Takjakinnitusega lihvkettad on mõeldud kasutamiseks kipsi- ja seinapindade lihvijatega. Kettad läbimõõduga 225 mm ja karedusega K180 sobivad peenviimistluseks ning pindade ettevalmistamiseks enne värvimist või muud lõppviimistlust. Ketta kogu pinnal paiknevad tolmueemaldusavad aitavad lihvimistolmu tõhusalt eemaldada, tagades puhtama töökeskkonna ja parema tööefektiivsuse. Takjakinnitus võimaldab kulunud ketaste kiiret ja mugavat vahetamist.
Solid carbide saw blade GRAPHITE (ref. no. 55H604) with diameters 180 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
GRAPHITE metal drill with 4.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Metallipuuride komplekt sisaldab 13 kvaliteetset metallipuuri läbimõõduga 1,5–6,5 mm. Kõrglegeerterasest (HSS) CNC-lihvitud puurid tagavad täpse puurimise ning pika kasutusea. 124° tipunurk parandab tsentreerimist ja muudab aukude puurimise metalli sisse kiiremaks ning täpsemaks. Sobib kasutamiseks terases, värvilistes metallides ja muudes metallmaterjalides.
GRAPHITE bimetal hole cutter with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials.
Water abrasive paper GRAPHITE (ref. no. 55H896) in a sheet with dimensions 230 x 280 mm and granulation 60. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding paper GRAPHITE (ref. no. 55H893) in a sheet with dimensions 230 x 280 mm and granulation 220. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H023-10) with diameters 3.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
HSS-G metallipuuride komplekt sisaldab 10 kvaliteetset 6,0 mm läbimõõduga puuri, mis on valmistatud kiirlõiketerasest (HSS-G) sügavlihvimise tehnoloogiat kasutades. Tänu 135° tipunurgale ja ristterakorrektsioonile võimaldavad puuriterad täpset puurimise alustamist ilma eelneva täkestamiseta. Sobivad terase, puidu ja plastide töötlemiseks.
Sanding paper GRAPHITE (ref. no. 55H862) in a roll, 2.5 m long, 115 mm wide and granulation 100. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Solid carbide saw blade GRAPHITE (ref. no. 55H606) with diameters 300 mm, made of MN65 manganese steel alloy with high resistance to temperature and deformations. Teeth with sintered carbide tips YG6A are designed for rough cutting of wood and wood like materials, like plywood, chipboard, MDF. Thanks to included adapter rings it is possible to use the blade in most of saw models.
Sanding paper GRAPHITE (ref. no. 55H866) in a roll, 2.5 m long, 115 mm wide and granulation 220. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Masonry drill VERTO (ref no. 60H178) with 10.0 mm diameter. Tipped with fine grit sintered carbide and enhanced resistance to high temperature. Grinded drill flute reduces drilling forces. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Abrasive sponge GRAPHITE (ref. no. 55H913) with dimensions 120 x 95x 10 mm and granulation 100. Designed for finish grinding. Perfectly suitable for manual grinding and smoothing of putty, finish coats, gypsum, paints, plastics, wood, metal and varnish coatings. Suitable for wet and dry processing. Abrasive grain coating on both sides of the sponge. Thanks to its soft structure, the sponge adapts perfectly to the shape of ground surfaces. The sponge can be cut into smaller pieces to process hard-to-reach areas. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H028-10) with diameters 4.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE sabre saw blades have teeth of high speed steel. Combination of high speed steel with chromium vanadium steel allows to use the blades for cutting of all pieces made of steel, stainless steel, plastic and wood. Combination of these two steel types guarantees unique blade flexibility, which allows to work with bent blade. Therefore, it is possible to make cuts in hard to reach areas.
Velcro sand paper GRAPHITE (ref. no. 55H725) with dimensions 115 x 230 mm and granulation 180, with holes. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. Velcro fastening allows quick replacement of used abrasive disc. Designed for mounting on orbital grinders. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Fibra sanding disc GRAPHITE (ref. no. 55H856) with outer diameter 125 mm and granulation 60. Dedicated to grinding metal, steel, plastic, wood and even finishing putty. Ideally suited for deburring, removing rust and processing of welds. The disc with close coating. 100% of the disc surface is covered with abrasive grain (alumina), which guarantees greater processing accuracy and increased working efficiency. The disc is mounted to an angle grinder using a dedicated flexible disc. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding cloth GRAPHITE (ref. no. 55H871) in a roll, 2.5 m long, 115 mm wide and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
GRAPHITE metal drill with 8.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
