Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
The crevice nozzle (for 59G613, 59G614) 59G613-149A by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32 mm. Designed to remove debris from hard to reach areas.
Screwdriver bits PH2 x 25 mm, 100 pcs. 56H626 by GRAPHITE are characterised by the PH2 type and a total length of 25 mm. They have a ¼" hexagonal profile. The bits are made from high grade S2 steel. They are compatible with both mains and battery powered tools. The set consists of 100 individual pieces. The GRAPHITE brand is recommended for professionals and DIY enthusiasts.
The 58GE106, 58GE106-24 Sprayer Nozzle Kit by GRAPHITE is a set of three components - a single round nozzle, a double round nozzle and a fan (flat jet) nozzle. It is dedicated to the 58GE106 sprayer by GRAPHITE. It offers a flow rate from 0.8 l/min (when using the single nozzle) to 1.3 l/min (when using the double nozzle). The nozzle opening is 1.6mm. This GRAPHITE-branded kit with nozzles of varying spray patterns is recommended for spraying protective substances and fertilisers in the garden or allotment, for example.
Screwdriver bit PH1 x 6.35 x 300 mm, 1/4" 56H576 by GRAPHITE is a PH1 type bit with size 6.35 and length 300 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.
Screwdriver bit PZ1 x 6.35 x 150 mm, 1/4" 56H570 by GRAPHITE is a PZ1 (2-3 mm) screwdriver bit of 6.35 size and 150 mm length. Mounted on ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for POZDIRIV screws and will prove useful in every professional and DIY workshop.
The robust and durable GRAPHITE three-tine blade (255 mm x 1.4 mm x 25.4 mm x 3T) is a professional accessory for the GRAPHITE 58G035 cordless scythe in the Energy+ series. With its three tines, the blade can perfectly handle dense grass, weeds and even overgrowth - where a line is no longer sufficient. Developed for demanding users, the blade provides a cutting diameter of 255 mm and maximum efficiency in the field. It works perfectly with the brushless cutter powered by two 18V batteries, ensuring reliability and power where you need it most.
Agitator working part with a diameter of 120 mm dedicated to stem ref 56H700. Injection mixer designed for dense solutions, e.g. mortars, concretes, adhesives, which have sand, gravel or expanded clay as filling.
Mixer working part with a diameter of 140 mm for mandrel ref. 56H700.Feeder agitator for thick solutions, e.g. mortar, concrete, adhesives, which have sand, gravel or expanded clay as the filling. Steel, galvanised
Impact bits TX15 x 25 mm, 20 pieces 56H544 by GRAPHITE type TORX 15 with an overall length of 25 mm. They are recommended for ¼" drive and heavy-duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.
Screwdriver bit PH2 x 6.35 x 150 mm, 1/4" 56H577 by GRAPHITE is a screwdriver bit type PH2 with size 6.35 and length 150 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.
Impact bits TX30 x 25 mm, 20 pieces 56H547 by GRAPHITE type TORX 30 with an overall length of 25 mm. They are recommended for ¼" drive and heavy-duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.
Screwdriver bit PH2 x 6.35 x 300 mm, 1/4" 56H578 by GRAPHITE is a screwdriver bit type PH2 with size 6.35 and length 300 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.
The connection hose for 59G614, 59G614-147 by GRAPHITE is a hose dedicated to the industrial hoover number 59G614, characterised by a length of 150 cm and a diameter of 32 mm. A high quality accessory from the GRAPHITE brand.
Impact bit extension 150mm 56H558 by GRAPHITE with an overall length of 150mm. It has been manufactured from durable CrV steel. It features a ¼" drive and has a practical magnetic tip for easy installation of bits. The bit is compatible with impact tools. GRAPHITE brand item recommended for professionals and DIY enthusiasts.
Quick release nut for M14 angle grinder, 56H421 by GRAPHITE with a height of 13 and width of 46 mm. Adaptable for M14 threads. Allows quick mounting and removal of the disc without the use of a spanner. Can be used on all angle grinders with a suitable spindle. The nut has built-in holes for a standard grinder key in case it gets jammed. The chuck holds the disc very well and the diameter range for the disc is 115 - 230 mm. The GRAPHITE brand component is characterised by its knurled sides. It is recommended for professionals and DIY enthusiasts.
Impact bits TX25 x 25 mm, 20 pieces 56H546 by GRAPHITE type TORX 25 with an overall length of 25 mm. They are recommended for ¼" drive and heavy duty high torque work using screwdrivers or impact drivers. The impact bits are made from durable S2 steel. The set offers 20 pieces for professionals and DIY enthusiasts.
Screwdriver bit PH1 x 6.35 x 150 mm, 1/4" 56H575 by GRAPHITE is a PH1 type bit with size 6.35 and length 150 mm. Mounted on a ¼" thread. It features high resistance to deformation and is recommended for high frequency work. The element is made of S2 steel. The tip is recommended for Phillips screws, it will prove useful in every professional and DIY workshop.
GRAPHITE's 58GE135, 58GE135-30 knife set, 82mm in length, is dedicated to GRAPHITE's Energy+ 18V 58GE135 cordless planer. The parts are made from high quality HSS steel. They are characterised by their high quality and enable efficient replacement. GRAPHITE brand is recommended for professionals and DIY enthusiasts.
