METALLKRAFT

• Two-column guided horizontal saw for sawing solid bars and bar profiles
• Mitsubishi FX 5 control system with simple operation via 4.3" touchscreen
• Cutting movement via hydraulic cylinder
• With BRP (cutting feed control) -> if a set ampere limit is exceeded, the feed movement is stopped while the saw blade continues to run in order to convey chips out of the cutting channel. Once the normal load is reached, the sawing process continues
• Automatic positioning after entering the desired angle
• Hydraulic clamping of the turntable enables precise angular cutting
• Robust machine body and the smallest possible distances between the saw blade, machine guide and workpiece minimize vibrations for maximum sawing performance
• Infinitely variable cutting speed from 15 - 150 m/min
• Saw blade drive via bevel gearbox, asynchronous motor and frequency inverter
• For straight cuts, the material is clamped in front of and behind the cut using a two-part vice
• Pressure adjustment of the hydraulic vice clamping via control valve with pressure gauge
• Saw blade inclination of 7° and hydraulic saw blade tension increase the service life of the saw blade
• Front band guide moves automatically parallel to the movable vice jaw
• chip clearing brush driven via belt roller
• Emulsion cooling with liquid distribution into the saw blade guides and directly into the cutting channel
• More powerful motor optionally available
• Saw blade guides with integrated cooling system

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Heavy, stable construction
< li>Exact angle adjustment via two handwheels
• punching station with 12 tons of punching pressure on the back

• User-friendly and energy-saving thanks to the hydraulic drive
• Heavy, stable construction
• Solid table with recessed scales and T-slots for precise adjustment of the swiveling stops
• Exact angle adjustment Via two handwheels
• Finger protection cover made of plexiglass for an optimal view of the cutting edge
• Punching station with 12 tons of punching pressure on the back
• Operation via pedal
• Delivered with hydraulic oil

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• For punching out corners, shapes, etc.
• Robust construction made of high quality grey cast iron
• Adjustable stops allow comfortable work and repeatability of the notching process
• Scale on the lower cutting edge

• for cutting metal, paper, plastic and other materials
• with miter stop in front
• hardened knife
• Backgauge with scale

• Sanding belt change in seconds due to the quick-tensioning system
• Automatic re-tensioning of the sanding belt by spring-supported belt tensioning system
• Easy adjustment of the belt run using the adjusting screw
• Can be used as a table model and also as a standing model with the optional base
• One belt speed each for grinding steel and stainless steel

• Powerful motors and vibration-free operation for the best sanding results
• Sanding belt can be changed in seconds thanks to the quick-clamping system
• Automatic retensioning of the sanding belt thanks to spring-supported belt tensioning system
• Large surface sanding area thanks to fold-away upper sanding belt cover
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Continuous sanding surface after removal of attachments enables sanding of long workpieces as well
• Can be used with and without suction
• One extraction nozzle on the spark box and one on the rear belt roller
• Protective screen can be folded away
• Can be used as a table model and, with the optional base, also as a floor model
• Model MBSM 100-140-2 with two belt speeds - for sanding steel and stainless steel

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Integrated extraction system
• For deburring with practical workpiece support and spark box
• Convenient operation thanks to easily adjustable clamping device
• The rotating clamping jaws of the clamping device enable secure clamping of square tubes, round tubes and flat steel
• Adjustable grinding angle from 30 - 90° and from 0° - 60
• The front contact roller can be replaced quickly and easily without tools thanks to the optimized quick-change holder
• Particularly durable thanks to larger and improved roller bearings
• Practical contact roller holders integrated in the base frame
• Extensive range of contact rollers for various pipe diameters available as accessories
• Quick changeover between pipe grinding and belt grinding possible
• Powerful motor
• Almost all settings can be made without tools (operating tool included in the scope of delivery)
• Large, foldable protective screen with optimum field of vision
• Two belt speeds for optimum adaptation to the respective material (15 m/s ideal for stainless steel and aluminum, 30 m/s perfect for steel)
• With two easily removable spark boxes

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

Tehnilised andmed:

•  Mootori võimsus: 1,1 kW
•  Toitepinge: 400 V
•  Võrgusagedus: 50 Hz
•  Kiirus: 7 m/min
•  Ülemise võlli läbimõõt: 35 mm
•  Alumise võlli läbimõõt: 35 mm
•  Ülemise rulli läbimõõt: 137 mm
•  Alumise rulli läbimõõt: 137 mm
•  Pikkus: u 1050 mm
•  Laius/sügavus: u 500 mm
•  Kõrgus: u 1250 mm
•  Kaal: u 350 kg

Painutusvõime standardrullidega:

