Jigsaw blade, 6 TPI, HCS, U-shaped handle, 2 pieces, clean cut 57T524 by GRAPHITE is a jigsaw blade with 6 TPI tooth density, made of HCS and equipped with a U-shaped handle. The set includes 2 pieces. It has an overall length of 100 mm, a working length of 74 mm, a width of 8 mm, a thickness of 1.5 mm and a tooth spacing of 4 mm. Suitable for cutting softwood, chipboard, carpenter's plywood and fibreboard 10-45 mm thick. The GRAPHITE brand blade enables clean cutting.
The combination disc for 59G371, 57H696 by GRAPHITE is a disc designed for the paving machine with part number 59G371. The 150mm diameter triple set, with a 22.2mm mounting hole, is designed for grooving in concrete - no chiselling required. The cross-shaped segments create a clean 30 mm wide slot, making it easy to achieve even furrows. The GRAPHITE saw blade features 36 segments with a diamond segment height of 9.5 mm and an overall width of 27 mm, and has a maximum speed of 10,200 rpm. The product meets the requirements of EN 13236, which confirms its suitability for working with concrete.
GRAPHITE's 33mm 56T738 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
The Hex 3.0 mm 56T400 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 3 mm, an overall length of 60 mm and a working length of 14 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
The Hex 4.0 mm 56T401 concrete drill bit by GRAPHITE is a hex shank HEX drill bit with a diameter of 4 mm, an overall length of 75 mm and a working length of 23 mm. Recommended for working with hard materials including: concrete, brick and stone. The GRAPHITE concrete drill bit will be suitable for do-it-yourselfers.
Iron sanding papers, Velcro 98 x 140 mm, P180, 5 pieces, with 5 holes 58T321 by GRAPHITE are papers available in a set of 5 pieces with 5 holes, designed for metal, wood and plastic. The sheets use a type C paper base, suitable for machine sanding. They have a semi-open mesh with 100% abrasive grain (electrocorundum) on the surface, ensuring efficient working and reducing clogging. The Velcro attachment allows easy and quick attachment to the tool.
Sanding discs, perforated, Velcro with holes 225 mm, P80, 5 pieces 58T272 by GRAPHITE is a set of 5 pieces of sanding discs, designed for sanding plaster and drywall. It is compatible with "giraffe" type sanders and cantilever devices, with a diameter of 225 mm. GRAPHITE discs are equipped with perforated holes on the entire surface, so that the sanding dust is discharged smoothly during work. At the same time, the work surface does not get too hot during sanding, and the Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by an electro-corundum grain and an open type of grit. GRAPHITE abrasive discs are recommended for many tasks.
The 10 TPI, HCS, 65 mm 57T508 plunge-cutting blade for the multifunction machine by GRAPHITE is a tool made of durable carbon steel (HCS), with a working width of 65 mm and 10 TPI. The blade is designed for plunge cutting in wood. The use of three-sided sharpened teeth and their spacing of 2.5 mm - enables fast and precise cutting. The maximum cutting depth is 40 mm and the blade thickness is 0.7 mm. The Multifunction Saw Blade from the GRAPHITE brand is the choice for efficient wood cutting in assembly and renovation work.
The TiN Universal Drill, 12 mm 54T409 by GRAPHITE is a drill bit coated with TiN and fitted with a cylindrical chuck. It features a diameter of 12 mm and an overall length of 85 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
HSS metal drill bit, DIN 340, 11 mm, 54T911 by GRAPHITE is a metal drill bit characterised by a diameter of 11 mm, an overall length of 195 mm and a working part length of 128 mm. It is made from HSS high speed steel. It has a cylindrical chuck and a 118° drill sharpening angle. It features compliance with DIN 340 and is suitable for every DIY enthusiast.
The 12 x 250 mm ground concrete drill bit 56T308 by GRAPHITE is a ground concrete, brick and stone drill bit with a standard cylindrical chuck. It features a diameter of 12 mm, an overall length of 250 mm and a working length of 150 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Velcro sanding discs 150 mm, P150, 5 pieces, unperforated 58T176 by GRAPHITE are unperforated discs for metal, wood and plastic. Gradation P150 - a fine grade - allows appropriate sanding, according to the needs and the stage of surface preparation. The backing made of type C paper is suitable for machine use. The electro-corundum abrasive coating ensures high efficiency, and the Velcro fastening allows GRAPHITE discs to be changed quickly and conveniently.
The Wood Drill, Extended 12 x 250 mm 54T568 by GRAPHITE is a drill bit designed for working with wood and plywood and features a cylindrical chuck. It features a diameter of 12 mm and a length of 250 mm. Suitable for tasks with a maximum speed of 1500 rpm. It will work well for many DIY tasks.
The 115 mm wire wheel brush, twisted steel wire, M14, 57T432 by GRAPHITE with a diameter of 115 mm is made of twisted steel wire. Equipped with an M14 thread, it is designed for use with angle grinders. The maximum speed of the tool is 12500 rpm. The product meets the requirements of EN 1083-2 and is well suited for roughing metal surfaces, aggressive cleaning, removing rust, paint or dirt.
Hex chamfer set, 12, 16, 19 mm, set of 3 pieces 54T423 by GRAPHITE are tools for making a chamfer in a drilled hole to hide (flush) the head of a screw or bolt in the material - wood, aluminium and plastic. The chamfers have a ¼" HEX type handle and are characterised by overall lengths of 40, 45 and 45 mm. They will be suitable for screwdrivers and drill drivers. A set of chamfers from the GRAPHITE brand will prove useful in every DIY enthusiast's toolbox.
GRAPHITE's 19mm bi-metal hole saw 56T702 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 460 rpm, Inox steel - 230 rpm, aluminium - 690 rpm, wood - 680 rpm, cast iron - 300 rpm, brass - 600 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Velcro sanding discs 150 mm, P150, 5 pieces, with 8 holes 58T280 by GRAPHITE is a set of 5 sanding discs, designed for sanding metal, plastic and wood. It is compatible with orbital and eccentric sanders, with a diameter of 150 mm. The GRAPHITE discs are fitted with 8 holes so that sanding dust is freely discharged during use. The Velcro attachment allows for quick replacement of a worn accessory. The discs are characterised by their electro-corundum coating. Their abrasive backing is made of paper. GRAPHITE abrasive discs are recommended for many tasks.
The TiN, 6 mm 54T405 universal drill bit by GRAPHITE is a TiN coated drill bit and fitted with a cylindrical chuck. It features a diameter of 6 mm and an overall length of 72 mm. The maximum rotational speed is 1000 rpm. The GRAPHITE universal drill bit is designed for use in wood, metal, concrete, ceramics and plastics.
The 6 x 150 mm ground 56T302 concrete drill bit by GRAPHITE is a ground drill bit for concrete, brick and stone, fitted with a standard cylindrical chuck. It features a diameter of 6 mm, an overall length of 150 mm and a working length of 90 mm. The GRAPHITE drill bit will prove useful in domestic applications.
Water sandpaper 230 x 280 mm, P360, 58T220 by GRAPHITE is a water-based hand sanding paper. It has a full grain electro-corundum coating, 100% coverage and a flexible latex C backing. It is suitable for wood, metal, paint, plastic, glass and plasterboard. This type of GRAPHITE brand sandpaper has been developed for use with water. Its special surface is coated with an abrasive layer which forms an abrasive paste on contact with the liquid. It makes the sanding process more efficient. The water also prevents the accumulation of dust, keeping the surface clean and increasing the efficiency of sanding. Working with wet sandpaper also minimises the risk of damage to the surface. The GRAPHITE brand is recommended for DIY enthusiasts.
