Suruõhutehnika

Tehnilised andmed:

• Mootori võimsus: 22 kW (30 HP)
• Maksimaalne töörõhk: 10 bar
• Õhutootlikkus: 790–3750 l/min
• Juhtimine: sagedusmuunduriga (Variable Speed Drive, VS)
• Mootori tüüp: püsimagnetmootor (PM), efektiivsusklass IE5
• Ülekanne: otsülekanne (direct drive)
• Kompressori tüüp: õliga määritud kruvikompressor
• Müratase: 63 dB(A)
• Mõõtmed (P × L × K): 1710 × 850 × 1370 mm
• Kaal: 650 kg

Peamised eelised:

• Püsimagnetmootor ja inverterjuhtimine vähendavad energiakulusid.
• Otsülekanne tagab väiksemad energiakaod ja suurema töökindluse.
• Kaasaegne LOGIN elektrooniline juhtsüsteem.
• Kompaktne ja vaikne konstruktsioon.
• Sobib pidevaks tööstuslikuks kasutamiseks ning muutuva suruõhuvajadusega rakendustele.

• Two-stage compression 2-cylinder high-performance unit with cast iron cylinder block
• The low speed ensures quiet, low-vibration operation and a long service life
• Large fan wheel for optimal cooling
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With phase inverter for easy manual reversal of the direction of rotation
• Intermediate and aftercooler reduces the formation of condensation
• Maintenance block with two pressure gauges for tank pressure and working pressure and high quality CONDOR pressure switch
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Fully automatic on-off operation
• Ready for connection with all fittings

Increased flexibility

• By connecting the second compressed air tank, the container volume is doubled, whereby a higher air supply can be established
• An increased demand for air can thus be covered in the short term.
• The second compressed air tank can be disconnected from the compressed air supply e.g. for chiselling or sandblasting. This halves the container volume and pressure builds up faster.

Equipment details:

• K version with refrigeration dryer with integrated automatic steam trap as standard
• Pressure dew point 5 °C, compressed air inlet temperature 35 °C, cooling air temperature 25 °C


• K version additionally with pre-filter for separating condensate and solid impurities with particles up to 1 μm
• Compressed air quality according to ISO 8573-1
• As a pre-filter in front of the refrigeration dryer


• KK version with automatic steam trap on the compressed air tank
• This condensate drainage without unnecessary pressure loss


• Condensate conditioner for oil-water separation

• Robust features and top quality
• Fully automatic on-off operation
• With all safety features
• Fully wired
• From 7.5 kW standard with automatic star-delta switch
• Fifteen-year rust-proof warranty on inside and outside hot-dip galvanized compressed air tank

Quality electric motor

• High quality electric motor with motor protection switch
• Start-up capacitor and start-up relief valve for easy start-up
• As standard with phase inverter for easy manual reversal of the direction of rotation

Compressed air compression via high-performance aggregate HOS

• The start-up relief valve ensures a light, pressureless start
• The two-cylinder high-performance cast iron unit and the low speed warranty a particularly quiet and low-vibration operation ; this ensures a long service life through minimized wear
• Optimal lubrication of the compressor for long service life and reliability
• Equipped with high-quality intake filter
• Aftercooler with large cooling fins causes low boiler inlet temperature and less humidity in the compressed air to protect the compressed air tools
• additionally with intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and longevity of the compressor.
• Optimal cooling of the compressor due to large Fan and cooling air guide on the cylinder
• Sturdy belt guard made of metal for optimum protection of the components and for high user safety
• No vibration breakage of the compressed air supply into the boiler due to flexible armored hose line with heat protection

High-quality drive belt

• Powerful and economical drive
• The toothed drive belt makes it easier to start, improves smoothness and power transmission, and reduces power consumption by up to 30%
• Sturdy metal belt guard

Service block operation

• Equipped with a high-quality CONDOR push button switch with a robust push button function for fully automatic on / off operation
• Air extraction on the maintenance block via a comfort -Safety quick coupling
• On the maintenance block only fixed screw connections, no hose connections

High-quality boiler with durable rust protection

• AIRCRAFT was the first manufacturer to do so The compressors of the AIRPROFI series are equipped as standard with internal and external hot-dip galvanized boilers. Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank.

