UUED TOOTED

• Particularly quiet and precise run thanks to a torsion-free machine housing and a solid steel sheet substructure
• Large one-piece cast iron saw table, with a precisely ground and polished surface
• Comfortable laser device for cutting line marking
• Rapid saw blade tension via eccentric lever on the back of the machine
• Standard with two speeds
• Precise 3-roller saw band guides, standard above and below
• Fast cutting height adjustment via knob and rack with millimeter scale
• Smooth-running aluminum rip fence with eccentric quick clamping and magnifying glass
• Standard miter fence, adjustable by 60 ° on both sides
• Safety switch for automatic shutdown when the door is opened

• Heavy design with high dead weight for maximum running smoothness
• Cast iron flywheelswith rubber coating and cleaning brush
• 3 roller precision saw band guide as standard.ig above and below
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Precise cutting height adjustment via toothed rack with millimetre scale

• Heavy design with high dead weight for maximum running smoothness
• Particularly quiet and pretorsionally stiff machine housing
• Cast flywheels with rubber coating and cleaning brush
• 3-roller precision saw band guide as standard at top and bottom
• Large cast iron saw table, swivels from 0° to +15° with ground and polished surface
• Large cast-iron parallel fence with round rod guide, easilyguide, easily movable
• Saw blade tension indicator
• Precise cutting height adjustment overover toothed rack with millimetre scale
• Self-braking motor

• Version with cutting height up to 1650 mm
• Other special versions

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• Heavy version with high weight for maximum smoothness
• Precisely adjustable aluminum rip fence
• Large gray cast iron saw table, swiveling from 0° to +45° with ground and polished Surface
• Precise cutting height adjustment via rack with millimeter scale

• Heavy design with high weight for maximum smoothness
• Particularly quiet and precise running thanks to the torsion-resistant machine housing
• Precisely adjustable aluminum rip fence
• cast Flywheels with rubber coating and chip scraper brush
• Large cast iron saw table, swiveling from 0° to +45° with polished and polished surface
• Precise cutting height adjustment using a rack with a millimeter scale
• Two extraction nozzles
• Aluminum fence for cutting thin workpieces; easily repositionable by 90°
• Machine supplied without 400V plug

KGZ 3050 Vario reguleeritava kiiruse ja tõmbefunktsiooniga järkamissaag. 1600 W mootor, 305 mm saeketas, laser ja lõikevõime kuni 100 × 305 mm.

Tehnilised andmed:

• Mootori võimsus: 1,6 kW
• Toitepinge: 230 V
• Võrgusagedus: 50 Hz
• Saeketta läbimõõt: 305 mm
• Saeketta pöörlemiskiirus: 2000–4000 p/min
• Pöörlemiskiiruse reguleerimine: sujuv
• Sujuvkäivitus: jah
• Tõmbefunktsioon: jah
• Laser: jah
• Maksimaalne kallutus vasakule: 47°
• Maksimaalne kallutus paremale: 47°
• Maksimaalne eerunginurk vasakule: 50°
• Maksimaalne eerunginurk paremale: 50°
• Lõikevõime 0° kalde / 0° eerungi korral: 100 × 305 mm
• Lõikevõime –45° kalde / 0° eerungi korral: 64 × 305 mm
• Lõikevõime +45° kalde / 0° eerungi korral: 44 × 305 mm
• Lõikevõime 0° kalde / –45° eerungi korral: 100 × 215 mm
• Lõikevõime 0° kalde / +45° eerungi korral: 100 × 215 mm
• Maksimaalne pikkus: 1055 mm
• Pikkus: ca 595 mm
• Laius/sügavus: ca 800 mm
• Kõrgus: ca 710 mm
• Kaal: ca 23 kg
• Komplektis saeketas: HM 305 × 2,6 × 1,8 × 30 mm, Z60
• Komplektis: materjaliklamber, laastukott, tööriistad ja 37 mm äratõmbeadapter

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• Uniform feed rate without loss of force
• Right and left rotation
• Including stand PLUS with high-quality clamping levers and counter, individually swiveling and adjustable for horizontal and vertical use
• Eight speeds possible, speed selection via switch and change gears

• For sawing, milling, planing, thicknessing and optional long hole drilling
• Stable steel gray cast iron construction
• Format sliding table 1600 mm made of anodized aluminum for highest cutting precision
• Precise and convenient cuts even on large workpieces thanks to stable support on the 270 mm wide sliding carriage
• Robust, ribbed cast work tables
• Swiveling saw blade from 90° - 45°
• Trimming frame with telescopic aluminum crosscut fence with a flap stop for plates and large workpieces
• Planing aggregate as standard with TERSA quick change system with three planing knives
• Helical steel pick roller for constant workpiece feed during thickness planing
• Three cutting speeds, manually adjustable from 3,600 - 10,000 rpm
• Three independent industrial motors
• With lockable main switch, motor protection switch, emergency stop switch

aluminum sliding table

• Equipped with a ball contact system proven millions of times
• Permanently smooth-running
• Dust and dirt-resistant due to minimal contact point between the ball and the trapezoidal rail.
• 10-year HOLZKRAFT warranty for wear of the guideways

• TERSA quick-change system for changing planing knives in seconds
• Four-blade shaft for best planing results
• Smooth running thanks to precision unit and heavy cast iron design
• Long dressing tables for precise dressing
• Robust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flat
• Large, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°
• With auxiliary fence as standard
• Powerful 5.0 kW industrial motor
• Sturdy cast steel construction
• Equipped with fold-down planer shaft guard for user-friendly working
• Slot drilling device can be retrofitted

