Masonry drill VERTO (ref. no. 60H650) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
GRAPHITE Forked Saw Blade (Ref. 55H692) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with ATB (alternate) geometry for rough cutting of wood and wood based materials such as plywood, chipboard, MDF. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the needs of professionals.
Delta sanding paper GRAPHITE (ref. no. 55H765), size 93 x 93 mm and granulation K80. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE Turbo diamond disc thanks to hot pressed Turbo type segments is perfect for heavy duty construction tasks. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.
Masonry drill VERTO (ref no. 60H196) with 12.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Sanding cloth GRAPHITE (ref. no. 55H882) in a sheet with dimensions 230 x 280 mm and granulation 240. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H863) in a roll, 2.5 m long, 115 mm wide and granulation 120. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Masonry drill VERTO (ref. no. 60H630) with SDS+ shank 12.0 mm diameter, tip with fine grit sintered carbide allows to efficiently drill holes in concrete. Double S4 flute ensures proper drillings extraction and protects the drill against overheating. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Sanding cloth GRAPHITE (ref. no. 55H868) in a roll, 2.5 m long, 115 mm wide and granulation 60. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Fibra sanding disc GRAPHITE (ref. no. 55H851) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
HSS metallipuuride komplekt sisaldab 10 kvaliteetset 4,0 mm läbimõõduga puuri, mis on mõeldud metalli töötlemiseks. Puurid on valmistatud vastupidavast 4241 kiirlõiketerasest (HSS), mis tagab hea töökindluse ja kulumiskindluse. 118° tipunurk ning ristterakorrektsioon võimaldavad täpset puurimise alustamist ja sujuvat tööprotsessi. Puurid vastavad DIN 338 standardile.
HSS metallipuuride komplekt sisaldab 10 kvaliteetset 3,0 mm läbimõõduga puuri, mis on mõeldud metallide puurimiseks. Puurid on valmistatud 4241 kiirlõiketerasest (HSS), mis tagab hea vastupidavuse ja töökindluse igapäevasel kasutamisel. 118° tipunurk koos ristterakorrektsiooniga võimaldab täpset puurimise alustamist ning vähendab puuri kõrvalekaldumise ohtu. Vastavad DIN 338 standardile.
Sanding paper GRAPHITE (ref. no. 55H887) in a sheet with dimensions 230 x 280 mm and granulation 80. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE guide rail enabling parallel penetration of the cutting disc and free and even guidance of the saw-digger. The high-quality aluminum strip is equipped with a rubber anti-splinter insert, teflon slides, and a special anti-slip tape mounted on the underside of the strip, which significantly increases comfort and safety of work. On the first use, the rubber bar will automatically adjust to the tool used. It is possible to attach the rail to the surface using dedicated clamps, which allows precise and accurate cutting of the material. The attached strip to the cut surface allows the user to focus on the work to achieve the desired cutting effect. Thanks to specially profiled grooves, the clamps do not interfere during work. The guide rail is dedicated for use together with the GRAPHITE circular saw
Pro-Tec HSS-CNC metallipuuride komplekt sisaldab 25 kvaliteetset metallipuuri mõõtudega 1,0–13,0 mm, pakkudes täielikku valikut enamlevinud puurisuurusi professionaalseteks metalli- ja plastitöödeks. Komplekt sobib suurepäraselt töökojale, tootmisse, ehitusobjektile ning nõudlikule kodukasutajale.
Puurid on valmistatud vastupidavast HSS kiirlõiketerasest ning varustatud 124° tipugeomeetriaga, mis tagab täpse tsentreerimise, sujuva puurimise alguse ja stabiilse juhtimise. Tänu kvaliteetsele töötlusele on puurid kulumiskindlad ning tagavad puhtad ja täpsed puurimistulemused erinevates materjalides.
GRAPHITE abrasive papers are used for rough sanding of wood and metal surfaces. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system.
Solid carbide saw blade GRAPHITE (ref. no. 55H607) with diameters 315 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
