Korjaamovarusteet ja autotarvikkeet

• Cylinders and cylinder heads with long ribs for optimum heat dissipation;
• carefully balanced crankshaft made of cast iron for better concentricity
• Stainless steel valves with high air flow
• Pulley designed as a fan
• Optimized airflow, high fan performance
• Highly efficient air filter with labyrinth intake channel for noise reduction

• Maximum, robust equipment and best quality at a reasonable price
• Fully automatic on-off operation
• With all safety devices
• Fully wired

Quality electric motor

• Quality electric motor with high torque is equipped with a motor protection switch
• Start-up capacitor and start-up relief valve ensure easy start-up
• As standard with phase inverter for easy manual reversal of the direction of rotation

Compressed air compression via high-performance aggregate HOS

• The start-up relief valve ensures a light and pressure-free start
• High-performance unit made of gray cast iron and the low speed guarantee particularly quiet, low-vibration operation and a long service life
• This ensures an even longer life due to even less wear
• High-quality compressor with optimum lubrication for a long service life and high reliability
• Equipped with high quality suction filter
• The aftercooler with large cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, which protects the compressed air tools
• In addition with intercooler to the aftercooler
• Corrosion-free valve plates for improved heat dissipation and longevity of the compressor
• The large fan wheel and a cooling air baffle on the cylinder ensure optimum cooling of the compressor
• A sturdy belt guard made of metal ensures optimum protection of the components and high user safety
• Compressed air supply into the boiler via flexible armored hose line with heat protection prevents vibration fracture

High quality drive belt

• Powerful and economical drive
• The toothed drive belt facilitates start-up, improves smoothness and power transmission and reduces the Power consumption up to 30%
• Stable belt guard made of metal

Operation at the maintenance block

• Equipped with a high-quality CONDOR pressure switch MDR 5 with robust push button function for fully automatic on-off operation
• Filter pressure regulator for stepless adjustment of the working pressure, with simultaneous dirt, oil and condensation separation
• Two large pressure gauges indicate the tank and working pressure
• Air extraction at the maintenance block via a comfort safety quick coupling
• Only fixed screw connections at the maintenance block, no hose connections

Two compressed air supply points

• A compressed air extraction point for filtered compressed air
• A compressed air extraction point via direct outlet on the boiler with ball valve

Comfort safety clutch - the advantages.

• Comfort safety couplings from AIRCRAFT are the first manufacturer to be used as standard
• Two separate locking systems for maximum work safety
• Dangerous flogging of the hose is prevented

Comfortable and safe to transport and set up

• Ergonomically extended handle for easy transport in a nearly upright position - stress on the back by lifting is avoided
• Puncture-proof PU foam wheels and stable steering gear with parking brake enable easy transport
• The parking brake prevents rotation and rolling of the wheels and ensures an optimal level of the compressor
• With practical second transport handle on the boiler, with which the carrying of the compressor is facilitated

High-quality boiler with durable rust protection

• AIRCRAFT is the first manufacturer to equip the compressors of the AIRPROFI series as standard with internally and externally hot-dip galvanized boilers
• The AIRPROFI series boilers therefore come with a 15-year rust-proof warranty.

• The two-stage compression 2-cylinder high-performance unit achieves a very low rotational speed, resulting in a particularly quiet and low-vibration run
• This ensures a longer life due to less wear
• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins and intercooler to the aftercooler ensure a low container inlet temperature and thus less moisture in the compressed air
• High quality electric motor with high torque
• Electric motor equipped with motor protection switch
• With high-quality CONDOR pressure switch
• Equipped with a pressure gauge for tank pressure and a ball valve on the compressed air tank
• Compressed air tank equipped with safety valve, container pressure gauge and condensate drain tap
• Ten-year rust-through warranty on powder-coated compressed air tank
• With all safety devices
• Fully wired
• Stable belt guard made of metal
• Including swinging elements
• Connection to grid by qualified electrician

• For fully automatic removal of condensate or other non-aggressive fluids from the compressed air system
• A capacitive sensor detects the level of the condensate. This is very accurate and requires no mechanical floats and contacts.
• For installation as external arresters on reciprocating or screw compressors, aftercoolers, cyclone separators, compressed air boilers, compressed air dryers and compressed air filters
• Equipped as standard with a factory alarm, LED indicator, test button and integrated sieve
• On request also version with service network for setting the diagnostic parameters and an alarm output available

