UUED TOOTED

Vaata kui Tabel Nimekiri

Sorteerimine

Kuva leheküljel

Tikksaetera, 14 TPI, BIM, T-kinnitus, 2 tk, puhas lõige

02-57T550

Jigsaw blade, 15 TPI, BIM, T-handle, 2 pieces, clean cut 57T550 by GRAPHITE is a jigsaw blade with 15 TPI tooth density, made of BIM and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.27 mm and a tooth spacing of 1.7 mm. Suitable for cutting hardwood, laminate or plasterboard (<30 mm) The GRAPHITE brand blade enables clean cutting.

3,12€ 3,91€

Laost otsas. Tellides tarneaeg nädalat

Veekindel lihvpaber 230 x 280 mm, P280

02-58T218

Water sandpaper 230 x 280 mm, P280, 58T218 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.

0,236€ 0,298€

Laost otsas. Tellides tarneaeg nädalat

Takjakinnitusega lihvkettad 150 mm, P60, 5 tk, ilma aukudeta

02-58T172

Velcro sanding discs 150 mm, P60, 5 pieces, unperforated 58T172 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P60 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.

1,36€ 1,70€

Laost otsas. Tellides tarneaeg nädalat

Lihvitud kivipuur 12 × 150 mm

02-56T307

The 12 x 150 mm ground concrete drill bit 56T307 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 12 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.

1,20€ 1,50€

Laost otsas. Tellides tarneaeg nädalat

Spiraalpuidupuur 12 x 230 mm

02-54T553

The spiral wood drill, 12 x 230 mm 54T553 by GRAPHITE is a drill bit designed for working with wood and plywood, featuring a hexagonal chuck, and a spiral design. It features a diameter of 12 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.

2,41€ 3,00€

Laost otsas. Tellides tarneaeg nädalat

Bivouac table, foldable into a suitcase

03-63183

The camping table, folding into a suitcase 63-183 by NEO TOOLS is a practical travel table folded into a suitcase, made of aluminium and MDF. It is characterised by its table top dimensions of 80 x 60 cm and a height of 70 cm. When folded, it measures just 80 x 60 x 3.5 cm. Thanks to its built-in handle, it is easy to transport. Its maximum load capacity is 25 kg. Weighing just 3.4 kg, the lightweight folding camping table in a suitcase from NEO TOOLS is suitable for many home and travel situations.

24,16€ 30,19€

Laost otsas. Tellides tarneaeg nädalat

Piiksae terade komplekt, TPI 5, TPI 6, TPI 18, HCS/BIM, 10 tk

02-57T566

Sabre saw blade set, TPI 5, TPI 6, TPI 18, HCS/BIM, 10 piece set 57T566 by GRAPHITE containing 10 pieces and consisting of: 3x 57T563 - GRAPHITE HCS saw blades, 240 mm long, 19 mm wide and 1.5 mm thick, with 5 mm tooth spacing (5 TPI), designed for cutting thick wood without nails (15-190 mm), trimming green wood (diameter <190 mm) and firewood (diameter 15-190 mm); for fast and rough cutting, 4x 57T564 - GRAPHITE HCS saw blades, 152 mm long, 19 mm wide and 1.3 mm thick, with tooth pitch 4 mm (6 TPI), designed for cutting structural timber, plywood, plastics (6-100 mm), wood panels (<75 mm), chipboard and MDF (6-60 mm); for clean curved and plunge cuts, 3x 57T561 - GRAPHITE BIM saw blades, 152 mm long, 19 mm wide and 0.9 mm thick, with 1.4 mm tooth pitch (18 TPI), for thin sheet metal (1.5-4 mm), open and closed tubes and profiles with a diameter of 5-100 mm; offering flexibility and straight cutting.

19,52€ 24,40€

Laost otsas. Tellides tarneaeg nädalat

Printed T-shirt, MA SIĘ DA, size XXXL

03-81642XXXL

The T-shirt comes in a practical dark blue colour. This unique design allows you to stand out from the crowd. It also shows the personality of the wearer. The T-shirt has short sleeves and a round neckline with elasticated piping. It is made from a soft cotton knit (100% cotton) with a weight of 180 g/m2. The brand's unique in-house design, as well as the logo and name tag printed on the neck, make this the perfect t-shirt for almost any occasion - for work and for casual walking. NEO brand clothing is CE certified and recommended for fans of motoring and DIY.

