GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
Velcro sand paper GRAPHITE (ref. no. 55H737) with dimensions 93 x 185 mm and granulation 60, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 5.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Blade for reciprocating saw GRAPHITE about the length 240 mm and 2 with teeth an inch long used for cutting cellular concrete, brick, cement board, plasterboard using saber saws. The maximum thickness of the materials is 150 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Delta sanding paper GRAPHITE (ref. no. 55H764), size 93 x 93 mm and granulation K60. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE impact bit set (ref. 56H560) includes 36 pieces, containing 16 bits PH1/2/2/2/3, PZ1/2/2/3, T10/15/20/25/27/30/40 o total length 25 mm, 14 bits PH1/2/2/2/3, PZ1 /2/2/2/3, HEX3/4/5/6 with a total length of 50 mm, a handle, three sockets and two adapters. These are durable bits designed for heavier work with high torque using screwdrivers or impact drivers. Made of high-quality S2 steel, which is characterized by increased flexibility and resistance to mechanical damage. The torsion zone, rotating under the influence of high torque, reduces the transmission of force, which makes the bit more resistant to breakage, and its service life is extended several times. The working tip of the tip guarantees a perfect fit. Everything is placed in a closed plastic box with rubberized edges. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 6.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H042-10) with diameters 7.0 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Solid carbide saw blade GRAPHITE (ref. no. 55H600) with diameters 185 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Masonry drill VERTO (ref no. 60H194) with 10.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Sanding paper GRAPHITE (ref. no. 55H750) with dimensions 93 x 230 mm and granulation 100, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging . Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding net GRAPHITE (ref. no. 55H745) with granulation K120, made of abrasive net with diameter 225 mm fastened with velcro, used for grinding plaster and gypsum finishing with drywall sanders. Placing the abrasive on the mesh reduces the clogging of the disc with the ground material, thanks to which they have a longer life than sandpaper discs. The cloth’s open coating (50-60% of the cloth surface is covered with abrasive grain) guarantees greater resistance of the grain surface to clogging with abrasive dust. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE jigsaw blades are used for precise cutting of wood and plastic. T shank allows to use the blades in all jigsaws with BOSCH holder and universal holder. Use of CrV steel (chromium-vanadium) gives high elasticity and resistance to high temperatures.
Water abrasive paper GRAPHITE (ref. no. 55H900) in a sheet with dimensions 230 x 280 mm and granulation 150. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Delta sanding paper GRAPHITE (ref. no. 55H763), size 93 x 93 mm and granulation K40. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 6.5 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metal drills GRAPHITE (ref. no. 57H022-10) with diameters 3.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
Masonry drill VERTO (ref no. 60H172) with 4.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
