Hammerjack on GRAPHITE-tuotteiden virallinen maahantuoja. GRAPHITE on eurooppalainen työkalubrändi, joka tarjoaa laadukkaita sähkötyökaluja, akkutyökaluja ja käsityökaluja rakentamiseen, remontointiin ja asennustöihin. Tuotteissa yhdistyvät kestävyys, käyttömukavuus ja erinomainen hinta-laatusuhde.
Valikoimaan kuuluvat akkuporakoneet, iskuporakoneet, kulmahiomakoneet, pistosahat, pyörösahat, hiomakoneet, monitoimityökalut, käsityökalut ja tarvikkeet.
Työkaluja vaativille käyttäjille
GRAPHITE-työkalut tarjoavat luotettavaa suorituskykyä ja pitkän käyttöiän erilaisiin rakennus- ja asennustöihin.
Miksi valita GRAPHITE?
GRAPHITE-tuotteiden virallinen maahantuoja.
Laadukkaat sähkö- ja akkutyökalut.
Laaja käsityökalujen valikoima.
Kestävä ja ergonominen rakenne.
Erinomainen hinta-laatusuhde.
Luotettavat työkalut kaikkiin projekteihin
GRAPHITE tarjoaa luotettavia ratkaisuja rakentajille, asentajille ja vaativille harrastajille.
Sanding cloth 230 x 280 mm, P60, 58T344 by GRAPHITE is an accessory with full grain electro-corundum and flexible JF backing. It has 100% coverage and contains a synthetic resin bond. It will work well with plasterboard, wood, metal and plastics. GRAPHITE brand abrasive canvas is recommended for coarse coating removal.
GRAPHITE's 57T327 diamond grinding wheel, turbo, 125 x 22.2 mm, dry 57T327 is designed for dry use. Reduction rings are included. The disc has a diameter of 125 mm and a mounting hole of 22.2 mm. The segment height is 4.5 mm, while its width is 20 mm. The maximum speed should not exceed 12,200 rpm - corresponding to a speed of 80 m/s. The tool is designed for grinding concrete, cellular concrete, brick and stone.The holes in the disc improve cooling during operation and facilitate the removal of dust and abrasive material. They effectively improve debris removal, which speeds up the grinding process. The diamond-coated segments ensure efficient and durable grinding, and their even wear ensures consistent performance over the entire service life. The segmented design promotes better heat dissipation, preventing the tool from overheating. The GRAPHITE-branded disc features a multi-segment arrangement with curved grooves that effectively guide the excavated material away from the work zone, increasing the speed and comfort of the work. The product complies with the EN 13236 standard.
Saw blade, widia, 400 x 30 mm, 40 teeth 57T235 by GRAPHITE, with an outer diameter of 400 mm and a mounting hole diameter of 30 mm. It has 40 teeth, the cut width is 3.4 mm and the tooth angle is 15°. The maximum speed is 4,500 rpm. It is characterised by a fast cutting type. The saw blade complies with EN 847-1 and includes 30/25.4 mm, 30/20 mm and 30/16 mm reduction rings. The GRAPHITE brand saw blade is designed for cutting wood and wood-based materials such as plywood, chipboard and MDF. The reduction rings included in the package allow the blade to be used with most saw models.
HSS metal drills, DIN 338, 4.2 mm, 2 pieces 54T942 by GRAPHITE is a set of 2 metal drills, characterised by a diameter of 4.2 mm, an overall length of 75 mm and a working part length of 43 mm. The drills are made of HSS high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and will be suitable for every DIY enthusiast.
GRAPHITE's 54T429 double sided screw extractors for broken bolts or damaged sockets, set of 4 pieces 54T429 is a set of screw extractors designed for broken bolts or damaged sockets. They feature a HEX handle and are designed for screws from M5 to M14. They have a length of 50mm. GRAPHITE unscrews are made from S2 steel. They will work well for removing screws with machined sockets such as Phillips, flat, Torx, Allen and many others. Suitable for DIY enthusiasts.
The Hex 3.0 mm wood drill 54T577 by GRAPHITE is a drill bit designed for working with wood and plywood and features a HEX shank. It is characterised by a diameter of 3 mm and a length of 80 mm. It is adapted for tasks with a maximum speed of 2800 rpm. It will work well for many DIY tasks.
