METALLKRAFT

• Powerful motor and vibration-free operation for the best sanding results
• Continuous face sanding surface thanks to removable attachments enables sanding of even long workpieces
• With two belt speeds
• Quick clamping system enables fast sanding belt changes
• Integrated extraction system in the base with polyester filter pockets
• One extraction nozzle each directly on the spark box and on the rear belt roller
• Can be used with and without suction
• Easy adjustment of the belt run via adjusting screw on the front contact roller
• Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system
• Infinitely tiltable sanding unit
• Fold-away protective screen

• The workpiece clamping by means of foot pedal thereby both hands remain free for the material supply
• Different tool variants available E, S2, HS2 and HSG
• The powerful auxiliary cylinder facilitates bending
• Next passage between top and bottom cheek of up to 25 mm
• Self-lubricating plain bearings
• Clamping pressure of the upper beam via non-slip thumbscrews easily adjustable
• Adjustment of material thickness by means of knurled screw
• Adjustable stop for bending angle

• With segmented sharp-bending tools, continuous bending strip and continuous bed support

• With segmented sharpening tools, segmented bending strip and continuous bed support

• With segmented gooseneck tools, segmented bending bar and segmented bed support
• Segments have a hardness of HRC24-26

• Sheet thickness max.: Performance data based on material with tensile strength 400 N/mm²
• Bending capacity VA: factor 0.75
• Bending capacity aluminum: factor 1.2
• Hardened top tools are required to bend VA

• P version with two pneumatic auxiliary cylinders and foot switch
• Sturdy and robust welded construction
• Suitable for cutting steel and non-ferrous metals
• Foot operation leaves both hands free for material feed
• Large viewing window made of Plexiglas
• High-quality steel blade
• Baffle guide
• Simple adjustment of the cutting blade via eight screws
• Angle-adjustable side stop with millimeter scale
• Maximum distance from finger guard to work table is 5 mm, ensuring maximum safety
• Cutting line lighting as standard

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the back of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• With length measuring device and digital dimensioning system
• Roller and measuring track with battery-operated LCD display and magnetic tape measuring system
• Quality Made in Germany

Please specify when ordering mounting side and height!

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• Suitable for wet grinding machines
• Filter area visible through transparent plastic windows

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Machine head guided vertically, with dovetail guide and adjustable wedge bar
• Swivelling 45° to the left and 60° to the right, with locking at -45°, 0°, -45°, 60°
• Two cutting speeds
• Adjustable depth stop for the vertical stroke of the saw head
• Cross-movable vice with anti-burr device
• Stable and robust construction
• Easy and hassle-free operation
• Reduction gearbox quietly running in the oil bath
• Coolant pump with coolant filter
• Coolant jet distribution, for better lubrication of the saw blade
• Chip crusher for leaf cleaning
• Electrical system in low voltage 24 volts, with emergency stop switch, main switch, speed selector switch and overload protection
• Control handle with safety switch

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• Feed / discharge roller conveyor
• Roller conveyor without scale and stop with side guide
• Quality Made in Germany

• Suitable for core drills with diameter 12 - 60 mm and drilling depths 25 and 30 mm

• SILVER-LINE 25 Weldon Ø 12 - 60 mm
• GOLD-LINE 30 Weldon Ø 12 - 60 mm
• BLUE-LINE 30 Weldon Ø 12 - 60 mm
• BLUE-LINE PRO 30 Weldon Ø 12 - 36 mm

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

Tehnilised andmed:

• Juhtsüsteem: Siemens S7-1500, 7" puuteekraan.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Jahutuspumba võimsus: 0,12 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15-150 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi mõõtmed: 6200 × 41 × 1,3 mm.
• Saelindi kaldenurk: 7°.
• Maksimaalne lõikevõime ümarmaterjalile 0°: Ø 550 mm.
• Maksimaalne lõikevõime ristkülikprofiilile 0°: 550 × 500 mm.
• Maksimaalne lõikevõime torukimpudele: 550 × 460 mm.
• Materjalietteanne: 700 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 4300 × 2030 × 2550 mm.
• Kaal: 3790 kg.

