UUTUUDET

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• Radius / Diameter mode
• Parameter memory
• Inch / metric adjustment
• Multifunction LCD display
• Adjustable angle measurement
• Absolute / incremental
• 8-digit LCD display
• Coordinate conversion

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Machine bed made of heavily ribbed cast iron
• One-piece machine base made of steel
• High rigidity of the headstock housing thanks to heavily ribbed 25GG casting
• All gear wheels of the feed gear made of hardened steel
• Shafts on needle bearings, all components are lubricated in an oil bath
• Hardened and ground face spindle ensures enormous accuracy and durability
• High chip removal during roughing is no problem thanks to the high cutting capacity
• Service-friendly removable rear panel
• Energy chain for gentle cable and hose guidance
• Lockable chip guard moves with the bed slide with integrated position indicator and coolant hose, can be moved manually
• Decoupled handwheels tested in accordance with EN 23125
• Two-channel right/left switch tested in accordance with EN 23125
• No change wheels necessary
• Switch with life cycle calculation tested in accordance with EN ISO 13849
• With safety device to prevent simultaneous operation of tapping and feed mechanism
• Bed guides hardened and precision ground
• Electronically braked motor
• Electronic feed cut-off of the Z-axis
• All electronic controls can be reached centrally
• Complete illumination of the work area
• External coolant tank with level indicator and oil separator
• Complete lead and feed spindle cover
• Electric position stop with quadruple position stop
• Three-jaw lathe chuck included as standard
• Quick-change steel holder SWH 7-C
• 1 steel holder 32 x 130 type D for square chisel 25 mm
• Digital position indicator DPA 32-3

TX 5216

• Large spindle bore Ø 80 mm

TX 6222:

• Large spindle bore Ø 105 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@stuermer-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• The electronic measuring components of the measuring strips are protected and sealed in the housing
• Allows accurate and reliable measuring results even if the measuring system is installed in Öl or cooling liquids
• Tolerant against vibrations and magnetic interference
• Without mounting

Note: Adjustments may have to be made to the machine for mounting the measuring bars
Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose ≤ 0.015 mm
• Shafts, wheels and main spindle run in an oil bath
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using gibs
• Mechanical longitudinal feed cut-off of the bed slide with four adjustable eccentrics
• Right/left rotation on the bed slide switchable via switching spindle
• Two-channel safety electronics
• Central lubrication in the bed slide
• Upper slide adjustment range ± 90
• Smooth-running gear wheels, hardened and ground, mounted on 2 adjustable precision tapered roller bearings
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Large chip guard with integrated LED machine lamp
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety handwheels with disengagement function in accordance with EN23125 in the X and Z axes
• High-speed feed gearbox in closed design, gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Scale of the threaded clock adjustable
• Tailstock for taper turning adjustable ± 10 mm
• Tailstock quill and handwheel with adjustable fine scale 0.025 mm
• Quick, easy and tool-free adjustment of the tailstock using a clamping lever
• Cable routing via energy chain
• Heavily ribbed prism bed, induction-hardened and precision-ground from gray cast iron
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Emergency stop device with foot actuation

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Hardened and ground Z-axis guideway
• Guaranteed concentricity of the spindle nose better than 0.015 mm
• Spindle holder Camlock DIN ISO 702-2 No. 8
• Lead screw cover
• Precisely machined slide
• All guides can be adjusted using wedge strips
• Right/left rotation on bed slide switchable via switching spindle
• Two-channel safety electronics
• Upper slide adjustment range ± 90
• Smooth-running, hardened and ground gear wheels mounted on 2 adjustable precision tapered roller bearings
• Clearly arranged selector lever for switching the feed speeds
• Closed design of the high-speed feed gearbox
• Gear wheels and shafts hardened and ground, running in an oil bath in precision bearings
• Handwheels decoupled and tested in accordance with EN 23125
• Safety handwheels with disengagement function in the X-axis
• Handwheels with adjustable fine scaling 0.04 / 0.02 mm
• Safety limit switch with positive opening contacts
• Switch with life cycle calculation, tested in accordance with EN ISO 13849
• Central lubrication in the bed slide
• Emergency stop switch, motor protection switch, lockable main switch
• LED machine lamp
• Energy chain for gentle cable and hose routing
• Emergency stop device with foot control
• Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning in accordance with DIN
• Electric motor brake with quick emergency stop - quick stop without overrun during normal operation
• Electrical system with Siemens components
• Quick-change steel holder SWH 9-D
• 1 steel holder 41 x 180 type D for square chisel 32 mm

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Versatile application
• Robust machine construction
• Smooth running due to polished gear wheels running in oil bath
• Heavy, solid design made of high-quality Meehanite cast iron
• All guides are hardened and adjustable by means of wedges
• Central lubrication
• Large sized handwheels with scale
• LED machine lamp
• Coolant system
• Easy operation of the switching elements
• Stable flat bed guide in the Y and Z axis
• Table feed X, Y and Z axis automatically
• Digital position indicator DPA 21
• Feed system can be controlled in fixed stages by means of a servomotor
• Decoupled handwheels
• Massive and large dimensioned XY stage, precisely surface-finished with adjustable wedges and adjustable end stops
• Horizontal milling position
• Counterhold Horizontal milling ready to hand attached to the back of the machine
• Milling head with two axes of rotation, thus pivotable and rotatable in every spatial angle

OPTI control panel:

• Integrated control panel
• Integrated digital position indicator
• Rotatable around its own axis

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Magnetic tape for mounting on machines where the space for magnetic scales is insufficient
• Plug 9-pin

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de

• Precise processing
• Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
• Hardened and ground Z-axis guideway
• Smooth-running feed gear with rounded gears running in an oil bath
• Guaranteed concentricity of the spindle nose better than 0.009 mm
• Concentricity on the lathe chuck better than 0.04 mm
• Quadruple tool holder
• All guides can be adjusted by wedge strips
• Right / left rotation in the control panel switchable
• Hardened main spindle mounted in adjustable, precision tapered roller bearings
• Tapered roller bearings in P5 quality
• Hardened spindle nose
• Large spindle bore Ø 38 mm
• Lead screw for thread cutting or automatic longitudinal turning
• Guide and feed shaft stored in two sintered bearings
• Automatic longitudinal / flat feeds
• Lead screw and tension spindle cover
• Tailstock for taper turning ± 5 mm adjustable
• Tailstock quill and handwheel with adjustable fine scale 0.02 mm
• Fast, easy and tool-free adjustment by means of a clamping lever
• Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
• Change wheel set in the standard scope of supply for thread cutting
• Emergency stop impact switch

• Speed change easily adjustable via potentiometer
• Digital speed display
• EMC filter class C1

Manufacturer
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26, 96103 Hallstadt, Germany
info@optimum-maschinen.de