HSS-G metal drill bits, 2 - 8 mm, set of 13 pieces, 54T940 by GRAPHITE are metal drill bits characterised by diameters 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm. They are made of HSS-G high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Iron sanding papers, Velcro 98 x 140 mm, P150, 5 pieces, with 5 holes 58T320 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
Jigsaw blade set, 6 TPI, 10 TPI, HCS, T-handle, 5 pieces 57T551 by GRAPHITE is a set consisting of jigsaw blades with HCS and T-handle, in two types: jigsaw blades 57T548 by GRAPHITE (2 pieces), with toothing density 6 TPI, total length 100 mm, working length: 74 mm, width: 8 mm, thickness: 1.5 mm and tooth spacing: 4 mm. This blade is characterised by its use for softwood, chipboard, plywood, fibreboard (10-45 mm). And also the jigsaw blades 57T549 (3 pieces), with a tooth density of 10 TPI, total length: 100 mm, working length: 74 mm, width: 8 mm, thickness: 1.5 mm and tooth spacing: 2.5 mm. Applications for this model are: softwood, chipboard, carpenter's plywood, fibreboard (3-30 mm), plastic/epoxy (diameter <30 mm). Both GRAPHIE saw blades ensure a clean cut.
GRAPHITE's 20mm 56T601 widia cutter is designed for drilling holes in wood, furniture boards and plastics. The carbide-tipped (TCT) blades provide durability and a precise finish. The design of the tool allows for flat-bottomed holes and the self-centring tip allows for accurate positioning in the material. The GRAPHITE cutter has central and external cutting blades, an overall length of 85mm and a cylindrical shank.
The SDS Plus Double Spiral Concrete Drill 22 x 1000 mm 56T160 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 22 mm and an overall length of 1000 mm and a working length of 800 mm. It will prove useful for many tasks around the home and in the workshop.
The SDS Plus Concrete Drill with Double Spiral 8 x 160 mm 56T109 by GRAPHITE is a concrete, brick and stone drill bit with a double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 160 mm and a working length of 90 mm. It will prove useful for many tasks around the home and in the workshop.
The SDS Plus double helix 14 x 1000 mm 56T139 concrete drill bit by GRAPHITE is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 1000 mm and a working length of 800 mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's SDS Plus concrete drill bit with double helix 20 x 260 mm 56T151 is a concrete, brick and stone drill bit with double helix and SDS Plus chuck. It features a diameter of 20mm and an overall length of 260mm and a working length of 182mm. It will prove useful for many tasks around the home and in the workshop.
GRAPHITE's Wood Drill, Extended 4 x 400 mm 54T555 is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It is characterised by a diameter of 4 mm and a length of 400 mm. Suitable for tasks with a maximum speed of 2800 rpm. It will work well for many DIY tasks.
The SDS Plus Concrete Drill with Double Spiral 8 x 310 mm 56T112 by GRAPHITE is a concrete, brick and stone drill bit with double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 310 mm and a working length of 230 mm. It will prove useful for many tasks around the home and in the workshop.
SDS Plus concrete drill bit with double helix 14 x 450 mm 56T137 by GRAPHITE is a concrete, brick and stone drill bit with double helix and SDS Plus chuck. It features a diameter of 14 mm and an overall length of 450 mm and a working length of 340 mm. It will prove useful for many tasks around the home and in the workshop.
Sanding paper yellow 230 x 280 mm, P120, 58T204 by GRAPHITE is a product designed for sanding surfaces such as wood and plasterboard. Made on a D-paper base, it is characterised by high durability and resistance to tearing. Thanks to its open-cut coating, in which the surface is covered with 100% electro-corundum abrasive grain, GRAPHITE paper offers greater resistance to sanding dust clogging. It can be used for both hand and machine sanding - including with orbital sanders and plaster sanding trowels.
Water sandpaper 230 x 280 mm, P2000, 58T229 by GRAPHITE is a water-based hand sanding paper. It has a full grain of electro-corundum, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
SDS Plus double helix concrete drill bit set 5 x 6 x 110 mm, 6 x 8 x 10 x 160 mm, set of 5 56T169 by GRAPHITE are concrete, brick and stone drill bits with double helix and SDS Plus chuck. They feature diameters of 5, 6 mm (at 110 mm length) and 6, 8, 10 (at 160 mm length). They will prove useful for many tasks around the home and in the workshop.
