The 12 x 150 mm ground concrete drill bit 56T307 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 12 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Velcro sanding discs 150 mm, P60, 5 pieces, unperforated 58T172 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P60 - the sharpest - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing is made of type C paper and is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
Water sandpaper 230 x 280 mm, P280, 58T218 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible C latex backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
Jigsaw blade, 15 TPI, BIM, T-handle, 2 pieces, clean cut 57T550 by GRAPHITE is a jigsaw blade with 15 TPI tooth density, made of BIM and fitted with a T-handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.27 mm and a tooth spacing of 1.7 mm. Suitable for cutting hardwood, laminate or plasterboard (<30 mm) The GRAPHITE brand blade enables clean cutting.
GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
The 80 mm wire wheel brush, crimped wire, brassed with 6 mm shank 57T405 by GRAPHITE is made of crimped brassed wire. Its maximum speed is 4,500 rpm. The product meets the requirements of EN 1083-2 and comes with a 6mm shank, allowing it to work with any drill or screwdriver. The GRAPHITE wire brush is a versatile product for many tasks.
The SDS Plus Concrete Drill with Double Spiral 8 x 210 mm 56T110 by GRAPHITE is a concrete, brick and stone drill bit with double spiral and SDS Plus chuck. It features a diameter of 8 mm and an overall length of 210 mm and a working length of 140 mm. It will prove useful for many tasks around the home and in the workshop.
The GRAPHITE 57T503 plunge-cutting, BIM Co 8%, 65 mm blade 57T503 is a tool for multifunction machines with a blade width of 65 mm. It is made from bi-metal (BIM) with 8% cobalt (Co8%). The GRAPHITE blade is designed for plunge cutting wood, wood with nails, metal, plastic and plasterboard. It has a tooth pitch of 1.4mm, 18 TPI, a maximum cutting depth of 40mm and a blade thickness of 0.8mm. Recommended for precision work in a wide variety of materials.
Glass drill bit 4 mm 54T412 by GRAPHITE characterised by a diameter of 4 mm and an overall length of 68 mm. Equipped with a 3.5 mm cylindrical shank. It will prove its worth when working with glass. GRAPHITE drill bit is recommended for DIY enthusiasts.
Velcro sanding discs 125 mm, P80, 5 pieces, with 8 holes 58T290 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 125 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
The GRAPHITE 57T303 solid diamond cutting wheel, 180 x 25.4 mm, wet 57T303 is a solid diamond cutting wheel with a diameter of 180 mm and a mounting hole of 25.4 mm. A practical reduction ring is included. The cutting segment is 5 mm high and 2.2 mm wide. The maximum speed of the disc is 8 600 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of the EN13236 standard. It is designed for cutting terracotta, stoneware, granite and marble.
GRAPHITE's SDS Plus double helix concrete drill bit 10 x 350 mm 56T119 is a concrete, brick and stone drill bit with a double helix and SDS Plus chuck. It features a diameter of 10mm and an overall length of 350mm and a working length of 265mm. It will prove useful for many tasks around the home and in the workshop.
Turbo diamond cutting wheel, 125 x 22.2 mm, dry 57T317 by GRAPHITE is a turbo dry cutting wheel with a diameter of 125 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 12 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
HSS-G metal drill bits, 2 - 8 mm, set of 13 pieces, 54T920 by GRAPHITE are metal drill bits characterised by diameters of 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8 mm. They are made of HSS-G high speed steel. They have a cylindrical shank and a 118° drill point angle. They comply with DIN 338 and are suitable for every DIY enthusiast.
Turbo diamond cut-off wheel, 115 x 22.2 mm, dry and wet 57T316 by GRAPHITE is a dry and wet turbo diamond cut-off wheel with a diameter of 115 mm and a mounting hole of 22.2 mm. A practical reduction ring is included. The cutting segment is 7 mm high and 2.2 mm wide. The maximum speed of the disc is 13 200 rpm, corresponding to 80 m/s. The GRAPHITE blade meets the requirements of EN 13236 and is designed for cutting stone, brick, marble, granite and concrete.
The spiral wood drill, 14 x 230 mm 54T554 by GRAPHITE is a drill bit designed for working with wood and plywood, equipped with a hexagonal chuck, and with a spiral design. It features a diameter of 14 mm and a length of 230 mm. Adapted for tasks with a maximum speed of 1500 rpm. Will work well for many DIY tasks.
HSS-TiN metal drill bits 4.0-10 mm, 5 pieces 57-196 by NEO TOOLS are drills that are deeply ground according to DIN 338 and made of 9341 steel; they have a tip angle of 135° with C-type shear correction and a cylindrical chuck for easy drilling without scoring. An additional titanium nitride (TiN) coating reduces cutting resistance and helps maintain high hole quality - especially when working on drill stands. The working part lengths are 4:43 mm, 5:52 mm, 6:57 mm, 8:75 mm, 10:87 mm, and the overall lengths are 4:75 mm, 5:86 mm, 6:93 mm, 8:117 mm, 10:133 mm; while the recommended speed range for metal is 4:1850-2000 rpm, 5:1450-1600 rpm, 6:1200-1300 rpm, 8:900-1000 rpm, 10:750-850 rpm. The purpose of drills from NEO TOOLS includes steel, cast iron, non-ferrous metals (copper, aluminium, brass) and plastics.
Sanding discs, perforated, Velcro with holes 225 mm, P120, 5 pieces 58T274 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
GRAPHITE's delta sanding papers, Velcro 93 x 93 mm, P60, 5 pieces, with 6 holes 58T325 are papers available in a set of 5 pieces with 6 holes, for metal, wood and plastics. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
HSS metal drill bit, DIN 340, 13 mm, 54T912 by GRAPHITE is a metal drill bit characterised by a diameter of 13 mm, an overall length of 205 mm and a working part length of 134 mm. It is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It features compliance with DIN 340 and is suitable for any DIY enthusiast.
