UUTUUDET

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 6
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Main spindle runs in oil bath
• Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Substructure and machine bed cast in one piece from Meehanite cast iron
• Emergency stop device with foot actuation
• Quadruple steel holder

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precisely manufactured
• Powerful, maintenance-free engine
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.009 mm
• Concentricity on the lathe chuck ≤ 0.04 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Leadscrew stored in two sintered bearings
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Rolled trapezoid spindles
• Thrust bearing
• Tapered roller bearings in P5 quality
• Hardened main spindle mounted in adjustable precision tapered roller bearings
• Hardened spindle nose with Ø 26 mm spindle bore
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Upper slide on cross slide slidable
• Chip protection on the upper slide
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Quick, easy and tool-free adjustment of the tailstock by a clamping lever
• Emergency stop impact switch
• Quadruple tool holder
• 3-jaw lathe chuck in the standard scope of delivery
• Change gear set in the standard scope of delivery for thread cutting
• Fully equipped, allowing the user to be productive immediately after commissioning
• TU 2506VB: Speed change easily adjustable via potentiometer

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 6
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Main spindle runs in oil bath
• Smooth-running gear wheels, hardened and ground with 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• All metric pitches in the range from 0.2 to 14 mm/rev and all inch threads in the range from 72 - 2 threads per inch can be adjusted without replacing the change gears using the switch lever in the control panel
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function according to EN23125 in the X- and Z-axis
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant system with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Substructure and machine bed cast in one piece from Meehanite cast iron
• Emergency stop device with foot actuation
• Quadruple steel holder

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Tempered and polished Z-axis guide rail
• Spindle holder Camlock DIN ISO 702-2 No. 4
• Guaranteed concentricity of spindle nose better than 0.015 mm
• Free moving feed gear with rounded gear wheels running in an oil bath
• Emergency stop push button
• Tempered main spindle borne on adjustable, precision taper roller bearings
• Hand wheels on slide with adjustable fine scaling 0.04 / 0.01 mm
• Ribbed grey cast steel prism bed with strong ribbing, induction tempered and precision ground
• Concentricity at chuck better than 0.04 mm
• Quadruplicate tool holder
• All guides adjustable using cleats
• Tempered spindle nose
• Leading spindle for thread tapping or automatic longitudinal turning
• Leading and feed spindles borne on two sintered bearings
• Automatic longitudinal/cross feeds
• Tailstock adjustable ± 5 mm for turning spheres
• Tailstock spindle sleeve and handwheel with adjustable fine scaling 0.02 mm
• Fast, easy adjustment of tailstock without tools thanks to clamping lever

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.009 mm
• Concentricity on the lathe chuck ≤ 0.05 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Right/left rotation switchable in the control panel
• Roll-rolled trapezoidal spindles
• Thrust bearing
• Precisely machined slide
• Lead screw mounted in two sintered bearings
• All guides can be adjusted using wedge strips
• Handwheels with adjustable fine scaling 0.04 / 0.01 mm
• Tailstock for taper turning adjustable ± 5 mm
• Tailstock quill and handwheel with adjustable fine scaling 0.02 mm
• Emergency stop switch
• Quick, easy and tool-free adjustment of the tailstock using a clamping lever
• Quadruple steel holder
• Main spindle bearing of tolerance class P5
• Hardened spindle nose
• Set of interchangeable gears for thread cutting included as standard
• Extensive range of accessories
• Retains its value

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de