9,28€ 11,59€

Laost otsas. Tellides tarneaeg nädalat

Kõvasulamhammastega saeketas 230 × 30 mm, 80 hammast

02-57T229

Saw blade, widia, 230 x 30 mm, 80 teeth 57T229 by GRAPHITE, with an external diameter of 230 mm and a mounting hole diameter of 30 mm. It has 80 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 7,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

8,64€ 10,80€

Laost otsas. Tellides tarneaeg nädalat

Tikksaetera, 12 TPI, HCS, T-kinnitus, 2 tk, kõverlõigeteks

02-57T543

Jigsaw blade, 12 TPI, HCS, T-handle, 2 pieces, curved cutting 57T543 by GRAPHITE is a jigsaw blade, with a tooth density of 12 TPI, made of HCS and with a T-handle. The set includes 2 pieces. The overall length of the blade is 76 mm, working length 50 mm, width 5.2 mm, thickness 1 mm, tooth spacing 2 mm. Suitable for cutting softwood 2-15 mm thick, chipboard, plywood and fibreboard. The GRAPHITE blade allows for curved and basic cuts.

0,880€ 1,10€

Laost otsas. Tellides tarneaeg nädalat

Kõvasulamhammastega saeketas 210 × 30 mm, 40 hammast

02-57T228

Saw blade, widia, 210 x 30 mm, 40 teeth 57T228 by GRAPHITE, with an external diameter of 210 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 2.4 mm and the tooth angle is 15°. The maximum speed is 8,000 rpm. It is characterised by a fast cutting type. The blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.

7,20€ 9,00€

Laost otsas. Tellides tarneaeg nädalat

Ketashari 150 x 32 mm, laineline messingkattega traat

02-57T406

The 150 x 32 mm wire wheel brush, twisted wire, brassed 57T406 by GRAPHITE is made of twisted brassed wire. Its maximum speed is 6000 rpm. The product complies with EN 1083-2 and includes reductions: 2 x 12.2 mm (1/2"), 2 x 15.7 mm (5/8"), 2 x 19 mm (3/4"), 2 x 22.2 mm (7/8") and 2 x 25.3 mm (1"). The mount is suitable for use with bench grinders. The GRAPHITE wire brush is a versatile product for a wide range of tasks, including aggressive cleaning and initial roughing.

7,76€ 9,70€

Laost otsas. Tellides tarneaeg nädalat

Polüstüreeni lõikur 68 mm

02-56T615

The 68mm polystyrene cutter 56T615 by GRAPHITE is a 68mm diameter cutter that has an 8mm hex shank and allows drilling to a depth of 20mm. It is designed to work in polystyrene - especially for masking areas after the installation of thermal insulation studs.

1,92€ 2,41€

Laost otsas. Tellides tarneaeg nädalat

Printed T-shirt, FEEL THE BIT, size XL

03-81641XL

Printed T-shirt, FEEL THE BIT, size XL 81-641-XL by NEO is a work t-shirt with multicoloured contrasting bit graphics and the wording FEEL THE BIT. The t-shirt is grey in colour. The large print on the front combined with the slogan is a humorous play on words, showing the distance of the wearer of this unique t-shirt. It has short sleeves and a round neckline with elasticated piping. It has been produced in a soft cotton knit (100%) with a weight of 180 g/m2. The brand's unique in-house design, as well as the logo and name tag printed on the neck, make this the perfect t-shirt for almost any occasion - for work and for casual walking. NEO brand clothing is CE certified and recommended for fans of motoring and DIY.

9,28€ 11,59€

Laost otsas. Tellides tarneaeg nädalat

S1 SR Neo Air work shoes, steel toecap, orange, size 46

03-8217246

SR Neo Air work boots, steel toecap, orange, size 46, 82-172-46 by NEO TOOLS are footwear offered with modern Neo Air technology. Equipped with a steel toecap, they are characterised by their versatility and practicality. They have a textile lining and upper woven from a single thread, which ensures a lightweight construction and an excellent shoe fit. The HI-POLY foam insole with soft zones provides adequate wearing comfort - as does the PU sole with air cushion. NEO TOOLS work boots are made in the SR category, characterised by slip resistance on glycerol-coated ceramic tile flooring. The instep provides protection against impacts with an energy equal to 200J. These are lightweight half-boots with a sporty look from NEO TOOLS and anti-static properties that will work in many professional and everyday situations.