• The condensate is collected in the collection reservoir.
• If the level is high enough, the condensate is discharged from the system without loss of air
• Liquid level is detected by a precise capacitive liquid level sensor
• The special self-cleaning, direct-acting valve ensures reliable operation

• Integrated sieve (easy access / cleaning)
• Compact design
• Patented valve technology - direct acting, self-cleaning valve
• Optimized for easy service (maintenance kit)
• Horizontal or vertical installation possible
• Robust PA housing
• Including 2 meters connection cable with Schuko plug

• Compressed air filters are used for highly efficient removal of solid particles, water, oil, aerosols, hydrocarbons, odors and vapors from compressed air systems.
• To achieve the required quality of compressed air, filters that gradually remove all types of solid and liquid contaminants from the compressed air must be installed in the compressed air line
• Your advantages through better quality compressed air:
• Safe filtration of both liquids such as water and aerosols as well as particles, dust and gases
• Better working and production conditions
• Optimum protection of connected tools and machines
• Improved product quality through reduction of rejects
• Protection of the compressed air system against contamination
• Increase of productivity by reduction of instant maintenance

• for separating solid contaminants up to 0.01μm
• Residual oil aerosol content up to 0.01 mg / m³ at 20 ° C and 1 bar
• Operating temperature 1.5 to 65 ° C
• absolute compressed air quality according to ISO 8573-1
• for safe separation of condensate and particles
• complete with filter element and float valve

• Suitable for compressed air with full free passage
• Temperature resistant from -20 ° C to + 180 ° C

• Easy and simple installation
• Installation times can be reduced by up to 40%
• Suitable for copper and plastic pipes
• Ideal for tight installation conditions a flexible pipe system
• disassembly possible without damaging the pipe connector
• multiple loosening and plugging possible
• secure and tight connection without constant inspection

• For continuous air demand and discontinuation operation
• Electronic control for reliability and efficiency
• Optimized oil separation system
• Integrated design of the compressor unit
• Lightweight, compact and quiet

• Just as mobile and compact as piston compressors, but with the great advantage of being able to generate compressed air continuously without any cooling pauses
• Can also be used in intermittent operation due to oil temperature control

Electronic temperature control for optimum oil temperature

• Optimum oil viscosity due to constant temperature, therefore also suitable for intermittent operation with frequent load changes
• Temperature control of the oil prevents condensation and minimizes wear
• Better energy efficiency compared to a piston compressor with the same delivery capacity
• Additional oil heat exchanger for cooling

K-Tronic electronic control system for reliability and efficiency

• Adjustment of the cut-in and cut-out pressure
• Direction of rotation control
• Monitoring and control of the oil temperature
• Maintenance interval display

Optimized oil separation system

• Effective oil pre-separation by gravity, as the oil sump is located at the lowest point
• Oil separator cartridge and oil filter cartridge easily accessible for maintenance

Integrated design of the compressor unit

• Convenience and high operational reliability thanks to integration and short connections of all key components on the compressor unit
• Maintenance-free direct drive
• Freewheel valve for load-free operation after reaching the set pressure

Lightweight, compact and quiet

• Can be used in mobile applications or where space is limited
• Highly efficient and low-noise fan
• Smooth-running compressor with low noise level

Area of application

• Small space requirement, ideal e.g. for car washes, biogas or fire extinguishing systems, small workshops and mobile use
• Also ideal as an auxiliary compressor to supplement existing systems, e.g. to cover compressed air base loads and peaks

• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Maximum mechanical efficiency
• No transfer elements
• Highly efficient cooling air fan
• Lamella valves for optimum cost-effectiveness
• Front and additional cooling for maximum durability
• Anti-corrosive surface treatment

• Large fan wheel and a cooling air baffle on the cylinder for optimum cooling of the compressor
• Aftercooler with cooling fins for low vessel inlet temperature and less moisture in the compressed air
• Sturdy metal belt guard
• "Made in Germany": vessel pressure gauge; filter pressure regulator with pressure gauge for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Including high-quality composite safety coupling and high-quality CONDOR pressure switch