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply

• Stable steel gray cast iron construction
• With rigid milling spindle
• 3 spindle speeds 3500 to 10,000 min¯¹
• Milling spindle with right-left rotation
• Large dimensioned milling unit made of gray cast iron, directly attached to the table
• With extraction hood under the work table for a better suction
• Solid and precise gray cast iron table
• Fast and easy change of speed
• Powerful engine with 5.0 kW
• Standard curved cutting guard
• Quality Made in Italy

• Attached directly to the milling table
• Milling spindle mounted high up with precision ball bearing, thus the lowest possible bearing load and the highest possible service life
• 3 milling speeds from 3500 to 10000 min¯¹

• equipped with powerful three-phase motor

• The standard milling guard is equipped as standard with a height-adjustable guide rail and guard plate for maximum safety.

• Exact milling stop with a quick adjustment and a fine adjustment with scale on the stop jaw
• The integrated suction connection ensures a clear view

• A large cut-out table opening also allows the use of larger flatteners and tenoning and slotting tools above and below the table

• Supplied as standard

• Versatile integrable stop for bridging the tool gap
• enables safe work even with narrow workpieces

• Optimum protection on each router, individually adjustable to the task at hand
• Universal basic elements for holding AIGNER safety and working devices
• Quick adjustable by simultaneous clamping of all individually movable rods
• Made of high quality aluminum
• Universal application on all HOLZKRAFT table milling machines
• 500 mm: Art. No .: 5851000
• 650 mm: Art. No .: 5851650

• Change planing knives in seconds
• No more adjusting and screwing
• Self-locking
• Particularly low noise

• TERSA quick-change system for changing planing knives in seconds
• Four-blade shaft for best planing results
• Smooth running thanks to precision unit and heavy cast iron design
• Long dressing tables for precise dressing
• Robust dressing tables made of ribbed gray cast iron, milled and stress-free, making them insensitive and permanently flat
• Large, sturdy aluminum dressing fence with round rod guide (1200 x 150 mm), easily adjustable and tiltable up to 45°
• With auxiliary fence as standard
• Powerful 5.0 kW industrial motor
• Sturdy cast steel construction
• Slot drilling device can be retrofitted
• Equipped with fold-down planer shaft guard for user-friendly working

• Stable steel gray cast iron construction
• Swiveling milling spindle from 0° to -45° backwards
• 3 spindle speeds from 3500 - 10000 min¯¹
• Standard with right-left rotation of the milling spindle
• Large dimensioned milling unit made of gray cast iron, directly attached to the table
• Solid and precise gray cast iron table
• Fast and easy change of speed
• Powerful 5.0 kW industrial engine
• Standard curved cutting guard

Made in Italy

Aluminum sliding carriage

• Equipped with a million times proven ball contact system
• Permanently smooth-running
• Dust- and dirt-resistant due to minimal contact point between ball and trapezoidal rail
• 10-year HOLZKRAFT warranty on guideway wear

Cast iron milling unit

• Attached directly to the milling table
• Milling spindle mounted high up with precision ball bearing, thus the lowest possible bearing load and the highest possible service life
• 3 milling speeds from 3500 to 10000 min¯¹

Powerful motors

• equipped with powerful three-phase motor

Milling protection

• The milling protection is equipped as standard with a height-adjustable guide rail and mudguard for maximum safety.

• Exact milling stop with a quick adjustment and a fine adjustment with scale on the stop jaw
• The integrated suction connection ensures a clear view

Table opening

• A large cut-out table opening also allows the use of larger flatteners and tenoning and slotting tools above and below the table

• Supplied as standard

• Versatile integrable stop for bridging the tool gap
• Allows safe working even with narrow workpieces

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply
• Made in Italy

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply
• Made in Italy

• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Powerful 5.0 kW industrial engine

• Stable steel gray cast iron construction
• Anodized aluminum sliding carriage
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Four cutting speeds from 3500 to 10000 min¯¹
• Right-left rotation as standard
• Display height and inclination 1/10 mm exactly
• Quick and easy change of speed via eccentric tension
• Solid and precise gray cast iron table, stress-free and post-annealed for lasting precision
• Powerful 5.0 kW industrial engine
• Curved cutting guard in scope of supply
• Made in Italy

• With table extension left and right

• Stable steel gray cast iron construction
• Large dimensioning milling unit made of cast iron, swiveling to -45 ° to the rear
• Display of milling speeds by LEDs
• Fast, trouble-free speed change via eccentric tension
• Forward and reverse running
• Display height and inclination 1/10 mm exactly
• Heavy-duty milling stop: with fine adjustment via toothed rack, with numeric display, aluminum stop jaws, 3-positionable for quick repetition of adjustment

• Simple and precise adjustment of the chip removal during dimensionally accurate thickness planing
• Jointing and thicknessing table made of cast iron with polished surface
• Strip planer knife shaft with three HSS knives
• Aluminum planing stop can be inclined 45°

• For angle joints (90°) and precise surface planing of solid wood boards, planks and slats
• Easy and precise adjustment of chip removal in precision thicknessing
• Jointing and thicknessing table made of cast iron with polished surface
• Strip planer knife shaft with three HSS knives
• Aluminum planing stop can be inclined 45°
• Integrated, folding swarf extraction hood