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Two-cylinder high-performance unit made of grey cast iron with low speed guarantee particularly quiet and low-vibration operation -> less wear - longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Equipped with glycerine pressure gauge, operating hours counter and error display via LED lights

• Extremely quiet due to sound-insulated housing and additional silencer on the intake filter
• Suitable for installation even in noise-sensitive areas and the direct working environment
• Two-cylinder high-performance unit made of grey cast iron with low speed warrantys particularly quiet and low-vibration operation: less wear and longer service life
• Large fan impeller on the compressor and temperature-controlled radial fan on the housing ensure optimum cooling of the entire interior
• Inter- and aftercooler as well as an additional air duct between motor and compressor reduce condensate formation
• High-quality Condor pressure switch
• Equipped with glycerine pressure gauge, hour meter and fault indication via LED lights
• Quality electric motor with motor protection switch and start-up relief
• Facility for easy tensioning of the V-belt
• Service-friendly design
• Ready for connection with all fittings and safety devices

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and slide clamping system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

Tehnilised andmed:

• Maksimaalne töörõhk: 10 bar.
• Suruõhumahuti maht: 50 l.
• Imemisvõimsus: 390 l/min.
• Efektiivne tootlikkus: 285 l/min (6 bar juures).
• Mootori nimivõimsus: 2,76 kW.
• Väljundvõimsus: 2,2 kW.
• Toitepinge: 400 V / 50 Hz.
• Silindreid: 2.
• Surveastmeid: 1.
• Kompressori pöörlemiskiirus: 1470 p/min.
• Mõõtmed (P × L × K): 810 × 430 × 790 mm.
• Kaal: 56 kg.

• Innovative LOGIN control with 4.3" touch screen for easy operation and complete control over all functions
• Connection of up to eight compressors possible, no matter if with constant or variable speed
• All information on current operating status at a glance
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• Low noise emission (only max. 67 dB) during operation, due to extremely low speed of the screw compressor and use of a low-noise radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

• All main components of the compressor are manufactured by machining using numerically controlled machine tools, including suction regulator, separator block and minimum pressure valve
• The cooling takes place via a temperature-controlled centrifugal fan and an oversized combination cooler. This ensures optimal cooling even under the most extreme conditions.
• Generous access panels allow easy maintenance and immediate control of the internal components, reducing the time required for inspection and maintenance to one medium.
• The main operating parameters are monitored by the electronic microprocessor control NRG: In addition to the various functions, a weekly timer for switching on and off is available to meet the requirements of each customer. In addition, up to 4 machines can be controlled simultaneously according to the master / slave principle.
• Standard with star-delta connection

• Space-saving single compressor with ribbed belt drive
• With control ETM II including direction of rotation control
• Especially suitable for companies that have a continuous air requirement, but want a compact unit with a reduced noise level and low operating costs
• Standard supersonic insulation allows installation in sensitive rooms
• Intensive cooling warrantys operational safety and good air quality
• Standard with star-delta connection
• Ideal also suitable for supplementing existing systems, eg for covering the compressed air base load
• Standard with thermal motor protection, oil temperature monitoring (max 110 °C) and operating hours counter, ensuring high operational safety
• Service-friendly due to optimal accessibility and easy disassembly and assembly of all important components
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Rotation direction control for the motor, prevents damage during start-up or after a change of location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled centrifugal fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Easy to service: simple removal and installation of all components requiring maintenance

• Larger speed/load range
• Larger delivery volume supply range
• Extremely energy efficient - up to 50% energy consumption savings compared to a "fixed speed" model
• Very quiet operation - only 64 dB