• Two-cylinder high-performance units made of gray cast iron for a long service life.
• Large fan wheel and a cooling air baffle on the cylinder for optimal cooling of the compressor
• Quality electric motor with high starting torque
• Electric motor equipped with motor protection switch
• Aftercooler with cooling fins ensures a low tank inlet temperature and thus less moisture in the compressed air
• Sturdy metal belt guard
• Start-up capacitor and start-up relief valve ensure easy start-up on 230 volt models
• Container pressure gauge "Made in Germany
• Filter pressure regulator with pressure gauge "Made in Germany" for regulated compressed air cleaned of condensate, dirt and oil
• Ten-year warranty against rust-through on powder-coated compressed air reservoir
• Includes high quality composite safety coupling and high quality CONDOR pressure switch
• Large ergonomic handle
• Stable steering chassis with parking brake in combination with large, puncture-proof PU wheels
• Made in Europe

• Screw compressor with ribbed belt drive
• Start-stop operation via pressure switch, thereby saving energy compared to idling control
• Minimal and easy maintenance
• Ready for connection with all fittings
• Fifteen-year rust-through warranty on inside and outside hot-dip galvanized compressed air tank
• Easily transportable and deployable thanks to the safety pallet.
• KK version as standard with automatic steam trap for the reliable and economical discharge of the condensate without unnecessary loss of compressed air
• K and KK version with refrigeration dryer as standard with pressure dew point at 3 °C, ambient temperature 25 °C

• Enabling the second compressed air vessel doubles the pressure vessel volume, thus creating a greater compressed air reserve. Helps to cover short-term peaks in compressed air requirements
• For, e.g., chisel, hammer or sandblasting work, the second vessel can be isolated from the compressed air supply. This halves the vessel volume helping to build up the pressure more quickly.

• Maintenance-free direct drive
• Low space requirements and energy costs
• Low noise level
• Generously dimensioned cooler
• Easy installation and accessibility of all maintenance positions

Coaxial screw-type compressor with maintenance-free drive and maximum energy efficiency in all pressure ranges. Low compressor speeds and low load on the bearings of the patented direct drive ensure a very long service life.

• Prevents motor overload, reduces wear and makes for a longer service life
• Monitoring of operating hours, temperature and motor overload
• Phase sequence relays control the direction of rotation of the motor, thereby avoiding possible damage during commissioning or after relocation

• Low-noise centrifugal fan guarantees optimal operating temperatures even under unfavourable conditions
• Thermostatically and electronically controlled fan and generously sized heat exchanger result in a longer service life and less fluctuation in oil temperature

• Low noise, suitable for deployment in any work environment
• Small footprint facilitates transport and deployment
• Service-friendly thanks to optimum accessibility and easy removal and installation of all components that require maintenance
• All air and oil lines are made of heat-resistant rubber
• Equipped with a star delta circuitry as factory standard
• Ready to connect with all fittings and safety equipment

• More reliable compressed air system without costly downtimes and production delays while simultaneously ensuring product quality
• Fully integrated into the housing
• Ready for use without installation overhead
• Equipped with control panel and time-controlled condensate drain

• Boiler batteries for up to 400 liters of additional air supply
• Available as 2-pack and 4-pack batteries
• All tank batteries also available in 13 bar version with 75 l tanks
• By connecting additional compressed air tanks, the tank volume is increased, whereby a higher air supply can be built up.
• Increased air demand can be covered at short notice
• If required, individual compressed air tanks can be disconnected from the compressed air supply via ball valves, which reduces the tank volume accordingly and thus builds up the pressure more quickly.
• Fifteen-year warranty against rusting through on the inside and outside of hot-dip galvanized compressed air tanks
• All tank batteries can be easily moved with the lift truck

• Hot-dip galvanised inside and outside with fifteen-year warranty against rusting through
• Built according to EC Directive 87/404/EEC or DGRL 97/23/EC -AD 2000, module: H / H 1

• Ideal in combination with prefabricated solutions
• Permanently sealed without pressing
• Installation even in confined spaces
• Detachable fittings can be reused
• Cost savings through quick assembly

• Permanently sealed without pressing
• Cost savings through quick and easy assembly
• Ideal in combination with prefabricated solutions
• Compatible with other standards-compliant pipes
• No confusion of contours possible
• Installation even in confined spaces
• Extraction forces far beyond the requirements of the standard
• Pipe components can be dismantled and reused
• Numerous national and international approvals
• O-rings included

• For connecting two housings with each other
• Angle for wall mounting included
• Connection set can also be used with housings from other manufacturers