METALLKRAFT

Tehnilised andmed:

• Juhtsüsteem: Mitsubishi FX5, 7" puuteekraan.
• Mootori võimsus: 5,5 kW.
• Hüdraulikapumba võimsus: 0,75 kW.
• Toitepinge: 400 V / 50 Hz.
• Lõikekiirus: 15-150 m/min.
• Kiiruse reguleerimine: sujuv.
• Saelindi kalle: 7°.
• Materjalietteanne ühe tsükliga: 2000 mm.
• Maksimaalne materjalietteanne: 9999 mm.
• Töölaua kõrgus: 800 mm.
• Mõõtmed (P × L × K): 4300 × 3400 × 2550 mm.
• Kaal: 4950 kg.

Komplekti kuulub:

• Mitsubishi FX5 juhtsüsteem koos 7" puuteekraaniga.
• Automaatne materjalietteanne 2000 mm.
• Hüdrauliline kaheosaline kruustang.
• Elektriline laastutransportöör.
• Laastukonteiner.
• LED-töövalgustus.
• Emulsioonjahutussüsteem.

• Powerful and quiet drive via LENZE gear motors with brake
• Compact, heavy and stress-free welded steel construction
• Sharp bending rail made of tool steel C50 at the clamping cheek
• Continuous, exchangeable bed support made of tool steel C50
• Continuous bending rail made of tool steel C50 at the bending beam
• Automatic pressure regulation of the clamping cheek via motor current pick-up
• Drive of the clamping cheek via generously dimensioned trapezoidal thread spindles
• Bending angle adjustment PT 1 via potentiometer on the machine front (right)
• Manual fine adjustment of bending beam with scale
• Manual crowning via pressure screws in the bending beam
• Foot remote control with emergency stop function
• All moving parts with low-maintenance bearings
• Electrical components from Schneider or Omron
• SH-models with high, segmented goat's foot tools
• Quality Made in Europe
• Available on request: Models in DUO design with continuous sharp bending rail and segmented goad foot tools, standard tools hardened, sharp bending rail and bending bar hardened, segmented tools and bending bar hardened, segmented goad foot tools and bending bar hardened

• Sliding upper beam with adjustable flat guides
• Manual backgauge with 550 mm travel range
• Solid 90° side fence with 1000 mm length, T-slot, tilting cam and scale
• LED cutting line lighting and slotted holes in the top cover for an optimum view of the cutting edge for cutting on tear
• High-quality, rotatable knives suitable for cutting stainless steel Heavy-duty hold-down beam with material-friendly polyurethane inserts suitable for cutting stainless steel
• Heavy-duty hold-down bar with material-friendly polyurethane inserts
• Rear area protected by light barrier
• Operation via mobile foot pedal console with emergency stop

• For use in industry and trade
• Heavy and stable cast iron construction
• Asymmetrical 3-roller system
• Upper roller swung out, thereby easy removal of the finished workpiece
• Easily adjustable upper and lower roller
• The foot control leaves both hands free for the material supply
• User-friendly
• Powerful 400 volt engine
• Optionally available: hardened rollers

• When ordering, please specify the type of material to be processed!
• All accessories only possible ex works.

• Heavy steel welded construction
• Upper and pinch roller driven
• Motorized delivery of the side roller
• Swing-out top roller
• Roller drive via powerful electric motor and gearbox
• Safety device Emergency line
• Mobile control panel

• Swiveling top roller

• Please specify when ordering material to be processed!
• Other models on request

• Stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel
• All roller conveyors of the MRB standard series also available with plastic rollers
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 260 mm
• With length measuring device
• Roller and measuring track with mm-scale, manual measuring system with C-guide profile and sliding flap stop
• Quality Made in Germany

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Heavy welded steel construction
• Horizontal and vertical work possibility
• All three rollers driven by hydraulic motor and planetary gear
• Rolls are hardened
• Hydraulic delivery via two lower rollers
• Lateral mechanical straightening rollers, infinitely adjustable
• Separate control panel with foot control and 2 digital displays

• Hydraulic straightening rollers
• Stepless adjustable rolling speed
• Tube bending rolls
• Angle bending rolls
• Special straightening rollers
• Profile bending rolls
• Plastic rollers for soft materials
• NC control

• Please specify when ordering material to be edited!

• Bending rollers on request

• Optionally, the machine can be equipped with bending rollers especially for their needs
• Also atypical sizes can be made on request

• Increased stability due to improved design of the machine base, cylinder adjustment via handle and hand wheel, manometer on the machine side
• Suitable for assembly and straightening work as well as for workpiece checks or the pressing and pressing of bearings and other components
• Ideal for technical workshops, repair shops and technical training facilities
• With two piston speeds and pressure regulation by throttle screw
• Pressure gauge for pressure gauge
• Heavy machine frame welded from steel profiles to absorb the resulting compressive force of the cylinder
• The hydraulics work extremely precisely in both electrical and manual mode
• Adjustment of the cylinder via rack to handwheel
• Heavy and robust welded construction
• More extensive accessories
• Quality made in Europe