• Ideal for frequently changing compressed air consumption
• Compressor delivery rate adjusts to actual consumption
• Electronic control monitors motor and compressor speed and keeps line pressure constant even when consumption fluctuates widely
• Advanced and efficient cutting-edge technology in the smallest possible space

Tehnilised andmed:

• Kompressori tüüp: statsionaarne õliga määritav kruvikompressor
• Mootori võimsus: 18,5 kW
• Mootori efektiivsusklass: IE4 püsimagnetmootor (PM)
• Tootlikkus: 570-3500 l/min
• Maksimaalne töörõhk: 7,5 bar
• Õhuväljalase: 1 1/4"
• Õlikogus: 15 l
• Toitepinge: 400 V / 50 Hz
• Mootori pöörlemiskiirus: 3000 p/min
• Sagedusjuhtimine (VS): jah
• Juhtsüsteem: LOGIN elektrooniline juhtimine 4,3" puuteekraaniga
• Müratase: 63 dB(A)
• Mõõdud: 1330 × 850 × 1370 mm
• Kaal: 475 kg

• Innovative LOGIN control with 4.3" touch screen for easy operation and full control of all functions.
• Energy-efficient IE4 motor
• Rotation direction control for the motor, prevents damage during start-up or after a change of stand location
• High cooling effect and low noise level due to thermostatically controlled radial fan
• Optimum operating temperature and low fluctuation of oil temperature due to thermostatically controlled radial fan, optimum cooling air flow and generously dimensioned heat exchangers
• Aftercooler reduces the effort for drying and filtration of the generated compressed air
• Star-delta switching as standard
• Easy to service: simple removal and installation of all components requiring maintenance

A-PLUS 55-10 on suure jõudlusega tööstuslik kruvikompressor, mis on mõeldud pidevaks kasutamiseks tootmises, töökodades ja suruõhusüsteemides. Helisummutatud korpus, vastupidavad CNC-töödeldud komponendid ning NRG mikroprotsessorjuhtimine tagavad kõrge töökindluse, lihtsa hoolduse ja stabiilse suruõhuvarustuse.

Tehnilised andmed:

• Efektiivne tootlikkus: 7800 l/min
• Maksimaalne töörõhk: 10 bar
• Mootori võimsus: 55 kW
• Toitepinge: 400 V
• Faaside arv: 3~
• Sagedus: 50 Hz
• Õhuühendus: 1½"
• Õlikogus: 22,5 l
• Müratase: 74 dB(A)
• Mõõtmed (P × L × K): 1600 × 970 × 1860 mm
• Netokaal: 952 kg
• Kompressori tüüp: õliga määritav
• Paigaldusviis: statsionaarne

Komplekti kuulub:

• Kruvikompressor A-PLUS 55-10
• NRG mikroprotsessorjuhtimine
• Täht-kolmnurk käivitus
• Integreeritud kombijahuti
• Temperatuuriga juhitav tsentrifugaalventilaator

Tehnilised andmed:

• Kompressori tüüp: rihmülekandega, vertikaalne kolbkompressor
• Mootori võimsus: 4,8 kW
• Toitepinge: 400 V
• Imitootlikkus: 620 l/min
• Efektiivne tootlikkus: 520 l/min
• Maksimaalne töörõhk: 10 bar
• Mahuti maht: 270 l
• Silindrite arv: 2, kaheastmeline kompressorplokk
• Kaal: 139 kg
• Pakendi mõõtmed: 860 × 860 × 2000 mm

Peamised omadused:

• Kaheastmeline malmist 2-silindriline kompressorplokk.
• Suur jahutusventilaator ja silindrite jahutusõhu suunaja optimaalseks jahutuseks.
• Järeljahuti ja vahejahuti vähendavad niiskuse hulka suruõhus.
• Kvaliteetne CONDOR rõhulüliti ja mootorikaitse.
• 10-aastane garantii pulbervärvitud suruõhumahuti läbiroostetamise vastu.
• Täielikult komplekteeritud ja ühendusvalmis (elektriühenduse peab teostama kvalifitseeritud elektrik).

