UUED TOOTED

Sorteerimine

Kuva leheküljel

Takjakinnitusega lihvkettad 225 mm, aukudega, P120, 5 tk

02-58T274

Sanding discs, perforated, Velcro with holes 225 mm, P120, 5 pieces 58T274 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.

7,44€ 9,30€

Laost otsas. Tellides tarneaeg nädalat

HSS-TiN metallipuuride komplekt 4,0–10,0 mm, 5 tk

03-57196

Komplektis 5 metallipuuri
Läbimõõdud vahemikus 4,0–10,0 mm
Materjal: HSS (kiirlõiketeras)
Titaannitriidkate (TiN) suurema vastupidavuse tagamiseks
Väiksem hõõrdumine ja kiirem puurimine
Kõrge kulumiskindlus
Täpne ja puhas puurimistulemus
Sobib professionaalseks ja hobikasutuseks

14,24€ 17,79€

Laost otsas. Tellides tarneaeg nädalat

S1 PS SR FO work boots, composite toecap, Kevlar insole, size 42

03-8215642

51,36€ 64,19€

Laost otsas. Tellides tarneaeg nädalat

Spiraalpuidupuur 14 x 230 mm

02-54T554

The spiral wood drill, 14 x 230 mm 54T554 by GRAPHITE is a drill bit designed for working with wood and plywood, equipped with a hexagonal chuck, and with a spiral design. It features a diameter of 14 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.

2,72€ 3,40€

Laost otsas. Tellides tarneaeg nädalat

S1 SR FO work boots, cable tie with knob, size 43

03-8217443

The NEO TOOLS S1 SR FO work boots, rope binding with knob, size 43, 82-174-43 by NEO TOOLS are footwear that features a rope binding with knob for quick and precise adjustment. The upper is made of leather and polyester knit, the lining is made of knitted mesh and the sole is made of polyurethane (PU/PU) - guaranteeing the robustness of the model. The HI-POLY foam insole, in turn, ensures a high level of comfort. NEO TOOLS footwear has a composite toecap protecting against impacts with an energy of 200 J. The model belongs to the S1 SR FO category - characterised by resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). The product is CE certified

44,00€ 54,99€

Laost otsas. Tellides tarneaeg nädalat

Turbo teemantlõikeketas 115 × 22,22 mm, kuiv- ja märglõikuseks

02-57T316

Turbo diamond cut-off wheel, 115 x 22.2 mm, dry and wet 57T316 by GRAPHITE is a dry and wet turbo diamond cut-off wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.

2,01€ 2,50€

Laost otsas. Tellides tarneaeg nädalat

OUTDOOR work trousers, jogger type, green, size XL

03-81286XL

OUTDOOR work trousers, jogger type, green, size XL 81-286-XL by NEO TOOLS are green trousers characterised by a dobby weave fabric of 80% cotton, 17% polyester and 3% spandex. The weight is 280 g/m2. Equipped with an elastic waistband, as well as a zip and button fastening. NEO TOOLS trousers have ergonomic front pockets, additional zipped thigh pockets and space pockets above the knee. The profiled knee provides greater comfort. The leg hem with stopper guarantees freedom of movement, as well as protection against wind and cold. The tool clip, on the other hand, provides more storage and easy access to accessories. NEO TOOLS trousers have a printed logo on the pocket patch above the knee, as well as a name tag for better personalisation. The OUTDOOR jogger type work trousers are a unique in-house design by NEO TOOLS.

31,77€ 39,70€

Laost otsas. Tellides tarneaeg nädalat

Metallipuuride komplekt HSS-G 2–8 mm, 13 tk

02-54T920

HSS-G metallipuuride komplekt sisaldab 13 kvaliteetset metallipuuri läbimõõtudega 2,0–8,0 mm, mis sobivad täpseks ja efektiivseks puurimiseks erinevates metallmaterjalides. Puurid on valmistatud kvaliteetsest HSS-G kiirlõiketerasest, mis tagab suure kulumiskindluse, täpsuse ja pika kasutusea.

Tänu täppislihvitud lõikeservadele võimaldavad puurid kiiret ja puhast puurimist ning sobivad kasutamiseks nii professionaalidele kui ka nõudlikele kodukasutajatele. Komplekt sisaldab enimkasutatavaid mõõte, mis katavad suure osa igapäevastest metallitöödest.

Komplekti kuuluvad puuride mõõdud:

2,0 mm

2,5 mm

3,0 mm

3,5 mm

4,0 mm

4,5 mm

5,0 mm

5,5 mm

6,0 mm

6,5 mm

7,0 mm

7,5 mm

8,0 mm

Omadused:

Komplektis 13 metallipuuri
Läbimõõdud: 2,0–8,0 mm
Materjal: HSS-G
Täpne ja puhas puurimistulemus
Kõrge kulumiskindlus
Silindriline vars
Sobib professionaalseks ja hobikasutuseks

6,16€ 7,70€

Laost otsas. Tellides tarneaeg nädalat

Turbo teemantlõikeketas 125 × 22,22 mm, kuivlõikuseks

02-57T317

Turbo diamond cutting wheel, 125 x 22.2 mm, dry 57T317 by GRAPHITE is a turbo dry cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.