•  Nelikantmaterjal: 18 mm
•  Nelikantmaterjali min painutusläbimõõt: 250 mm
•  Lattmaterjal, painutus kergema telje suunas: 50 × 12 mm
•  Min painutusläbimõõt: 400 mm
•  Lattmaterjal, painutus tugevama telje suunas: 35 × 8 mm
•  Min painutusläbimõõt: 300 mm
•  UPN-profiil, välisäär: UPN 40 × 20 mm, min painutusläbimõõt 350 mm
•  UPN-profiil, välisäär: UPN 35 × 18 mm, min painutusläbimõõt 500 mm
•  UPN-profiil, siseäär: U30 × 15 mm, min painutusläbimõõt 500 mm

Painutusvõime lisavarustusega:

• Nelikanttoru: 25 × 2 mm, min painutusläbimõõt 450 mm
• Ristküliktoru: 30 × 15 × 2,5 mm, min painutusläbimõõt 500 mm
• Ümartoru: 25,4 × 2,3 mm, min painutusläbimõõt 300 mm
• Ümarprofiil: 22 mm, min painutusläbimõõt 200 mm
• Võrdhaarne nurkprofiil, väljast painutamine: 35 × 35 × 5 mm, min painutusläbimõõt 400 mm
• Võrdhaarne nurkprofiil, seest painutamine: 30 × 30 × 4 mm, min painutusläbimõõt 550 mm

* Painutusvõime andmed kehtivad materjalile maksimaalse voolavuspiiriga 24 kg/mm²; roostevaba terase puhul rakendatakse painutusvõime tegurit 0,7.

Komplekti sisu:

• Standardpainutusrullid
• Etteanderullide digitaalsed näidikud
• Mobiilne juhtpult
• Sirgestusrullid
• Alus

Tehnilised andmed:

• Maksimaalne lõikevõime ümarmaterjalile 0°: 1200 mm.
• Maksimaalne lõikevõime täismaterjalile 0°: 1200 mm.
• Maksimaalne lõikevõime ristkülikprofiilile 0°: 1200 × 1400 mm.
• Kimpmaterjali lõikevõime: 1200 × 680 mm.
• Mootori võimsus: 11 kW.
• Toitepinge: 400 V / 50 Hz.
• Saelindi kiirus: 15-80 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi mõõtmed: 11 650 × 80 × 1,6 mm.
• Materjali etteande kõrgus: 800 mm.
• Mõõtmed (P × L × K): 6200 × 2350 × 4000 mm.
• Kaal: 25 000 kg.

Komplekti kuulub:

• Saelint.
• Kasutustööriistad.
• Kaks tööala valgustit.
• ARP-süsteem.
• Laastukonveier.
• Sagedusmuundur.
• Jahutussüsteem saelindijuhikutele.
• Mootoriga laastueemaldushari.
• Automaatne saelindijuhiku reguleerimine

FSM 2550 DT on professionaalne täppistasapinnalihvpink, mis on loodud suure täpsuse ja töökindluse tagamiseks metallitööstuse ning tööriistavalmistuse rakendustes. Masin võimaldab saavutada kvaliteetse pinnaviimistluse ja täpsed mõõdutulemused ka nõudlikes tootmisprotsessides.

Tehnilised andmed:

• Magnetlaua mõõdud: 500 × 250 mm
• Lihvketta mõõdud: Ø 180 × 13 × 31,75 mm
• Spindli kiirus: 2900 p/min
• Maksimaalne kaugus spindli ja laua vahel: 500 mm
• Peamootori võimsus: 1,5 kW
• Hüdraulikapumba võimsus: 0,75 kW
• Toide: 400 V / 50 Hz / 3~
• Netokaal: 1350 kg
• Transpordikaal: 1950 kg
• Minimaalne vertikaalsööte samm: 0,001 mm
• NC-juhitav automaatne vertikaalsööde
• Elektromagnetiline magnetlaud standardvarustuses

Komplekti sisu:

• Täppistasapinnalihvpink FSM 2550 DT
• Standardvarustuses tööks vajalikud põhikomponendid
• Kasutus- ja hooldusjuhend
• Tehase poolt ettenähtud lisatarvikud vastavalt komplekteeringule

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

ULMS 500 on professionaalne alusraami sisse ehitatud ketassaag alumiiniumi, värviliste metallide ja profiilmaterjalide täpseks lõikamiseks. 500 mm saeketas, tugev konstruktsioon ja suur tööpind tagavad kvaliteetse lõiketulemuse tootmiskeskkonnas.

Tehnilised andmed:

• Tüüp: alusraami sisse ehitatud kergmetallide ketassaag
• Kasutusala: alumiinium, värvilised metallid ja profiilmaterjalid
• Saeketta läbimõõt: 500 mm
• Paigaldusviis: tööpinna alla integreeritud
• Sobib profiilide ja konstruktsioonielementide lõikamiseks
• Sobib tööstuslikuks ja seeriatootmise kasutuseks
• Tugev tööstuslik konstruktsioon

Komplekti sisu:

• Metallkraft ULMS 500 kergmetallide ketassaag
• Materjali tugisüsteem
• Kaitsekate
• Kasutustööriistad
• Kasutusjuhend

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened