The 12 mm x M14 diamond hole saw, 55-303 by NEO TOOLS, with a diameter of 12 mm and M14 thread, is designed for dry work with an angle grinder. The durable vacuum brazed (vacuum brazed) diamond blank and paraffin filling ensures cooling during drilling. The working length is 30 mm and the overall length is 60 mm, facilitating the drilling of typical mounting holes. The maximum speed is 11,000 rpm. Applications include ceramic, stoneware, stone and concrete.
The 85 mm widia hole saw with SDS+ adapter and pilot drill 55H323 by GRAPHITE characterised by a hole saw diameter of 85 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The inner diameter is 79 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.
Diamond holesaws (18, 22, 27, 35 mm), 4-piece set 55H318 by GRAPHITE is a set of four holesaws with diameters: 18, 22, 27, 35 mm, which are made from robust C45 steel. They feature a maximum drilling depth of 30 mm and a speed of up to 13,000 revolutions per minute. With an M14 chuck and HV hardness of 175-200, they are versatile in use. They work best with ceramics, stoneware, concrete, clinker and stone. The D46 grit size and 10 mm diamond coating height ensure clean and precise cutting even in demanding conditions. The GRAPHITE diamond hole saw set is recommended for professionals as well as DIY enthusiasts.
With a diameter of 60 mm, the 60 mm NEO TOOLS bi-metal hole saw 57-909 from NEO TOOLS allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 150 rpm, copper - 200 rpm, aluminium - 225 rpm, stainless steel - 75 rpm, plastic - 1500 rpm, wood - 2000 rpm. This is a versatile tool for professional and amateur use.
The 58G540 82 × 450 mm × 8T, 57H861 diamond drill hole saw by GRAPHITE is a hole saw designed for the diamond drill with part number 48G540. The accessory is characterised by a diameter of 82 mm and a length of 450 mm. It has 8T teeth with a height of 10 mm and a 1.1/4 UNC thread. The GRAPHITE brand hole saw is made from robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramic, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.
NEO TOOLS' 140 mm diameter bi-metal hole saw 57-919 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with various materials. Maximum speeds are: steel - 95 rpm, copper - 120 rpm, aluminium - 140 rpm, stainless steel - 40 rpm, plastic - 900 rpm, wood - 1200 rpm. This is a versatile tool for professional and amateur use.
Widia hole saw 65 mm with SDS+ adapter and pilot drill 55-321 by NEO TOOLS characterised by a hole saw diameter of 65 mm, a height of 72 mm and a maximum drilling depth of 50 mm. It is equipped with 8 widia with a width of 2.2 mm. The internal diameter is 59 mm and the parameters of the pilot drill are 8 x 110 mm. The length of the entire set is 180 mm. The NEO TOOLS brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has the ability to drill with impact and is also designed for drilling holes in concrete. It makes it possible to prepare holes for installation boxes. The NEO TOOLS brand hole saw will prove useful in the profession of a construction worker, DIY enthusiast and electrician.
Diamond drill hole saw 58G540 112 × 450 mm × 10T, 57H863 by GRAPHITE is a hole saw designed for the diamond drill with part number 48G540. The accessory is characterised by a diameter of 112 mm and a length of 450 mm. It has 10T teeth with a height of 10 mm and a 1.1/4 UNC thread. The GRAPHITE brand hole saw is made from robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramic, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.
The 85 mm forked hole saw with Hex adapter and pilot drill 55H326 by GRAPHITE is a forked hole saw set offered with Hex adapter and pilot drill, recommended for concrete. The hole saw features a diameter of 85mm, a height of 72mm and a drilling depth of 50mm. It has an M22 thread and has been manufactured from robust TCT steel. The drill bit, on the other hand, has a length of 110 mm and a diameter of 8 mm. The 40 Cr steel adapter has a total length of 190 mm. This is an indispensable set of widia hole saw, with Hex adapter and GRAPHITE pilot drill bit for professionals and DIY enthusiasts.
Diamond hole saw extension for drill rig 58G540 length 555 mm 57-899 by NEO TOOLS is an accessory for GRAPHITE drill rig with part number 58G540. It is characterised by an overall length of 555 mm, a threaded height of 11/4" with a height of 55 mm. It will work well in both professional and amateur applications.
Diamond hole saw for drill rig 58G540 132 × 450 mm × 11T, 57H867 by GRAPHITE is a hole saw designed for diamond drill rig with part number 48G540. The accessory is characterised by a diameter of 132 mm and a length of 450 mm. It has 12T teeth with a height of 10 mm and a 1.1/4 UNC thread. The GRAPHITE brand hole saw is made from robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramic, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.
With a diameter of 57 mm, the 57-924 bi-metal hole saw by NEO TOOLS allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with a variety of materials. Maximum speeds are: steel - 150 rpm, copper - 200 rpm, aluminium - 225 rpm, stainless steel - 75 rpm, plastic - 1500 rpm, wood - 2000 rpm. This is a versatile tool for professional and amateur use.
NEO TOOLS' 25 mm diameter bi-metal hole saw 57-908 allows precise drilling of holes with a maximum depth of up to 38 mm. Equipped with teeth with a 6/4 TPI pitch, it is suitable for working with various materials. Maximum speeds are: steel - 350 rpm, copper - 470 rpm, aluminium - 525 rpm, stainless steel - 175 rpm, plastic - 2000 rpm, wood - 2700 rpm. This is a versatile tool for professional and amateur use.
The 80 mm widia hole saw with SDS+ adapter and pilot drill 55H322 by GRAPHITE characterised by a hole saw diameter of 80 mm, a height of 72 mm and a drilling depth of 50 mm. It is equipped with 10 widia with a width of 2.2 mm. The internal diameter is 74 mm and the fi drill parameters are 8 x 110 mm. The length of the entire set is 163 mm. The GRAPHITE brand hole saw is offered in a set with an SDS+ adapter and a pilot drill bit. It has hammer drilling capability and is also designed for drilling holes in concrete and brick. It makes it possible to prepare holes for installation boxes. The fine-grain carbide blades with increased wear resistance extend the life of the tool. The hole saw will prove useful in the professions of builders, DIY enthusiasts and electricians.
Diamond hole saw for drill rig 58G540 62 × 450 mm × 6T, 57-859 by NEO TOOLS is a hole saw designed for diamond drill rig with part number 58G540 GRAPHITE. The accessory is characterised by a diameter of 62 mm and a working height of 420 mm and a total height of 450 mm. It has 6T teeth with a height of 10 mm and a 1.1/4 UNC thread. The NEO TOOLS brand hole saw is made of robust steel. It has a seamless tube and laser-welded teeth. It will be indispensable when working with concrete, reinforced concrete, ceramics, granite or asphalt. Recommended for professional use as well as for a variety of DIY tasks.
GRAPHITE's 53mm 56T740 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 33mm 56T738 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 19mm bi-metal hole saw 56T702 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 460 rpm, Inox steel - 230 rpm, aluminium - 690 rpm, wood - 680 rpm, cast iron - 300 rpm, brass - 600 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
With a height of 44 mm, GRAPHITE's 64 mm bi-metal hole saw 56T714 allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 135 rpm, Inox steel - 65 rpm, aluminium - 205 rpm, wood - 180 rpm, cast iron - 90 rpm, brass - 180 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 6.35mm pilot drill adapter for bi-metal holesaws 32-152mm, Hex 56T754 is designed for bi-metal holesaws with diameters from 32 to 152mm. It has a 7/16" HEX shank. The pilot drill bit is made of HSS material. The adapter is used when drilling in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The set includes a screw-mounted guide drill bit. The GRAPHITE brand adapter is designed for mounting bi-metal holesaws in drills.