• Very heavy and robust welded construction
• Dynamic drive of the bending beam by means of two frequency-controlled motors with gears
• Over cheek clamping via trapezoidal thread
• High-quality Lenze motors
• Continuous sharp bending rail
• Tools suitable for bending stainless steel
• Bending angle adjustment via touchscreen NC control system
• Sheet thickness adjustment manually at the bending beam
• Manual crowning device of the bending beam
• Operation via double foot pedal with emergency stop function
• Clean motor-driven machine without hydraulics
• SH models with segmented, high goat foot tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Material roller conveyor with stable U-shaped closed construction made of 3 mm sheet steel profile
• Support rollers made of galvanized steel (optionally also available with plastic rollers)
• Supported rollers ball-bearing
• The maximum measuring length is the length of the track minus the stop length 450 mm
• Length measuring device with handwheel adjustment
• Roller and measuring track with digital LED dimension display in mm, electrical connection 230 V, 50 Hz with power supply unit
• Measuring stop adjustable by handwheel from the workplace, with pneumatic brake for measuring fixation
• Sturdy material stop trolley, 12 ball bearings, movable on large dimensioned guide profile. The stop arm is adjustable and hinged.
• For roller conveyors with a length of more than 5 m, a cable drag chain is used
• Mounting side as desired right or left

Equipment details

position indicator

• 5-digit LED measurement display for constant, millimeter-accurate control of the current position of the stop car
• Position indicator with hollow shaft encoder mounted directly on the drive shaft
• Measuring accuracy / m: ± 0.5 mm

stop arm

• 900 mm long stop arm
• Stop plate adjustable to zero point and manually hinged backwards
• Multiple ball bearings, thus free of play
• Quality Made in Germany

• Motorised height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

• Well suited for grinding flat series components, e.g. after laser cutting or punching
• Motorized height adjustment of the work table via joystick with digital display
• Conveyor table with profile conveyor belt for optimum hold during processing

• Easy handling
• segmented upper tools
• Swivel bending function with secure clamping of the workpiece by preloading the upper beam
• heavy, compact welded construction
• For easy bending with exact adjustment of the bending angle by means of a stop with scale
• particularly low maintenance

segment breakdown

• 25-30-35-40-45-75-100-150-200-200-270-400-400

Note on technical data:

Sheet thickness max .: Performance data based on material with tensile strength 400N / mm²; Bending capacity VA: factor 0.75; Bending capacity Alu: factor 1,2; Hardened top tools are required to bend stainless steel

• Ideal for producing clean visible edges
• Handy and powerful device
• Setting the chamfer height without tools
• For processing steel
• For deburring radii and holes from 30 mm diameter
• With 3-fold insert holder
• Feed is done manually
• Speed ​​of 3,000 - 6,000 rpm infinitely adjustable
• Included carbide indexable inserts are also suitable for machining stainless steel at reduced speeds - tool life depends on specific operating conditions

• NC control for setting the bending angle
• Up to 50 programs can be stored
• Purely motorized drive
• Automatically returns to the starting position

• NC control for setting the bending angle
• Up to 50 programs can be stored
• High-quality, robust design
• Fast tool change
• Purely motorized drive
• Automatically returns to the starting position

• Ideal for on the way to assembly etc.
• Easy installation on standard vices
• Cold bending up to an angle of 180 °
• also possible are partial bends
• Adjustable bending angle stop for high repeat accuracy
• Easiest operation

• inner support cast iron cast iron
• Positioning cube prevents twisting of the workpiece
• hardened bolts
• Easy attachment in standard vices

• Semi-motor version - manual operation of the upper cheek, bending process motorised
• Designed for professional use
• With foot operation
• heavy, compact weldment
• With continuous sharp bending rail
• Standard with manual adjustment of the bending angle by means of nonius ring
• Particularly low-maintenance
• S-models with segmented top tools
• SH models with high, segmented goat foot tools
• Hardening of standard tools available on request: sharp bending rail and bending strip hardened, segmented tools and bending strip hardened, segmented goat foot tools and bending strip hardened
• Further swivel bending machines available on request

• Foot operated
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp bending bar
• In series with manual adjustment of the bending angle
• Especially low-maintenance
• The workpiece is clamped by a motorized mechanism
• S-models with segmented upper tools
• SH-models with high, segmented casting foot tools

• Other models
• Standard tools hardened
• Hardened sharp bending bar and bending bar
• Segmented tools and hardened bending bar
• Segmented casting foot tools and bending bar hardened

• With foot control
• Heavy, compact welded construction
• Powerful drive by Lenzemotors
• With continuous sharp-bending rail
• Seriesßig with manual adjustment of the bending angle
• Especially low-maintenance
• Clamping of the workpiece is motor-driven
• SH models with high, segmented cast base tools
• DUO models with continuous sharp-bending rail and high, segmented goat foot tools

• Standard tools hardened
• Sharp bending bar and bending bar hardened
• Segmented tools and bending bar hardened
• Segmented cast foot tools and bending bar hardened

• Direct magnetic belt measuring system
• Delivery of direct magnetic belt measuring system including display unit Z58
• Independent stop carriage and length measuring drives
• Dimension is displayed via display unit Z58
• Sensor head mounted directly on the stop carriage
• Dimensional and repetition accuracy ± 0.1 mm per metre
• Cable and air ducting via energy drag chain