GRAPHITE metal drill with 4.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Set of masonry drills GRAPHITE (Ref. 57H570) with diameters range 6.0 to 10.0 mm and SDS plus shank, allow for efficient drilling in concrete and ceramic materials by hammer drill .
Solid carbide saw blade GRAPHITE (ref. no. 55H603) with diameters 160 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Velcro sand paper GRAPHITE (ref. no. 55H726) with dimensions 115 x 230 mm and granulation 240, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 3.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Masonry drill VERTO (ref no. 60H192) with 8.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Masonry drill VERTO (ref no. 60H180) with 12.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Fibra sanding disc GRAPHITE (ref. no. 55H855) with outer diameter 125 mm and granulation 40. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H610) with diameters 210 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Abrasive sponge GRAPHITE (ref. no. 55H920) with dimensions 70 x 25 x 10 mm and granulation 180. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 3.2 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
The GRAPHITE impact bit set (ref. 56H562) includes 10 bits PH1/2/3, PZ1/2/3, TX25/27/30/40, total length 50 mm. These are durable bits designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Set with a carabiner for attaching to the belt loop. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Fibra sanding disc GRAPHITE (ref. no. 55H857) with outer diameter 125 mm and granulation 80. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 12.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H055) with diameters 10.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Solid carbide saw blade GRAPHITE (ref. no. 55H611) with diameters 250 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for cutting oaluminium materials. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Sanding cloth GRAPHITE (ref. no. 55H879) in a sheet with dimensions 230 x 280 mm and granulation 150. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Angle sanding sponge GRAPHITE (ref. no. 55H927) with dimensions 98 x 25 x 68 mm and granulation 180. Designed for finishing work. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on four sides of the sponge. The sponge shape fits well in your hand. The abrasive sponge has one oblique side and one curved side, which make hard-to-reach places easily accessible for processing. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Masonry drill VERTO (ref. no. 60H657) with SDS+ shank 14.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
