Aircraft A-PLUS 31-13 K on professionaalne kruvikompressor integreeritud külmkuivati, 30 kW IE3 mootori ja kuni 3400 l/min tootlikkusega. Sobib tööstuslikeks rakendusteks, kus on vajalik kuiv ja kvaliteetne suruõhk.
AIRPROFI DUO 703/2x75/13 on universaalne suruõhujaam kahe 75-liitrise kuumtsingitud paagiga. Professionaalne 13-barine kolbkompressor tagab kuni 460 l/min tootlikkuse ning sobib tööstuslikuks ja töökoja kasutuseks.
Tehnilised andmed:
Kompressori tüüp: statsionaarne kolbkompressor
Kompressorisüsteem: HOS
Maksimaalne töörõhk: 13 bar
Paagi kogumaht: 150 l
Paakide arv: 2
Ühe paagi maht: 75 l
Paakide viimistlus: kuumtsingitud seest ja väljast
Imemisjõudlus: 575 l/min
Tootlikkus: 460 l/min (6 bar töörõhul)
Silindrite arv: 2
Surveastmete arv: 2
Mootori võimsus: 4 kW
Sisendvõimsus: 4,8 kW
Toitepinge: 400 V
Võrgusagedus: 50 Hz
Kompressori pöörlemiskiirus: 850 p/min
Õhu väljund: 3/4"
Müratase (Lp): 79 dB(A)
Pikkus: 1200 mm
Laius: 900 mm
Kõrgus: 1140 mm
Kaal: 230 kg
Survelüliti: CONDOR
Ajam: kiilrihmülekanne
Rõhuregulaator: olemas
Faasimuundur: olemas
Kondensaadi äravool: 3/8" kuulventiil mõlemal paagil
A-PLUS 31-08 K on professionaalne kruvikompressor integreeritud külmkuivati ja 30 kW IE3 mootoriga. Seade tagab kuni 4700 l/min tootlikkuse ning toodab kvaliteetset kuiva suruõhku tööstus- ja tootmisrakenduste jaoks.
A-K-MAX 24-13 VS (PM) on sagedusjuhtimisega kruvikompressor IE4 püsimagnetmootoriga. Tootlikkus kuni 3300 l/min, maksimaalne rõhk 12,5 bar ning LOGIN puuteekraan tagavad energiatõhusa ja töökindla töö.
A-PLUS 22-13 K rihmülekandega kruvikompressor integreeritud külmkuivatiga. Võimas 22 kW mootor, maksimaalne töörõhk 13 bar ja tootlikkus kuni 2400 l/min. Sobib tööstuslikuks ja professionaalseks kasutamiseks.
Absolute Low maintenance drive with maximum energy efficiency through direct-coupled coaxial screw compressors
Standard EasyTronic IV control prevents engine overload, reduces wear and ensures a longer service life
High cooling effect and lower noise level due to thermostatically controlled centrifugal fan
Longer life of the device and lower fluctuations of the oil temperature thanks to thermostatically controlled fan, optimal cooling air flow and generously dimensioned heat exchanger
Less effort for drying and filtration of the compressed air generated by integrated aftercooler
Secured maintenance intervals by recording the load and follow-up times via operating hours counter
Display of the maintenance requirement via automatic message
Avoidance of damage during commissioning or after relocation due to integrated direction of rotation control for the motor
Service-friendly due to optimal accessibility and easy assembly / disassembly of all serviceable components
Easy transport and setup due to small outer dimensions
Monitoring of engine and compressor speed by SpeedTronic Control
Energy savings with frequency-controlled compressors:
Based on the frequency converter technology, the delivery volume of the compressor adapts to the actual consumption. The electronic control monitors the engine and compressor speed and keeps the network pressure constant. The user receives advanced advanced technology in a small space.
Your advantages:
Active energy saving
Ideal for frequently changing compressed air consumption
The variable speed compressor achieves maximum efficiency and keeps the network pressure constant, even when consumption fluctuates widely.
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
A-K-MAX 31-10 (IE4) kruvikompressor ühendab 30 kW IE4 energiatõhusa mootori, 10-bar töörõhu ja LOGIN puuteekraani juhtsüsteemi. Sobib professionaalseks kasutamiseks tootmis- ja tööstuskeskkondades.
Professionaalne statsionaarne rihmülekandega kolbkompressor nõudlikuks tööstuslikuks kasutamiseks. Kaheastmeline 2-silindriline kompressoriplokk töötab madalal pöörlemiskiirusel, mis tagab vaiksema töö, väiksema vibratsiooni ja pikema kasutusea. Kuumtsingitud 270-liitrine suruõhumahuti ning efektiivne jahutussüsteem muudavad seadme usaldusväärseks lahenduseks töökohtades, kus on vajalik kõrge kuni 15-baarine töörõhk.
Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
Connection of up to eight compressors possible, no matter if with constant or variable speed
All information on current operating status at a glance
Rotation direction control for the motor, prevents damage during start-up or after a change of location
Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Star-delta switching as standard
Easy to service: simple removal and installation of all components requiring maintenance
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
Rotation direction control for the motor, prevents damage during start-up or after a change of location
High cooling effect and low noise level due to thermostatically controlled radial fan
Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
Aftercooler reduces the effort for drying and filtration of the generated compressed air
Easy to service: simple removal and installation of all components requiring maintenance
Latest generation IE4 permanent magnet motor for max. energy efficiency
Larger speed/load range
Larger delivery volume supply range
Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
Very quiet operation - only 64 dB
Energy saving through frequency control
Ideal for frequently changing compressed air consumption
Compressor delivery rate adjusts to actual consumption
Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
Advanced and efficient cutting-edge technology in the smallest possible space
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Compressed air lines and containers with a long service life
Comfort safety quick couplings for maximum work safety
Comfortable, back-friendly transport in an upright position and without lifting
Designed for demanding continuous use when oil-free and clean compressed air is required
Air is blown through the cooling chambers of the cylinder by means of a fan; thus optimum cooling is achieved
Large piston, movably mounted, resulting in 60% more power compared to tilt piston systems
Cylinder running surfaces with high-precision and micro-smooth surface for minimum friction
The high-performance piston or piston ring made of a graphite-Teflon-carbon special compound has a much longer service life than a simple piston ring made of Teflon
High-quality maximum equipment
Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous separation of dirt, oil and condensate
One compressed air outlet each for filtered compressed air, filtered and oiled compressed air and a direct outlet on the compressed air tank
Two comfort safety quick couplings
High-quality CONDOR pressure switch
One pressure gauge each for tank and working pressure
Simple condensate drain via ball valve
Compressed air lines and reservoirs with long service life
Flexible armored hose line with heat protection prevents vibration fractures
Inside and outside hot-dip galvanized, corrosion-protected compressed air reservoir with 15-year warranty against rusting through
Comfort safety quick couplings
One-hand safety couplings according to DIN EN 983 used by AIRCRAFT as the first manufacturer in series production
Two separate locking systems for maximum working safety
No whipping of the hose line during uncoupling
Convenient transport
Transport back-friendly in upright position and without lifting
Additional transport handle directly on the container
Puncture-proof PU foam wheels
Stable steering chassis with parking brake
Immediately ready for use
Fully automatic on-off operation
With all safety devices
Completely ready for connection
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
AIRPROFI 753/270/15 VK on professionaalne statsionaarne kolbkompressor integreeritud külmkuivatiga. Seadme imemisvõimsus on kuni 720 l/min ning efektiivne tootlikkus kuni 580 l/min. 270-liitrine suruõhumahuti ja kuni 15-barine töörõhk tagavad stabiilse, kuiva ja kvaliteetse suruõhu tööstus- ning töökojarakendustes.
ACS 3,5-10-100 kruvikompressor sobib pidevaks suruõhu tootmiseks töökodades ja tootmisruumides. 100-liitrine mahuti, 4 kW mootor ning kuni 360 l/min tootlikkus tagavad töökindla ja energiasäästliku kasutuse.
Aircraft A-PLUS 45-13 on professionaalne kruvikompressor 45 kW IE3 mootoriga, mis tagab kuni 5100 l/min õhutootlikkuse ja 13-barise töörõhu. Sobib suure õhutarbega tööstusettevõtetele ja tootmisliinidele.
EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
With star-delta switch
High cooling effect and lower noise level due to thermostatically controlled radial fan
Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
Easy maintenance due to easily accessible elements
Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
Small external dimensions, thus easy transport and installation
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Easy installation and accessibility of all maintenance positions
Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.
EasyTRONIC Micro II electronic control for reliability and efficiency
Prevents motor overload, reduces wear and makes for a longer service life
Monitoring of operating hours, temperature and motor overload
Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation
Optimized cooling system
Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature
User-friendly in all details
Low noise, suitable for deployment in any work environment
Small footprint facilitates transport and deployment
Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
All air and oil lines are made of heat-resistant rubber
Equipped with a star delta circuitry as factory standard
Ready to connect with all fittings and safety equipment
K models with Integrated refrigeration dryer
More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
Fully integrated into the housing
Ready for use without installation overhead
Equipped with control panel and time-controlled condensate drain
Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria info@aircraft.at
Aircraft A-PLUS 56-08 VS on sagedusmuunduriga kruvikompressor, mille tootlikkus on 3700-9300 l/min ja maksimaalne töörõhk 7,5 bar. Tõhus ja energiasäästlik lahendus tööstuslikele suruõhusüsteemidele.
