
• Automatic membrane coolant pump with standard coolant filter
• Quick-action vise with antigraking device, swiveling 45 ° to the left and 45 ° to the right
• Vise longitudinally displaceable and thus suitable for longitudinal cuts and slits
• Movable guard ensures optimum safety when cutting
• Control handle with safety switch
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Quality Made in Europe

• With adjustable friction clutch, which prevents the saw blade from breaking
• MKS 316 R: particularly suitable for machining stainless steel due to slow speeds

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• various roller versions available
• Roller support infinitely height adjustable
• extra wide edition
• universally applicable

• Heavy welded steel construction
• top and clamping roller driven
• Swing-out top roller
• Manual adjustment of the clamping and side roller
• Roller drive via powerful electric motor and gearbox
• Wire grooves on the clamping roller
• Safety device emergency stop line
• With mobile control panel and foot pedal
• Note: Please specify the type of material to be processed when ordering!
• Note: Other models on request

• Swing-out top roller
• Control panel with digital display and manual operation (optional)
• RBM 2050-30 E PRO with optional motorized infeed of the side roller and digital display for side roller

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• For precision surface grinding
• Maximum stiffness and stability thanks to tension-free re-heated and hardened cast iron construction
• High-quality spindle with precision cone roller bearings (circular accuracy 2 microns)
• Electromagnetic clamping plate for fixing the workpiece including automatic demagnetization function
• Automatic central lubrication for all slides and spindles
• Hand scraped and Turcite-B-coated V-flat guides guarantee extremely uniform, low-friction movement and highest precision
• Halogen working light dustproof, completely contact-proof and protected against jet water according to IP65
• Second grinding wheel flange included in delivery

• Saw head swivelby by 45° to the left and right
• Stable and robust construction
• Precise cut
• Turntable and saw shaft mounted on bearings
• Quick-release screw sticks with plastic-equipped aluminium clamping jaws
• Easy and hassle-free operation
• Saw head for chiverge cut by 45° to the left tiltable
• Two hand-held screw sticks

• Punching station, flat steel shears, angle steel shears, sectional steel shears, available with notching station starting from HPS 45S
• DS series with two working cylinders and two foot pedals for simultaneous use with punching station and sectional steel shears
• Stepless adjustment of the stroke
• Larger reach for punching station with 620 mm optional, available from HPS 55DS
• Heavy and rigid welded construction
• Standard with notching knife starting from HPS 45S
• With powerful 400 Volt motor
• V-notching knife, oversized punching device and larger throat depth for punching station available on request
• Two-stage foot pedal for inching operation
• Stamps and dies No. 1, No. 2, No. 3, No. 30, No. 45, No. 60 can be used with the standard delivery scope of the machine. Use of punch and die No. 4 and No. 80 optional (except HPS 40S)

Advantages of punching over drilling:

• High time savings - cycle times
• No chips
• No cooling

Note:

• All hydraulic sectional shears are delivered with oil

• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• High quality knife
• Angle adjustable side stop with millimeter scale
• Highest possible safety thanks to hold-down, which protects the fingers at the same time
• 500 mm backgauge

• Roller and guideway system on which lighter wood, metal or plastic profiles can be precisely sawed, drilled or milled
• Substructure made of solid 3 mm steel profiles, painted and with adjustable feet
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• With length stop, magnetic tape measuring system with digital display, measuring accuracy +/- 0.2 mm per meter
• Stop car is 4-roller bearings, thus manually easily displaced
• Adjustable stop arm and can be folded away to the rear
• The maximum measuring length is the length of the web minus the stop length of 250 mm
• Quality Made in Germany

• For metal sheets up to 1.2 mm and continuous webs up to a width of 1020 mm
• Ideal for the craftsman on the road
• Collapsible base
• Stable and robust construction

• Ideal for the artisan on the move
• stable and robust construction
• small dimensions due to collapsible base
• easy to transport
• for metal sheets up to 1.2 mm and endless sheets up to a width of 1020 mm
• the standard hold-down ensures good cutting results
• optimal price-performance ratio
• Quality Made in Europe