Komplekti kuulub:

• Siemens S7-1500 juhtsüsteem koos 7" puuteekraaniga.
• Automaatne materjalietteanne 700 mm.
• Hüdrauliline kaheosaline kruustang.
• Elektriline laastutransportöör.
• Laastukonteiner.
• LED-töövalgustus.
• Emulsioonjahutussüsteem.

• Ideally suited for assembly companies, facade builders, locksmiths, repair shops, exhibition stand builders, etc.
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with low burr
• Chips dissipate the heat, thus only low heat development during cutting
• Heavy-duty motor with soft start and overload protection
• Immersion into the material possible
• Uncomplicated and fast cutting depth adjustment by means of a precise and easy to read scale
• Double-guided rip fence for precise cutting guidance
• Stable and robust construction
• Handle can be screwed in at two different positions for comfortable handling of the saw in any position
• Simple operation

• Simple operation
• Heavy, compact welded construction
• Particularly low maintenance
• For easy bending with precise adjustment of the bending angle using a stop with scale
• Sheet thickness adjustable via bending beam
• Tools for VA on request: sharp bending rail and bending bar made of Toolox 33, segmented tools and bending bar made of Toolox 33 and segmented goat foot tools made of Toolox 33
• Quality Made in Europe

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Closed construction prevents flying chips
• Connection for external suction device

• Ideal for sawing steel, sandwich panels, trapezoidal sheets, cable ducts, steel pipes and profiles, ferrous and non-ferrous metals, composite materials, etc.
• Lightweight magnesium construction: only 8.4 kg without saw blade
• Ideal for use where cut-off machines are not strong enough or work uncleanly
• Cuts stainless steel with little burr
• Closed construction prevents the flying of chips
• Integrated chip tilting compartment
• Heavy-duty motor with soft start and overload protection
• LED load indicator for maximum cutting efficiency and control
• Sturdy and robust construction
• Easy operation
• Connection for external suction device

Tehnilised andmed:

• Maksimaalne lõikekõrgus: 255 mm.
• Lõikeulatus (throat): 396 mm.
• Saelindi kiirus: 20-80 m/min ja 250-1000 m/min.
• Saelindi pikkus: 3145 mm.
• Maksimaalne saelindi pikkus: 3180 mm.
• Saelindi laius: 16 mm.
• Töölaua mõõtmed: 550 × 600 mm.
• Töölaua kandevõime: 150 kg.
• Töökõrgus: 1000 mm.
• Töölaua kallutus vasakule/paremale: 12° / 15°.
• Töölaua kallutus ette/taha: 8° / 8°.
• Saelindi keevitusseadme võimekus: kuni 16 mm.
• Veoratta läbimõõt: 408 mm.
• Mootori võimsus: 1,5 kW.
• Toitepinge: 400 V / 50 Hz.
• Müratase: 70,5 dB(A).
• Mõõtmed (P × L × K): 940 × 675 × 1840 mm.
• Kaal: 410 kg.

Komplekti kuulub:

• Saelint 3150 × 8 × 0,65 mm, 14T.
• Paralleeljuhik.
• Integreeritud saelindi keevitus-, lõõmutus- ja lihvimisseade.

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 400 mm
• Precision flat steel guide attached to the rear of the roller conveyor
• Sturdy, 6-way ball-bearing material stop trolley, easy-moving, manually movable and lockable
• Stopper with reading magnifying glass facilitates reading on the mm scale
• Robust stop arm attached to the stop truck, adjustable to the tool (0 point)
• Quality Made in Germany

Working height up to 1020 mm possible with optional foot plates.

By request:

• Working height from 1020 mm can be extended from the factory
• Also with 500 mm web width

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Cutting thickness up to 4mm
• Intuitive control panel and ergonomic design make handling easier
• Compact and space-saving, ideal for workshops with limited space
• User-friendly and energy-saving thanks to hydraulic drive
• Operation via foot pedal
• Waste pieces fall into a pull-out drawer
• Sliding hold-down device

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany