Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Mixer working part with a diameter of 120 mm dedicated to stem ref 56H700. A pull-up mixer designed for thin solutions, e.g. paints, gypsum plaster, structural paints. The solution is forced downwards so that it does not spill or dirty the surroundings.
Floor nozzle (for 59G613, 59G614) 59G613-149C by GRAPHITE is a nozzle designed for industrial hoovers with part numbers 59G613 and 59G614. It is characterised by a diameter of 32mm. Designed to remove debris from large areas and various types of flooring.
Impact bits TX40 x 25 mm, 20 pieces 56H548 by GRAPHITE is a set of 20 pieces of heavy duty TX40 type impact bits with an overall length of 25 mm. The accessories are made from robust S2 steel, with a ¼" drive square size. Essential for every professional and DIY workshop.
The reduction tip (for 59G613, 59G614), 59G613-150 by GRAPHITE is an accessory with diameters: 26, 32, 35 and 40 mm, designed for industrial hoovers with part numbers 59G613 and 59G614. The GRAPHITE brand reduction tip expands the usability of the above hoovers.
Screwdriver bits PZ2 x 25 mm, 100 pcs. 56H624 by GRAPHITE are characterised by the PZ2 type and an overall length of 25 mm. They have a ¼" hexagonal profile. The bits are made from high grade S2 steel. They are compatible with both mains and battery powered tools. The set consists of 100 individual pieces. The GRAPHITE brand is recommended for professionals and DIY enthusiasts.
Torx bits T30 x 25 mm, 3 pieces 56T519 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T20 x 25 mm, 3 pieces 56T522 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
Bits PH1 x 50 mm, 3 pieces 56T540 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
The PZ1 x 25 mm bits, 3 pieces 56T537 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Magnetic chuck 60 mm, 1/4" Hex 56T510 by GRAPHITE is designed for use with screwdrivers and drill drivers. The magnet holding the bit in the socket makes work more convenient and efficient. The bit size is 1/4" (hexagon). The GRAPHITE brand chuck is made from tool steel. The magnet also makes it possible to attach the blades quickly and prevents them from falling out. The length of 60 mm, on the other hand, makes the handle handy and suitable for working in hard-to-reach places. The product is compatible with most screwdrivers and drills. The GRAPHITE magnetic chuck is ideal for assembly work, carpentry, renovation and anywhere else where a quick change of tool bits is required.
Bits PH3 x 50 mm, 3 pieces 56T538 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T15 x 25 mm, 3 pieces 56T523 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
PZ2 x 50 mm bits, 3 pieces 56T533 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Hex bits H5 x 25 mm, 3 pieces 56T530 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Bits PH2 x 50 mm, 3 pieces 56T539 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
Torx bits T25 x 25 mm, 3 pieces 56T521 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The bits from the GRAPHITE brand are suitable for many tasks.
PZ3 x 50 mm, 3 pieces 56T532 by GRAPHITE is a useful set of 3 pieces of bits. The accessories are made from CrV steel and the chuck size is ¼". Designed for drills and drill drivers, they are used for tightening and loosening screws and bolts. The GRAPHITE bits will prove their worth in many tasks.
PH2 x 25mm stop bits, 2 pieces 56T551 by GRAPHITE is a 25mm long PH2 stop bit set containing 2 pieces made from durable CrV steel. The bits are fitted with a ¼" chuck, making them compatible with most drills and drill drivers. The bits with depth stop enable precise and safe screwdriving, especially when installing plasterboard or panels. Suitable for effectively tightening and loosening screws, the GRAPHITE stop bits will prove useful for many tasks.
The PZ1 x 25mm stop bits, 2 pieces 56T550 by GRAPHITE is a set of 25mm long PZ1 stop bits, containing 2 pieces made from durable CrV steel. The bits are fitted with a ¼" chuck, making them compatible with most drills and drill drivers. The bits with depth stop enable precise and safe screwdriving, especially when installing plasterboard or panels. Suitable for effectively tightening and loosening screws, the GRAPHITE stop bits will prove useful for many tasks.
PH1 x 25mm stop bits, 2 pieces 56T552 by GRAPHITE is a 25mm long PH1 stop bit set containing 2 pieces made from durable CrV steel. The bits are fitted with a ¼" chuck, making them compatible with most drills and drill drivers. The bits with depth stop enable precise and safe screwdriving, especially when installing plasterboard or panels. Suitable for effectively tightening and loosening screws, the GRAPHITE stop bits will prove useful for many tasks.