A-PLUS 11-13 on professionaalne kruvikompressor pidevaks kasutamiseks tööstuses ja töökodades. Seade on loodud 100% koormusega tööks ning tagab kõrge töökindluse, madala mürataseme ja pika kasutusea. EasyTRONIC MICRO II elektrooniline juhtimine koos rõhuanduriga aitab vältida mootori ülekoormust ning vähendab hoolduskulusid.

Tehnilised andmed:

• Efektiivne tootlikkus: 1100 l/min
• Maksimaalne töörõhk: 13 bar
• Mootori võimsus: 11 kW
• Toitepinge: 400 V
• Sagedus: 50 Hz
• Õhuühendus: 3/4"
• Müratase (Lp): 69 dB(A)
• Mõõtmed (P × L × K): 800 × 650 × 980 mm
• Netokaal: 210 kg
• Kompressori tüüp: õliga määritav
• Paigaldusviis: statsionaarne
• Rihmülekanne: Poly-V ribirihm

Komplekti kuulub:

• Kruvikompressor A-PLUS 11-13
• EasyTRONIC MICRO II juhtsüsteem
• Täht-kolmnurk käivitusseade
• Integreeritud järeljahuti
• Termostaadiga juhitav jahutusventilaator

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

• The two-stage, high performance, 2-cylinder unit provides very low RPM for smooth, low-vibration operation
• Large fan for optimal cooling
• Between- and aftercooler for a low tank inlet temperature and reduction of condensation
• High quality electric motors equipped with motor protection switch
• Ready for connection with all fittings such as safety valve and check valve, condensate and air release valve for autonomous operation
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• High quality CONDOR pressure switch for fully automatic on-off operation
• Flexible armored hose line with heat protection prevents vibration break

Compressor compressors are used when:

• the available air volume is too small
• Peak performance needs to be met
• 10 0% safety must be warrantyd
• Old equipment would require expensive repairs

• Our 15 bar compressors are factory set to 13 bar shutdown pressure. The reason for this is that, according to experience, 90% of all users have an operating pressure of max. 13 bar
• Any additional pressure generated means an energy consumption of about 8% per bar.
• If you still need the maximum pressure of 15 bar, you can easily do it yourself at any time at the pressure switch.

Tehnilised andmed:

• Kompressori tüüp: statsionaarne õliga määritav kruvikompressor
• Mootori võimsus: 18,5 kW
• Mootori efektiivsusklass: IE4 püsimagnetmootor (PM)
• Tootlikkus: 660-3050 l/min
• Maksimaalne töörõhk: 10 bar
• Õhuväljalase: 1 1/4"
• Õlikogus: 15 l
• Toitepinge: 400 V / 50 Hz
• Mootori pöörlemiskiirus: 3000 p/min
• Sagedusjuhtimine (VS): jah
• Juhtsüsteem: LOGIN elektrooniline juhtimine 4,3" puuteekraaniga
• Õlijahuti: jah
• Otseajam: jah
• Müratase: 63 dB(A)
• Mõõdud: 1330 × 850 × 1370 mm
• Kaal: 475 kg

• EasyTRONIC MICRO II electronic control with pressure sensor operation as standard, thus preventing motor overload, reducing wear and extending service life
• With star-delta switch
• High cooling effect and lower noise level due to thermostatically controlled radial fan
• Operating hours counter records load and overrun times, thus ensuring compliance with maintenance intervals - Indication of maintenance requirement via automatic message
• Rotation direction control for the motor avoids possible damage during commissioning or after a change of location
• Screw compressor with wear-resistant Poly V ribbed belt drive and carriage tensioning system
• Easy maintenance due to easily accessible elements
• Optimum operating temperatures due to thermostatically controlled fan, optimum cooling air flow and generously dimensioned heat exchanger, thus longer service life, lower fluctuations in oil temperature than with thermostat control
• Aftercooler as standard, thus less effort for drying and filtration of the generated compressed air
• Small external dimensions, thus easy transport and installation