Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Saw blade, widia, 185 x 30 mm, 60 teeth 57T221 by GRAPHITE, with an external diameter of 185 mm and a mounting hole diameter of 30 mm. It has 60 teeth, the cut width is 2 mm and the tooth angle is 15°. The maximum speed is 9,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
The HSS metal drill bit, DIN 338, 8.5 mm 54T914 by GRAPHITE is an accessory for metal, characterised by a diameter of 8.5 mm, an overall length of 117 mm and a working part length of 75 mm. The drill bit is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It is DIN 338 compliant and will be suitable for every DIY enthusiast.
The GRAPHITE 57T302 solid diamond cutting wheel, 180 x 22.2 mm, wet 57T302 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.4 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Wood drill bit set: 4, 5, 6, 8, 10 mm, 5 pieces 54T574 by GRAPHITE is a set of 5 drill bits with diameters from 4 to 10 mm with a practical cylindrical handle. They allow drilling to various depths in wood and plywood. They are characterised by an overall length from 75 to 120 mm and a maximum speed for each diameter: 4 mm - 1800 rpm, 5 mm - 1700 rpm, 6 mm - 1400 rpm, 8 mm - 900 rpm, 10 mm - 700 rpm. They will work well for many DIY projects.
Water sandpaper 230 x 280 mm, P2200, 58T230 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
The Hex 10.0 mm wood drill bit 54T582 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX shank. It is characterised by a diameter of 10 mm and a length of 120 mm. It is suited to tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
Sanding sponge 70 x 25 x 100 mm, P180, 58T165 by GRAPHITE is a sponge designed for hand sanding and finishing. Used for smoothing putty, drywall, plaster, paint, plastics, wood, metal and varnish coatings. The abrasive grain made of electro-corundum is located on four sides of the sponge. The soft structure allows it to conform to the shape of the surface to be sanded, and for hard-to-reach areas, the sponge can be easily cut into smaller pieces. Thanks to its thickness and flexibility, the GRAPHITE sanding sponge distributes the pressure of the hand evenly, avoiding localised depressions and scratches.
The SDS Plus Concrete Drill with Double Spiral 8 x 400 mm 56T113 by GRAPHITE is a concrete, brick and stone drill bit with double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 400 mm and a working length of 300 mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's 6 x 100 mm 56T203 concrete drill bit with cylindrical shank, has a diameter of 6 mm, an overall length of 100 mm and a working length of 60 mm. Recommended for concrete, brick and stone applications.
The TiN, 14 mm 54T410 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 14 mm and an overall length of 88 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
Sanding grid white 115 x 280 mm, P120 58T143 by GRAPHITE recommended for handheld applications with wood, metal, plastic, glass and plasterboard. It is characterised by a double-sided grit and a white grain of fine electro-corundum. It is a waterproof, easy-to-clean GRAPHITE mesh that flexibly adapts to the surface. Thanks to its double-sided grit, it is economical and efficient to work with. It will prove its worth in many tasks.
The sabre saw blade, HM 455 x 50 x 1.5 mm, 2 TPI, 57T565 is a tool with an overall length of 455 mm, a width of 50 mm and a thickness of 1.5 mm, fitted with carbide-tipped teeth (TCT). It has been designed for cutting construction materials. With a tooth spacing of 12.7 mm (2 TPI), it can effectively work with hollow bricks (up to 405 mm), porous concrete, red and lightweight bricks, and fibre cement.
GRAPHITE's 100 mm diameter wire butt brush, twisted steel wire, M14, 57T412 is made from twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 8500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Wood hole saws with adapter 19 - 64 mm, set of 12 pcs. 56T748 by GRAPHTE is a set of wood hole saws with adapter, which includes eight pieces with diameters from 19 to 64 mm, allowing holes up to 25 mm deep. The set also includes an Allen spanner, adapters with a 7.8 and 9.5 mm shank and a 6 mm diameter centre drill bit. GRAPHITE holesaws are suitable for working in wood, plasterboard and plastic, with a maximum speed of 2,000 rpm.
Velcro sanding discs 125 mm, P120, 5 pieces, with 8 holes 58T292 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
Water sandpaper 230 x 280 mm, P400, 58T221 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Water sandpaper 230 x 280 mm, P150, 58T214 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Segmented diamond cutting wheel, 230 x 22.2 mm, dry and wet 57T314 by GRAPHITE is a segmented dry and wet cutting wheel with a diameter of 230 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.4 mm wide. The maximum speed of the disc is 6 600 rpm, corresponding to 80 m/s. The GRAPHITE disc meets the requirements of EN 13236 and is designed for cutting granite, concrete, brick, stone and marble.
The GRAPHITE 57T301 solid diamond cutting wheel, 125 x 22.2 mm, wet 57T301 is a solid diamond cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
Straight wood router bit with bearing, widia, 8 x 19 mm, shank 8 mm 56T608 by GRAPHITE is a router bit with unscrewable bearing, with a blade diameter of 8 mm and a height of 19 mm and an overall length of 65 mm. It is fitted with an 8 mm shank. The cutter is made of tungsten carbide (TCT), ensuring durability and precision. With two cutting edges, it is ideal for making straight grooves, grooves and slots. The straight profile allows for smooth edge machining. It is designed for woodworking and is therefore suitable for carpentry and furniture work.