2,88€ 3,60€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus kahe spiraaliga kivipuur 10 × 350 mm

02-56T119

Kinnitus: SDS Plus
Tüüp: kahe spiraaliga kivipuur
Läbimõõt: 10 mm
Kogupikkus: 350 mm
Tööpikkus: 265 mm
Spiraal: kahekordne spiraal
Sobivad materjalid: betoon, tellis, kivi

2,41€ 3,00€

Laost otsas. Tellides tarneaeg nädalat

Work shoes S1 SR FO, composite toecap, size 44

03-8215544

Half work boots, S1 SR FO, composite toecap, size 44, CE, 82-155-44 by NEO TOOLS are professional footwear that protects the foot against cold, softening and water soaking. The footwear is very comfortable, does not contain metal elements which makes the shoes lighter and undetectable at metal gates. An anti-slip sole with a shock-absorbing system, resistant to abrasion, oil, petrol and other organic solvents (FO), as well as a composite insole, reinforced toecap and back of the shoe are not all the advantages of this product. The anti-electrostatic properties of the insole further enhance the model's usability. The shoes are lightweight and have a fashionable design and are CE certified and EN ISO 20345:2022 compliant.

48,88€ 61,09€

Laost otsas. Tellides tarneaeg nädalat

Teemantlõikeketas 180 × 25,4 mm, märglõikuseks

02-57T303

The GRAPHITE 57T303 solid diamond cutting wheel, 180 x 25.4 mm, wet 57T303 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.2 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.

5,68€ 7,11€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvkettad 125 mm, P80, 5 tk, 8 avaga

02-58T290

Velcro sanding discs 125 mm, P80, 5 pieces, with 8 holes 58T290 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.

0,967€ 1,20€

Laost otsas. Tellides tarneaeg nädalat

Klaasipuur 4 mm

02-54T412

Glass drill bit 4 mm 54T412 by GRAPHITE characterised by a diameter of 4 mm and an overall length of 68 mm. Equipped with a 3.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.

1,67€ 2,10€

Laost otsas. Tellides tarneaeg nädalat

S1 SR FO work boots, cable tie with knob, size 41

03-8217441

The NEO TOOLS S1 SR FO work boots, rope binding with dial, size 41, 82-174-41 by NEO TOOLS are footwear that features a rope binding with a dial for a quick and precise fit. The upper is made of leather and polyester knit, the lining is made of knitted mesh and the sole is made of polyurethane (PU/PU) - guaranteeing the robustness of the model. The HI-POLY foam insole, in turn, ensures a high level of comfort. NEO TOOLS footwear has a composite toecap protecting against impacts with an energy of 200 J. The model belongs to the S1 SR FO category - characterised by resistance to slipping on ceramic ground covered with sodium lauryl sulphate solution (SLS). The product is CE certified

44,00€ 54,99€

Laost otsas. Tellides tarneaeg nädalat

Universaaltööriista süvislõiketera, BIM Co 8%, 65 mm

02-57T503

The GRAPHITE 57T503 plunge-cutting, BIM Co 8%, 65 mm blade 57T503 is a tool for multifunction machines with a blade width of 65 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 40mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.

4,32€ 5,39€

Laost otsas. Tellides tarneaeg nädalat

Printed T-shirt, FEEL THE BIT, size M

03-81641M

Printed T-shirt, FEEL THE BIT, size M 81-641-M by NEO is a work t-shirt with multicoloured contrasting bit graphics and the wording FEEL THE BIT. The t-shirt is grey in colour. The large print on the front combined with the slogan is a humorous play on words, showing the distance of the wearer of this unique t-shirt. It has short sleeves and a round neckline with elasticated piping. It has been produced in a soft cotton knit (100%) with a weight of 180 g/m2. The brand's unique in-house design, as well as the logo and name tag printed on the neck, make this the perfect t-shirt for almost any occasion - for work and for casual walking. NEO brand clothing is CE certified and recommended for fans of motoring and DIY.

9,28€ 11,59€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus kahe spiraaliga kivipuur 8 × 210 mm

02-56T110

Kinnitus: SDS Plus
Tüüp: kahe spiraaliga kivipuur
Läbimõõt: 8 mm
Kogupikkus: 210 mm
Tööpikkus: 140 mm
Spiraal: kahekordne spiraal
Sobivad materjalid: betoon, tellis, kivi

1,28€ 1,60€

Laost otsas. Tellides tarneaeg nädalat

Ketashari 80 mm, laineline messingkattega traat, 6 mm vars

02-57T405

The 80 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T405 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.

1,36€ 1,70€

Laost otsas. Tellides tarneaeg nädalat

Volframkarbiid-augusaag 53 mm

02-56T740

GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.

5,52€ 6,89€

Laost otsas. Tellides tarneaeg nädalat