Sanding paper GRAPHITE (ref. no. 55H865) in a roll, 2.5 m long, 115 mm wide and granulation 180. Dedicated to grinding gypsum, finishing putty, wood, paint and varnish. The abrasive paper with D-paper backing designed for mechanical and manual grinding. The paper’s open coating (50-60% of the paper surface is covered with abrasive grain (white fused alumina)) guarantees greater resistance of the grain surface to clogging with abrasive dust . The product designed to be used with orbital grinders and sanding trowels. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Set of flat wood drills VERTO (Ref. 60H804) with diameters from 6.0 mm to 25 mm, thanks to the special profile blades allow double the drilling speed and avoid the effect of pulling the material. Hexagonal grip, allows the use in magnetic holders in cordless drills.
Sanding cloth GRAPHITE (ref. no. 55H873) in a sheet with dimensions 230 x 280 mm and granulation 36. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Blade for reciprocating saw GRAPHITE about the length 228 mm and 6 with teeth an inch long used for cutting fiber-cement, plasterboard, concrete, fiberglass and resin reinforced composites with saber saws. The maximum thickness of the materials is 175 mm. It is used in renovation, construction and demolition works as well as in home amateur work. It enables straight cutting. The saw blade produces less dust when cutting compared to traditional methods. Enables cutting close to the edge and in hard-to-reach places.
Delta sanding paper GRAPHITE (ref. no. 55H767), size 93 x 93 mm and granulation K120. Dedicated to grinding wood, wood-based materials, metals and plastics. Hook and loop fastener allows for quick replacement of worn out paper. Holes allow for nearly dust-free operation with tools equipped with dust extraction system. Product with E-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (aluminium oxide)) guarantees greater working efficiency and reduces the risk of clogging. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Takjakinnitusega lihvkettad on mõeldud kipsi- ja pahtelpindade lihvimiseks pika varrega lihvijatega. 225 mm läbimõõduga ja K80 karedusega kettad sobivad materjali intensiivsemaks eemaldamiseks, pindade tasandamiseks ning ettevalmistustöödeks enne peenlihvimist. Ketta kogu pinnale paigutatud perforatsioon võimaldab lihvimistolmu tõhusat eemaldamist, vähendab pinna ülekuumenemist ning pikendab lihvketta kasutusiga. Takjakinnitus tagab kiire ja mugava ketaste vahetamise.
Sanding paper GRAPHITE (ref. no. 55H891) in a sheet with dimensions 230 x 280 mm and granulation 180. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
VERTO bimetal hole cutter diameter 83 mm with progressive teeth made of high speed steel allows for efficient cutting of precise holes in steel, stainless steel, wood, plastics and composite materials. VERTO brand offers power tool and accessories assortment for all DIY enthusiasts.
Sanding paper GRAPHITE (ref. no. 55H889) in a sheet with dimensions 230 x 280 mm and granulation 120. Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive paper with C-paper backing designed for mechanical grinding. The paper’s semi-open coating (80-90% of the paper surface is covered with abrasive grain (alumina)) guarantees greater working efficiency and reduces the risk of clogging. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding net GRAPHITE (ref. no. 55H744) with granulation K80, made of abrasive net with diameter 225 mm fastened with velcro, used for grinding plaster and gypsum finishing with drywall sanders. Placing the abrasive on the mesh reduces the clogging of the disc with the ground material, thanks to which they have a longer life than sandpaper discs. The cloth’s open coating (50-60% of the cloth surface is covered with abrasive grain) guarantees greater resistance of the grain surface to clogging with abrasive dust. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Metal drills GRAPHITE (ref. no. 57H015) with diameters 2.2 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
GRAPHITE metal drill with 9.0 mm diameter is made of high quality alloy of high speed steel. 124° point angle and chisel edge correction allow for easy drilling without punching. Designed for fast and efficient drilling in steel workpieces.
Tolmukottide komplekt, mis on mõeldud kasutamiseks GRAPHITE 59G608 märg-/kuivtolmuimejaga. Komplekt sisaldab viit kvaliteetsest mikrokiudmaterjalist tolmukotti, mis tagavad tõhusa tolmu kogumise ja aitavad hoida tolmuimeja filtrisüsteemi puhtamana.
Mikrokiudmaterjal pakub paremat vastupidavust ja peenosakeste kinnipüüdmist võrreldes tavapäraste paberkottidega. Tolmukotid sobivad kuivade jäätmete ja peentolmu kogumiseks ehitus-, remondi- ning töökojarakendustes.
Metal drills GRAPHITE (ref. no. 57H056-5) with diameters 10.5 mm are made of high quality M35 HSS alloy with 5% cobalt additive. 135° point angle and chisel edge correction allow for easy drilling without punching. Thanks to alloy resistance to high temperature, the drills are perfect for drilling holes in hardly machinable materials, like stainless steel, acid resistant steel, heat resistant steel etc.
NEO set of 1/4" driver bits includes 32 pieces. Thanks to use of S2 alloy steel, the hardness of driver bits is 60 HRC, which substantially improves life time and quality of work. Set contains wide range of 25 mm driver bits: flat, cross, hexagonal, Torx and Torx tamperproof. Driver bits have magnetic blades. The set also includes bit holder and socket adapter. TÜV Rheinland certificate guarantees high quality and reliability of the product. NEO brand meets expectations of professionals.
GRAPHITE Widia Saw Blade (Ref. 55H695) 235mm outside diameter, made from C50 special steel with increased wear and warp resistance. Tungsten carbide teeth with TCG (trapezoidal) geometry for efficient cutting of aluminium materials. The included reduction rings allow the blade to be used with most saw models. The GRAPHITE brand offers a wide range of power tools to meet the requirements of professionals.
GRAPHITE segmented diamond disc thanks to hot pressed segments is perfect for heavy duty construction tasks. Highly resistant diamond segments allow for efficient cutting pieces made of concrete, reinforced concrete, granite, marble, stone, brick etc.
Water abrasive paper GRAPHITE (ref. no. 55H898) in a sheet with dimensions 230 x 280 mm and granulation 100. Designed mainly for wet varnish and plastic grinding applications in automotive industry as well as wood and metal processing. The abrasive paper’s backing is a very flexible latex paper which perfectly adapts to the workpiece. Close coating (100% of the paper surface is covered with abrasive grain) guarantees increased durability and processing accuracy. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
Sanding cloth GRAPHITE (ref. no. 55H881) in a sheet with dimensions 230 x 280 mm and granulation 220.Dedicated to grinding wood, wood-based materials, metals and plastics. The abrasive cloth with J-cloth backing designed for mechanical and manual grinding. The cloth’s close coating (100% of the cloth surface is covered with abrasive grain (alumina)) guarantees greater processing accuracy and the highest efficiency when processing hard materials. The product designed to be used with orbital grinders, trowels and sanding blocks. The GRAPHITE brand offers a wide range of power tools that meet the requirements of professionals.
