The 40 mm bi-metal hole saw 56T709 by GRAPHITE, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 220 rpm, Inox steel - 110 rpm, aluminium - 330 rpm, wood - 290 rpm, cast iron - 145 rpm, brass - 290 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 30mm 56T734 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws 26 - 63 mm, h 25 mm, set of 7 pieces 56T749 by GRAPHITE is a set containing 7 pieces with diameters: 26, 32, 38, 45, 50, 56 and 63 mm. The height of each hole saw is 25 mm and the maximum drilling depth is 18 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
GRAPHITE's 20mm 56T732 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws with adapter 19 - 64 mm, set of 12 pcs. 56T748 by GRAPHTE is a set of wood hole saws with adapter, which includes eight pieces with diameters from 19 to 64 mm, allowing holes up to 25 mm deep. The set also includes an Allen spanner, adapters with a 7.8 and 9.5 mm shank and a 6 mm diameter centre drill bit. GRAPHITE holesaws are suitable for working in wood, plasterboard and plastic, with a maximum speed of 2,000 rpm.
GRAPHITE's 32mm bi-metal hole saw 56T707 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 275 rpm, Inox steel - 140 rpm, aluminium - 410 rpm, wood - 370 rpm, cast iron - 180 rpm, brass - 360 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 10mm 56T728 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 16mm 56T731 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
Wood hole saws 60 - 95 mm, h 40 mm, set of 5 pieces 56T746 by GRAPHITE is a set containing 5 pieces with diameters: 60, 67, 74, 81, 95 mm. The height of each hole saw is 40 mm and the maximum drilling depth is 32 mm. The maximum rotational speed is 1500 rpm. The product is designed for drilling in wood, plasterboard and plastic.
Diamond drill bits 4-12 mm with guide, set of 8 pieces 56T737 by GRAPHITE contains a set of diamond drill bits with diameters: 4, 5, 6, 7, 8, 10 and 12 mm, made with a diamond coating. The tools are designed for a maximum speed of 2500 rpm and a drilling depth of up to 35 mm. The kit comes with a guide with a practical suction cup for drilling and with 7 holes with diameters: 4, 5, 6, 7, 8, 10 and 12 mm. The GRAPHITE branded set consists of 8 components that are indispensable when renovating - it is suitable for wet and dry work with terracotta, stone, porcelain stoneware, glass and ceramic tiles.
GRAPHITE's 41mm bi-metal hole saw 56T710 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 210 rpm, Inox steel - 105 rpm, aluminium - 315 rpm, wood - 230 rpm, cast iron - 140 rpm, brass - 280 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
Hole saws with adapter, 32-54 mm, set of 6 pieces 56T722 by GRAPHITE contains six pieces. The set includes holesaws with diameters: 32 mm, 38 mm, 51 mm and 54 mm. Included - an adapter with a 6 mm diameter pilot drill bit and an Allen spanner, allow for wider use. The height of each hole saw is 28 mm and the drilling depth is 25 mm. Maximum speed during operation is 1100 rpm. The GRAPHITE branded set is designed for drilling holes in wood, plastic and plasterboard using a drill or drill/driver.
GRAPHITE's 51mm 56T712 bi-metal hole saw, 44mm high, allows drilling to a depth of 38mm. It is made from HSS high-speed steel and has a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 170 rpm, Inox steel - 85 rpm, aluminium - 255 rpm, wood - 200 rpm, cast iron - 115 rpm, brass - 230 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
The SDS Plus adapter and pilot drill bit with M22 110 mm thread 55-331 by NEO TOOLS is a set of SDS Plus adapter and pilot drill bit with M22 110 mm thread, designed for a variety of construction and renovation tasks. The adapter features a total length of 110 mm. The drill bit is 110 mm long and has a diameter of 8 mm. NEO TOOLS tool recommended for professionals as well as DIY enthusiasts.
GRAPHITE's 83mm bi-metal hole saw 56T719 is 44mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 105 rpm, Inox steel - 50 rpm, aluminium - 155 rpm, wood - 140 rpm, cast iron - 70 rpm, brass - 140 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 40mm 56T736 diamond hole saw has a brazed diamond blank and a cylindrical shank. It is designed for efficient drilling in stoneware, ceramics, glass and brick. It can work either wet or dry, and the drilling itself is done without impact. The maximum speed of the hole saw is 3000 rpm, while its maximum drilling depth is 30 mm. The GRAPHITE-branded tool is designed for drilling with a drill or a screwdriver.
GRAPHITE's 68 mm 56T716 bi-metal hole saw, with a height of 44 mm, allows drilling to a depth of 38 mm. It is made from HSS high speed steel and is fitted with a 5/8'' x 18 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T754 adapter with pilot drill bit for bi-metal holesaws in the 32-152 mm range. Maximum speeds for this tool, vary depending on the material: steel - 130 rpm, Inox steel - 65 rpm, aluminium - 190 rpm, wood - 165 rpm, cast iron - 85 rpm, brass - 165 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
GRAPHITE's 56T745 pilot drill bit for tungsten holesaws has a hexagonal shank, its overall length is 140 mm and its diameter is 9 mm. It is designed for use with the 56T744 tungsten hole saw blade. It is used for work in bricks, hollow blocks, cellular concrete, plasterboard and lightweight building materials. The GRAPHITE brand pilot drill has a tapered sharpened fork tip for drilling pilot holes. In combination with the 56T744 disc and 56T738-56T742 hole saws, it makes a practical drilling set.
GRAPHITE's 73mm 56T742 tungsten tipped hole saw is designed for use in brick, hollow block, cellular concrete, plasterboard and lightweight building materials. It has a height of 68mm and provides a drilling depth of 57mm. The cutting edge of the hole saw is coated with a tungsten carbide coating and has a maximum speed of 1,200 rpm. The tool is designed for use with the 56T744 tungsten carbide hole saw blade and 56T745 pilot drill. It can be used for any installation work, such as fitting power sockets, distribution boxes or pipes. It can also be used for cable conduit pipes, ventilation pipes or installation fans in the kitchen or bathroom.
GRAPHITE's 27mm bi-metal hole saw 56T705 is 51mm high and allows drilling to a depth of 38mm. It is made from HSS high speed steel and is fitted with a 1/2'' x 20 UNF thread. It is designed to work in metal, stainless steel (Inox), cast iron, brass, aluminium and wood. The GRAPHITE hole saw is recommended to be used with the 56T753 adapter with pilot drill bit for bi-metal hole saws in the 14-30 mm range. Maximum speeds for this tool, vary depending on the material: steel - 325 rpm, Inox steel - 160 rpm, aluminium - 480 rpm, wood - 430 rpm, cast iron - 215 rpm, brass - 435 rpm. The bi-metal hole saw is designed for use with a drill or drill/driver.