32,88€ 41,11€

Laost otsas. Tellides tarneaeg nädalat

S1 SR Neo Air work shoes, steel toecap, reflective, size 39

03-8217139

SR Neo Air work boots, steel toecap, reflective, size 39, 82-171-39 by NEO TOOLS are footwear offered with modern Neo Air technology. Equipped with a steel toecap and reflective elements, they are characterised by their versatility and practicality. They have a textile lining and upper, where the upper is additionally supplemented with suede leather in the areas most exposed to abrasion. The HI-POLY foam insole with soft zones provides adequate wearing comfort - as does the PU sole with air cushion. NEO TOOLS work boots are made in the SR category, characterised by slip resistance on a glycerol-coated ceramic tile base. The instep provides protection against impacts with an energy equal to 200J. These are lightweight half-boots with a sporty look from NEO TOOLS and anti-static properties that will work in many professional and everyday situations.

36,64€ 45,81€

Laost otsas. Tellides tarneaeg nädalat

Work trousers DENIM, Cordura reinforcements, detachable holster pockets, navy blue, size XXL

03-813611XXL

DENIM work trousers, Cordura reinforcements, detachable holster pockets, navy blue, size XXL, 81-361-1-XXL NEO TOOLS' unique in-house brand design is made of denim fabric with a material composition of 82% cotton, 16% polyester and 2% elastane. Their grammage is 400 g/m2. In a practical navy blue colour, the trousers are reinforced with Cordura fabric. With detachable holster pockets, multifunctional pockets - additionally reinforced and equipped with zips, an elastic belt and a tool clip - this model of health and safety clothing is suitable for any situation in the working environment. The knee pad pockets and profiled knees ensure a high level of comfort. The DENIM NEO TOOLS trousers will last even longer thanks to reinforcements at the knees and the leg hem. Printed logos on the back and above the knee emphasise the brand character of the garment, and the regular cut of the trousers will work well in every season. NEO TOOLS work trousers are CE certified.

48,00€ 60,00€

Laost otsas. Tellides tarneaeg nädalat

O1 SR Neo Air work boots, blue, size 43

03-8278143

The NEO TOOLS SR Neo Air, blue, size 43, 82-781-43 work semi-boots are made with Neo Air technology, featuring a PU sole with air cushion and a HI-POLY insole with soft zones for comfort. The NEO TOOLS lightweight mid-boots without a toecap have a single-threaded textile upper and a TPU-lined toecap for increased abrasion resistance. The boots have been made to SR category, offering slip resistance on glycerol-coated ceramic tile flooring. NEO TOOLS professional half boots are characterised by anti-static properties and absorption in the heel area. This is a work shoe with a sporty look that will work well both at work and for casual wear.

31,77€ 39,70€

Laost otsas. Tellides tarneaeg nädalat

SDS Max lame meisel 25 × 18 × 400 mm

02-55T103

Vastupidav tööriist betooni ja teiste kõvade ehitusmaterjalide töötlemiseks. Meisel on varustatud SDS Max kinnitusega, mis tagab kiire paigalduse ja kindla ühenduse SDS Max süsteemiga piik- ning puurvasarates.

Meisli läbimõõt on 18 mm, kogupikkus 400 mm ning tööosa laius 25 mm. Pikem tööosa võimaldab mugavamalt töötada sügavamates või raskemini ligipääsetavates kohtades ning sobib hästi erinevateks meiseldus- ja lammutustöödeks betoonis.

Tehnilised andmed:

Kinnitus: SDS Max
Tüüp: lame meisel
Läbimõõt: 18 mm
Tööosa laius: 25 mm
Tööosa pikkus: 25 mm
Kogupikkus: 400 mm

Omadused:

Sobib tööks betoonis ja teistes kõvades ehitusmaterjalides
SDS Max kinnitus kiireks ja turvaliseks paigalduseks
Vastupidav konstruktsioon professionaalseks kasutamiseks
Ideaalne meiseldus-, lammutus- ja renoveerimistöödeks
Pikem 400 mm tööriist parema ulatuse saavutamiseks

5,77€ 7,20€

Laost otsas. Tellides tarneaeg nädalat

SDS Plus piik 14 × 250 mm

02-55T108

Kinnitus: SDS Plus
Tüüp: piikmeisel
Varre läbimõõt: 14 mm
Kogupikkus: 250 mm
Sobiv kasutusala: betooni ja müüritise lõhkumine ning meiseldamine

2,41€ 3,00€

Laost otsas. Tellides tarneaeg nädalat